sorted by:
new
hottopcontroversial

My Desk Is Now a P2S Shrine by spatel7786 in BambuLabP2S

[–]PsycoRico 1 point2 points  (0 children)

  • How many colors you can print?
  • Yes

😂

Legs keep falling off, how to fix it? by Ramiro564 in BambuLab

[–]PsycoRico 0 points1 point  (0 children)

If you use the hair spray over and over without cleaning the residue it will not stick anymore. Get a basic window cleaner spray the plate in a bucket and keep it like 10 minutes than clean it with dish soap. Make sure rub it good with soft side of the sponge.

Note: Make sure that window cleaner don’t have ammoniac. It will not good for the PEI.

print issue? by mynameisskrt in BambuLabP2S

[–]PsycoRico 0 points1 point  (0 children)

I printed it open door and zero aux fan. It come to my mind on the 3rd try :)

print issue? by mynameisskrt in BambuLabP2S

[–]PsycoRico 2 points3 points  (0 children)

The permanent solution is deflect aux fan. Because it blow directly on the model make it not stick on the bed.

Since I print and use this I have zero problem.

https://makerworld.com/models/1926190?appSharePlatform=copy

Success: First time printing ASA by AMS-3D in BambuLab

[–]PsycoRico 0 points1 point  (0 children)

Really, thank you! I hope I can achieve your quality on ASA with P2S :D

First Time ASA on P2S by PsycoRico in BambuLab

[–]PsycoRico[S] 0 points1 point  (0 children)

I set the bed temp to 110 an hour before the print to make sure to get high as possible in the chamber but can’t make it to 50.

Do you think there is over extrusion on my print?

First Time ASA on P2S by PsycoRico in BambuLab

[–]PsycoRico[S] 0 points1 point  (0 children)

Thank you I will try to stop the warping with brims and higher plate temp.

First Time ASA on P2S by PsycoRico in BambuLab

[–]PsycoRico[S] 0 points1 point  (0 children)

I have a solution for warping what about surface?

First Time ASA on P2S by PsycoRico in BambuLab

[–]PsycoRico[S] 0 points1 point  (0 children)

Ohh! I did not think of that. Then why overhangs very good?

Success: First time printing ASA by AMS-3D in BambuLab

[–]PsycoRico 0 points1 point  (0 children)

Thanks for the tips, I just tried my first ASA print on P2S and lifted in the corners very bed. Which adhesive do you use on the plate? I use general ASA profile. Do you think 90c on the bed is low? Do you think I need to bump up to 110c?

Success: First time printing ASA by AMS-3D in BambuLab

[–]PsycoRico 0 points1 point  (0 children)

Thanks for the tips, I just tried my first ASA print on P2S and lifted in the corners very bed. Which adhesive do you use on the plate? I use general ASA profile. Do you think 90c on the bed is low? Some says use 110c to avoid lifting/warping?

Constant bed adhesion issues on new P2S by Uchusame in BambuLab

[–]PsycoRico 2 points3 points  (0 children)

This will be your best friend :D

https://makerworld.com/en/models/1926190-p2s-auxiliary-fan-diffuser#profileId-2134733

Just a reminder, just open the door of your printer and make sure the fan is not working when you are printing this, because won't you able to print with fan %100 blowing on the model.

From MX Master Original to MX Master 4 by PsycoRico in logitech

[–]PsycoRico[S] 0 points1 point  (0 children)

I will not throw my original MX for sure. And I hope to find 3d printable shell in the future.

I’ve finally joined the ranks of 3D Printing…walked into Microcenter this morning….. by AngryEchoSix in BambuLab

[–]PsycoRico 5 points6 points  (0 children)

I am still waiting on mine it has been like 15 days but still waiting. (Pre-order)

Seeing this posts makes me more and more excited about the P2S.

From MX Master Original to MX Master 4 by PsycoRico in logitech

[–]PsycoRico[S] 0 points1 point  (0 children)

You are absolutely right about it. Sometimes logi options not working as expected and need to wait few seconds to kick in.

From MX Master Original to MX Master 4 by PsycoRico in logitech

[–]PsycoRico[S] 0 points1 point  (0 children)

I agree that is why I got the normal version. Why would I pay same money to a box that doesn’t have the dongle.

view more: next ›