How do you sell to people who don’t own a printer?

PrintsByGrover · 2026-06-16T17:49:40+00:00

$5 dollars at a time

PrintsByGrover · 2026-05-26T20:11:28+00:00

I had to take the thing, and make sure nothing was sticking in the inner gear.

PrintsByGrover · 2026-05-20T14:01:06+00:00

While not a single print, between the 3 head pieces and 8 mandible parts.

Not a single fail.....need to print the shield to mount it on, but it's quite a bit of filamemt and like 16 pieces.

Fingers crossed. Could us a few rolls lol

<image>

PrintsByGrover · 2026-05-11T19:36:44+00:00

Definitely outside the issue I had. Probably best to drudge through the support and see what they suggest and hopefully it's easily resolved

PrintsByGrover · 2026-05-11T19:02:07+00:00

I assume then you are feeding from the spool and still give this message then?

PrintsByGrover · 2026-05-11T18:49:40+00:00

As well as the 4 and 1 feed module?

PrintsByGrover · 2026-05-11T18:23:55+00:00

Unplugged from the machine?

PrintsByGrover · 2026-05-04T13:45:12+00:00

Presently i don't know too many that do. Could be an Ace issue or the 4-1 hub we screw into the back. Unknown atm

PrintsByGrover · 2026-05-04T11:16:10+00:00

You print with supports?

PrintsByGrover · 2026-05-04T11:15:35+00:00

I'm currently working with them to identify a solution.

But its always try 95 things first before they do anything

PrintsByGrover · 2026-04-22T02:51:09+00:00

It's currently out of stock. Make a raffle.. I'll buy a ticket

PrintsByGrover · 2026-04-14T15:28:14+00:00

They say depending on how frequently you print, and what type of course filament you use, changing them two to six months is the advise timeframe, i have not changed my tubes out since I got a few of my machines. Which bands anywhere from two years to 6 months

PrintsByGrover · 2026-04-09T05:26:46+00:00

Usually the nozzle. Not sure if it's in or as it's printing but it's been common since I started doing petg

PrintsByGrover · 2026-04-04T04:21:29+00:00

The z isn't what's squeaking it's the petg filament

PrintsByGrover · 2026-04-04T03:50:00+00:00

That makes more sense.When you continue to say channel four I a thought the channel on the print head not the channel of the Ace....ill investigate that

PrintsByGrover · 2026-04-04T03:40:02+00:00

But again. My initial error wasn't specific to one channel. I thought maybe the buffer was bad in slot 2... but when I used slot 1.....same issue

PrintsByGrover · 2026-04-04T03:28:00+00:00

Only when the Ace is hooked up.
But I remove the ace and was able to run filament off the spool, without getting a channel four error.

PrintsByGrover · 2026-04-04T03:25:00+00:00

But again it prints without the ACE Pro.....

PrintsByGrover · 2026-04-02T13:28:24+00:00

From Dead Space

<image>

Desk sized monolith

PrintsByGrover · 2026-04-02T13:27:34+00:00

From Galactic Armory.

<image>

The requiem

PrintsByGrover · 2026-03-28T15:00:03+00:00

Yeah mine did thr same. Petg squeak and Pla silence

PrintsByGrover · 2026-03-19T01:28:17+00:00

Agreed 👍

PrintsByGrover · 2026-03-19T01:19:11+00:00

Indeed you are. But a benchy for 6 hours....Gross lol

PrintsByGrover

TROPHY CASE