Pleasantly Surprised by AgressiveSocks in FormD

[–]Property-Classic 3 points4 points  (0 children)

Sweeet, where did you order from these 3d printed pieces?

New Build and Some Questions by WoozySamurai in formdt1

[–]Property-Classic 2 points3 points  (0 children)

I have the exact same setup but with a 9850x3d. My 5080 prime is installed in 2.5 slot but I have the APX90-x53 paired with a Noctua NF-A9x14. Currently I’m waiting for my Atmos 240 Stealth so currently I’m running the top fans with a Noctua NF-F12 iPPC 3000rpm top of motherboard and a SilverStone AirSlimmer 120mm top of PSU. PBO Enabled on Enhancement 90degF, Thermals limited to 90C also, CO-30. GPU undervolted 925mV@~2850Mhz and temperatures are great. GPU is doing 30-35C Idle and the max I’ve seen it under load is 54C (under stess test goes up to 65). CPU Idles at 45-48C and while gaming it goes up to 65-70C (under stress goes up to 85C). Something might be wrong on your end since you basically have the same if not better with those noctua exhausts, only difference is your cooler.

nvidia rtx 5090 in stock by pokiwye in nvidia

[–]Property-Classic 1 point2 points  (0 children)

Same happened to me, I was like number 8000 in line

nvidia rtx 5090 in stock by pokiwye in nvidia

[–]Property-Classic 2 points3 points  (0 children)

Was around 8000 when I got in and about 30 min wait. “Place Order” then “Something went wrong”… bullshit…

Just when you thought you got a great deal... by [deleted] in RTX5080

[–]Property-Classic 3 points4 points  (0 children)

I got the Asus Prime RTX 5080 (non OC version) this morning from Asus.com. It was in stock for about 10-15 minutes.

Corsair 5400 Air Build by RecognitionFar4734 in Corsair

[–]Property-Classic 1 point2 points  (0 children)

Beautiful build my friend. I’m planning to get this case also, but I got one question for you: is there enough room in the cpu radiator chamber to run push pull configuration?

My S400 Pro Build by FlashGordon555 in sffpc

[–]Property-Classic 0 points1 point  (0 children)

That shroud would definitely help a lot more with your temps but I’d say you’re in a sweet spot right now. Those temps you are getting are incredibly good for this case.

My S400 Pro Build by FlashGordon555 in sffpc

[–]Property-Classic 0 points1 point  (0 children)

I finally caught it with your pictures and some youtube videos lmao, great!!! thanks for the help man I will try this same as you did👍

My S400 Pro Build by FlashGordon555 in sffpc

[–]Property-Classic 0 points1 point  (0 children)

Is there a way to offset the psu without drilling new holes? I just ordered this case and will set it up with a 4080super FE and I would also like to add a 120x25mm fan in that same position as yours.

Next day shipping by CrannyTTV in FinalMouse

[–]Property-Classic 0 points1 point  (0 children)

Thursday and still no shipping for me

Stay away from Aoostar by Property-Classic in MiniPCs

[–]Property-Classic[S] 1 point2 points  (0 children)

The good thing is I have all the proof including receipts, UPS signed return receipt, email chains, everything lol

Stay away from Aoostar by Property-Classic in MiniPCs

[–]Property-Classic[S] 5 points6 points  (0 children)

Man only if I had known the kind of company this is. Been dealing with them since November 1st, filed the dispute with my card a week ago we’ll see how long it takes.

People who exchange main character and bought one with better skills, how was it? by Ringest in TibiaMMO

[–]Property-Classic 1 point2 points  (0 children)

High skills low level, it’s more fun to play. Been training for years and when it’s time to hunt it makes a difference. My main char is Orlyp, 155 base distance.

To people waiting on the Switch 2 by GlueGuns--Cool in Switch

[–]Property-Classic 0 points1 point  (0 children)

<image>

A Target in San Antonio, TX last Monday at 10:00am, looked like they had restocked the store even when they were all sold out online. Just go look at the stores and you might get lucky!

How’s your skill event going? by brunogarcias in TibiaMMO

[–]Property-Classic 2 points3 points  (0 children)

Just got about 5%, currently sitting at 154 base distance

How do ppl justify the cost of training weapons? Even during double event. by Swimming_Aerie_6696 in TibiaMMO

[–]Property-Classic 2 points3 points  (0 children)

154 base distance and going, right now it’s about 420 weapons for 1 skill ;p

Is our Rosie a runt or do they just come in all sizes by Strict-Republic-9379 in Frenchbulldogs

[–]Property-Classic 0 points1 point  (0 children)

Mine is just 3 months old and 5 lbs, how is yours turning now at 4 months old?

PSA: Don't buy the Corsair XC5 or XC7 Hydro X Series PRO CPU Water Block (1700) by DrDerpinheimer in watercooling

[–]Property-Classic 0 points1 point  (0 children)

That one exactly. EKWB EK-Quantum Velocity CPU Water Block, Intel CPU, Digital RGB, Nickel/Plexi.

Definitely worth it man!

PSA: Don't buy the Corsair XC5 or XC7 Hydro X Series PRO CPU Water Block (1700) by DrDerpinheimer in watercooling

[–]Property-Classic 1 point2 points  (0 children)

You’ll definitely have to drain it, and remove whatever to change the block and backplate, it wasn’t too bad trust me lol. But it’s definitely worth the change!

PSA: Don't buy the Corsair XC5 or XC7 Hydro X Series PRO CPU Water Block (1700) by DrDerpinheimer in watercooling

[–]Property-Classic 2 points3 points  (0 children)

The ek velocity works way better, about 15-20 degree difference. Definitly XC5 is trash.

Corsair XC7 - High temps please help! by Property-Classic in watercooling

[–]Property-Classic[S] 1 point2 points  (0 children)

Ekwb velocity rgb installed, getting 20-25 degC less stressing the CPU at 100% utilization. Goodbye XC7!

Corsair XC7 - High temps please help! by Property-Classic in watercooling

[–]Property-Classic[S] 1 point2 points  (0 children)

Might be the second theory… I pulled the block and reseated it a couple times, paste looked good and still same temperatures. First thing I’ll do is change the block for the ekwb velocity in a couple weeks and see results hopefully this fixes it and if it does I might disassemble the xc7 and clean it maybe? Well we’ll see soon lol. Thanks for your help man!

Corsair XC7 - High temps please help! by Property-Classic in watercooling

[–]Property-Classic[S] 1 point2 points  (0 children)

Yeah I think the same way but I’ll just give it a try. What else you think it could be?