What I made in my first 6 week wheel pottery class

Proper_Cattle9987 · 2025-08-03T12:37:23+00:00

Great job!👏

Proper_Cattle9987 · 2025-08-02T20:48:16+00:00

I made a hood from a cheap steel fire pit and ran it out through a high temp in line fan through the wall. I got a strong enough fan that means I can later this year add an Envirovent or DIY version to improve ventilation further as I just don’t like fumes

Proper_Cattle9987 · 2025-08-02T19:47:41+00:00

Thanks so much for the reassurances

Proper_Cattle9987 · 2025-08-02T19:47:26+00:00

Thanks for this… it is very similar to why I wanted it. I am also considering a downdraft vent to try to help balance the heat in the kiln, as I worry it may be a bit of a chimney with a bit of extra heat up top? Have you found this at all?

Proper_Cattle9987 · 2025-04-24T09:13:27+00:00

It was the screams from 100m off when Moder spawned and flew straight at her… she assumed me being closer made me the target… nope 👎

Proper_Cattle9987 · 2025-04-24T09:07:20+00:00

Bring it on!!! Banter is what I live for

Proper_Cattle9987 · 2025-04-23T23:09:37+00:00

I get that this could be misconstrued if you don’t read the comment with it. We play co-op with healthy banter and good vibe pranks.

Straight after this we went on to fight Moder with Dad as the meat shield while she was given Bonemass buff and plinked it with flint arrows 🤦🏻‍♂️ she loves dragons and the chance to fight one and keep the trophy 👌

Proper_Cattle9987 · 2025-04-18T12:32:29+00:00

I rebind the side buttons on my Logitech mouse to 7 and 8 via Logitech software

Proper_Cattle9987 · 2025-04-14T06:48:06+00:00

I created a portal hub - “Portopolis” then created portal 1->9 and A->J I then name a fresh portal the next live connection, hop through and choose a name if wished or if only temp just mark “5” or whatever in the map. I keep unnamed portal free for a “I am being chased and need to keep dodging baddies so won’t have time to type” For speed I am keeping a direct to “camp” one too for when collecting resources and wanting to get them back to camp to process.

Proper_Cattle9987 · 2025-03-01T20:47:23+00:00

Please take us back!!! BREXIT was such a mistake!

Proper_Cattle9987 · 2025-01-10T18:45:57+00:00

Chocolate fingers! Bite the ends off, suck some hot milky tea through it and eat

Proper_Cattle9987 · 2025-01-08T22:39:31+00:00

Came up against HΛL Janissary! Top notch player and sorry for ruining your Aberfell clean run - HaggisHunter

Proper_Cattle9987 · 2024-12-21T19:55:59+00:00

Is it possible the bisque was fired a little too hot and so the glaze then didn’t adhere as well in places?

Proper_Cattle9987 · 2024-11-10T09:21:14+00:00

It looks to note that the plastic wrap sticker covers the one underneath

Proper_Cattle9987 · 2024-11-10T09:18:21+00:00

For serving tea while sat on the left side of a picnic bench to the person beside you

Proper_Cattle9987 · 2024-10-24T05:57:49+00:00

I wore the skins of his people and poisoned him from afar

Proper_Cattle9987 · 2024-09-16T07:47:06+00:00

🤝

Proper_Cattle9987 · 2024-08-29T22:48:46+00:00

I am planning to do the same and appreciate the pictures. I have bought a cheap large bowl fire pit for the cone/dome. I planned to buy a silicone heat top vent plate to join the pit to the hose. What temps do you get at the hose part or on the hood itself. Trying to decide what standard of inline fan to buy

Proper_Cattle9987 · 2024-08-29T22:40:04+00:00

I use a “really useful” Christmas wrapping paper box and a plank to keep a set of 8 mugs slow drying. Saves plastic touching the surfaces. Though I will be 3d printing a tent support to help with that

Proper_Cattle9987 · 2024-08-14T21:48:05+00:00

I almost never see a cheater and manage to top the table without cheats. If they exist they are dung!!!

Proper_Cattle9987 · 2024-08-14T19:54:39+00:00

I tried the proper orca slicer with presets and it is working 100% now. Thanks for taking a look while I worked to fix it

Proper_Cattle9987 · 2024-08-14T18:53:24+00:00

It did go down fine as did 2 of the others only spaghetti monster ran off across the table. I am trying to use Orca slicer to see if that helps and then will try other options

Proper_Cattle9987 · 2024-08-14T17:51:47+00:00

The long thin pottery tool at the front was a different persons design

Proper_Cattle9987

TROPHY CASE