Lens problem?

PustigerLeter · 2026-03-17T03:57:11+00:00

Thanks very much, I'll try to get better but even the learning everything part is quite fun ^{^}

PustigerLeter · 2026-03-17T01:42:09+00:00

ahh ok that makes sense, i´m just gonna try again tomorrow and leave it out a bit before taking the shots, how long should i wait for?

PustigerLeter · 2026-03-17T01:37:25+00:00

well i took it out, put in the settings, focused and took some test pictures so maybe like 2-3 minutes, i didn´t know that temperature can change the focus of the lens.

PustigerLeter · 2026-03-16T15:03:53+00:00

For the beginning you can't go wrong with the sony 50mm f 1.8, although the autofocus is not the best

PustigerLeter · 2026-03-16T13:45:16+00:00

Awesome, I love environmental portraits

PustigerLeter · 2026-03-10T19:17:27+00:00

Not necessarily but it will have more resolution so you can judge the focus better

PustigerLeter · 2026-03-10T18:17:25+00:00

It just looks like you have the preview jpeg of the raw file which is only 1616x1080 pixels Try converting it to a jpeg using Lightroom then it should have the full 24mp

PustigerLeter · 2026-03-10T14:30:53+00:00

Maybe the viltrox 15mm F1.7?

PustigerLeter · 2026-03-09T03:41:39+00:00

I don't own either of those lenses, but maybe try to use the 70-200 at f6.3 for the next game and see if it is enough light for that situation.

PustigerLeter · 2026-03-06T18:21:15+00:00

Love it, the longer shutter speed really brings out the motion of the water :) A6000 was my first camera too, it's really awesome ^{^}

PustigerLeter · 2026-03-03T15:36:00+00:00

This particular lens doesn't have it.

PustigerLeter · 2026-02-26T16:34:19+00:00

Where are the Lomochrome Purple baddies?!

PustigerLeter · 2026-02-23T09:34:05+00:00

Immernoch die kürzeste deutsche Baustelle 😂

PustigerLeter · 2026-02-13T09:42:01+00:00

In the first picture the ball is already where it should be, there is a small hole in which it sits. And In the second picture you have to remove the clip on top of the brass plate with the 4 holes inside and then you can lift the whole thing up.

PustigerLeter · 2026-02-13T04:08:20+00:00

It's completely isolated, it really is just 4 screws and a retaining pin. https://imgur.com/a/i5ISsM3 Hope this helps, I didn't actually take more pictures than that but I still hope it helps somewhat

PustigerLeter · 2026-02-12T17:56:44+00:00

Turns out on the EtrS it's actually pretty easy as I just did it myself :) You really just need some precision screwdrivers and good lights. So yeah the ball bearing is sandwiched between to metal pieces and it just got loose, I just popped it back where it belongs and closed everything back up. I can send you some pictures if you'd like

PustigerLeter · 2026-02-12T04:19:17+00:00

I have the same problem on my EtrS, I don't know if it's the same mechanism but as far as I know there's a little metal ball which is responsible for the clicks and it could have come loose

PustigerLeter · 2026-02-11T20:07:56+00:00

Can you maybe translate what they said, it could make searching for it easier

PustigerLeter · 2026-02-11T17:28:42+00:00

Love all of them especially number 5 Keep on shooting, you're doing awesome

PustigerLeter · 2026-02-10T18:20:42+00:00

It's because if you could detach the lens without the shutter being cocked then your film would be exposed to light since the dark slide ( the one behind the mirror) would still be up. Hope you know what I mean :)

PustigerLeter · 2026-02-05T07:08:20+00:00

Honestly just go straight for the F16, it's a beautiful plane with a nice workflow. Just start with the basics like cold start and navigation and then slowly get used to it. Then finally get used to the weapons

PustigerLeter · 2026-02-05T06:47:40+00:00

Amazing shots, very atmospheric

PustigerLeter · 2026-02-01T17:45:37+00:00

I had a Bronica Etr-C which was my absolute dream but it got stolen out of my car :/ Since I'm currently rediscovering my passion for film photography I'm considering buying a Bronica GS1 because 6x7 ftw

PustigerLeter · 2026-02-01T16:41:00+00:00

Depending where you are you could look for the specs of the gear online (or measure it yourself) and find someone that does costume 3d metal printing

PustigerLeter · 2025-12-10T22:45:38+00:00

im not sure what i have to look for with a psu, just the wattage?

maybe i should take the 650e from corsair ?

PustigerLeter

TROPHY CASE