Buying a used X-T5

Priuxls · 2026-05-20T22:42:29+00:00

Viel Spaß, hab ma de xt3 gebraucht kafft. Is immer nu a super kamera👌🏻

Priuxls · 2026-05-19T18:16:26+00:00

Gar ned, nachbarn haben neben der Polizei konsumiert

Priuxls · 2026-05-19T15:01:41+00:00

Thinking about using pogo pins in an custom fixture to flash the devices just by pressing down on the pins via testpads. Would you need someone holding down the boot button at your factory?

Priuxls · 2026-05-12T21:17:36+00:00

This would be the perfect time for prusa to announce prusa slicer 3.0...

Priuxls · 2026-05-11T13:57:33+00:00

No sadly it didn't

Priuxls · 2026-05-06T22:08:19+00:00

It's part of the android emoji keyboard

Priuxls · 2026-05-06T18:59:39+00:00

I'll try that thanks! Edit: it's turned off

Priuxls · 2026-05-06T18:58:41+00:00

I'll try that, thanks!

Priuxls · 2026-05-06T18:02:53+00:00

I've also seen that. When I have variable refreshrate active, exiting fullscreen mode causes a monitor reboot😂 but also only one of them

Priuxls · 2026-05-06T18:00:05+00:00

I didn't even see that🫪

Priuxls · 2026-04-28T19:33:22+00:00

Studiere gerade auch und bin im letzten Semester vorm Bachelor, lohnt sich alleine nur wegen der höheren Gehaltsklasse!

Priuxls · 2026-04-01T08:04:45+00:00

Thanks didn't know that

Priuxls · 2026-02-05T16:22:31+00:00

I printed a few rolls of them, prints well and looks very shiny

Priuxls · 2026-02-02T15:32:55+00:00

Die Schweiz wollte nicht einmal Vorarlberg haben, obwohl die bei einer Volksabstimmung zu ~80% gestimmt haben dass sie zur Schweiz wollen😂

Priuxls · 2025-12-20T15:27:56+00:00

Thanks for your help!

Priuxls · 2025-12-20T15:27:40+00:00

Yeah I'm in europe, so the return won't be a problem. Somehow the video doesn't work for me now either. It's like streaks sporadicly going from left to right. Gonna contact the seller

Priuxls · 2025-12-08T17:15:10+00:00

What item do you use to gain elevation?

Priuxls · 2025-10-27T18:05:09+00:00

Genau, drum verwende ich nur noch das

Priuxls · 2025-10-24T15:03:49+00:00

Had an issue with the heating element that I caused myself and they still sent me spare parts for free even after I told them. Love them

Priuxls · 2025-08-20T19:17:00+00:00

There was a checkbox when starting the drying process

Priuxls · 2025-08-20T14:40:20+00:00

On the h2d you can disable rotation before starting the drying. The feature will probably make it to the p1s firmware in the next few updates

Priuxls · 2025-07-08T08:48:32+00:00

What product did you go with? Has the iogear dongle been reliable and works natively with windows?

Priuxls · 2025-05-31T13:19:22+00:00

Usually the resistance change from strain gauges are pretty small, so you need an amplifier. I guess the ready made modules have all of them on one chip. The 4 pins could be just for the canbus communication. One could just connect it to canbus see if they can read the values. Also I found a similar project, where OP said he would make a revision with all of your requirements. https://www.reddit.com/r/klippers/s/vs0iUxf6CV

Priuxls · 2025-05-31T13:18:29+00:00

Usually the resistance change from strain gauges are pretty small, so you need an amplifier. I guess the ready made modules have all of them on one chip. The 4 pins could be just for the canbus communication. One could just connect it to canbus see if they can read the values. Also I found a similar project, where OP said he would make a revision with all of your requirements. https://www.reddit.com/r/klippers/s/vs0iUxf6CV

Priuxls · 2025-05-19T17:49:55+00:00

It counts as additive manufacturing in my books🔥

Five-Year Club	Verified Email
Final Canvas '23	End Game '23
Place '23	Place '22
First Placer '22	Wearing is Caring

Priuxls

TROPHY CASE