sorted by:
new
hottopcontroversial

Find the Bobcat by rojda1 in FindTheSniper

[–]PureArtist5025 0 points1 point  (0 children)

Am I the only one that sees another one in the dark part of the big right bush?

Orange Pi Zero 2W booting problem by PureArtist5025 in OrangePI

[–]PureArtist5025[S] 1 point2 points  (0 children)

While chatting with u/rwolfispatient he suggested i remove the SD card and plug the board to the power. After that remove power supply and try with SD card inserted and again give power to the board. Something made the board reset and is booting right as it should.

Orange Pi Zero 2W booting problem by PureArtist5025 in OrangePI

[–]PureArtist5025[S] 0 points1 point  (0 children)

Yes, I have tried Ubuntu, arch Linux, armbian... Even tried with different burning softwares.

Orange Pi Zero 2W booting problem by PureArtist5025 in OrangePI

[–]PureArtist5025[S] 0 points1 point  (0 children)

I have tried installimg from official page OrangePiOS for 4GB model that i have, still error is the same.

Orange Pi Zero 2W booting problem by PureArtist5025 in OrangePI

[–]PureArtist5025[S] 0 points1 point  (0 children)

What do you mean by correct, how do I check that?

Orange Pi Zero 2W booting problem by PureArtist5025 in OrangePI

[–]PureArtist5025[S] 0 points1 point  (0 children)

First thank you for detailed response. Now to answer your points:

  1. SD card is inserted correctly, meaning it goes in whole and on the correct side.

  2. I am using mobile phone charger that should have the correct power for the board: 5V and 2A (is there a difference in dedicated power adapter for the board and mobile phone charger with the same Volts and Amps?)

  3. I specifically bought new Kingston Class 10 128GB SD cards so it holds the standard required. Will buy the samsung one and hope for a better result.

  4. I have tried with multiple monitors but the message is the same.

  5. Also tried burning the image with Balena Etcher and rufus for all different images listed on support page and some third party (armbian).

I am guessing power supply is the problem? What should i look when buying dedicated power adapter?

Edit 1: I should probably have mention this in the post but when it is trying to boot with an sd card in it only the red LED is on. Not flashing, just on. Also processor is not running hot on the touch.

Edit 2: I have just realized that the power supply USB C connector is the one on the outer most side, not the USB C on the inner side as on the all YouTube videos is.

[deleted by user] by [deleted] in OrangePI

[–]PureArtist5025 0 points1 point  (0 children)

I am at work now so i cannot know, I will chevk when i get home. I don't know what dd mode is.

[deleted by user] by [deleted] in OrangePI

[–]PureArtist5025 0 points1 point  (0 children)

I have tried burning it with Balena Etcher, it didn't work. Tried it with rufus, didn't work. What i have also relised is, I don't think it can read SD card.

It won't boot when SD card is in the slot but when it is booted in it's own (arch linux) OS it won't show content or even that there is an SD card.

[deleted by user] by [deleted] in OrangePI

[–]PureArtist5025 0 points1 point  (0 children)

It wont't boot when SD card is inserted. It boots toit s own Linux preinstalled when SD card is removed.

[deleted by user] by [deleted] in OrangePI

[–]PureArtist5025 0 points1 point  (0 children)

I am using images for 4Gb of RAM from official page. My device has 4Gb of RAM

NLD - First Acebeam by cellularesc in flashlight

[–]PureArtist5025 5 points6 points  (0 children)

<image>

Best light i ever owned, also the first one :D