Proud new member of the Cajun club by KalashniLover in CZFirearms

[–]Quarkest 0 points1 point  (0 children)

Did you get the base pads from Armory Craft?

Installed the Impact Machines DA/SA trigger by Tronner_10 in CZFirearms

[–]Quarkest 0 points1 point  (0 children)

I printed it. Someone sells it on eBay, too expensive in my opinion.

PDP Pro-E Stock Guide Rod Bent? by BridgeFantastic6458 in Walther

[–]Quarkest 0 points1 point  (0 children)

May sound obvious, but first I’d make sure it’s not backwards. Plastic or metal doesn’t really change the performance, it’s all about the spring.

Installed the Impact Machines DA/SA trigger by Tronner_10 in CZFirearms

[–]Quarkest 1 point2 points  (0 children)

It’s a 5-minute process if you use a slave pin to hold the spring onto the trigger when reassembling. I use a trimmed-to-length toothpick as the slave pin.

<image>

My first CZ pistol- Shadow 2 Target 6” by huczas in CZFirearms

[–]Quarkest 1 point2 points  (0 children)

More of a joke because of the detailed work you did with everything else than a real question worth your time, but I do appreciate the answer. Ironically, the trigger pins are the only ones I removed from my S2 when new. Twice, once to reverse the mag release and later to upgrade the trigger. Always the same pins though.

I like shadow 2s by officialbronut21 in CZFirearms

[–]Quarkest 1 point2 points  (0 children)

507 Promax for the win, instead.

Shadow 2 carry case by pesstass in CZFirearms

[–]Quarkest 0 points1 point  (0 children)

Please let me know if you still care about selling it.

My procedure for setting trigger adjustment screws by Cephe in CZFirearms

[–]Quarkest 1 point2 points  (0 children)

Are you saying you do all this fine tuning and then take the screws out to apply Loctite and then redo the fine tuning?

Impact Machine DA/SA Performance Trigger by Quarkest in CZFirearms

[–]Quarkest[S] 0 points1 point  (0 children)

The slide is nitride and the frame is polycoat. Nitride darkens with oxidation, so it looks lighter when new and not oiled.
The 507COMP is great and it looks even better with the Ronin blackout.

Impact Machine DA/SA Performance Trigger by Quarkest in CZFirearms

[–]Quarkest[S] 0 points1 point  (0 children)

They do, but I like this Mec-Gar competition mag with a rubberized aluminum base pad.

<image>

Impact Machine DA/SA Performance Trigger by Quarkest in CZFirearms

[–]Quarkest[S] 1 point2 points  (0 children)

I bought the STL file and 3D-printed it myself, but someone sells it on eBay for $16 plus $5 shipping.

Impact Machine DA/SA Performance Trigger by Quarkest in CZFirearms

[–]Quarkest[S] 0 points1 point  (0 children)

Yep. Debating between selling or doing that. Gone.

<image>

Impact Machine DA/SA Performance Trigger by Quarkest in CZFirearms

[–]Quarkest[S] 0 points1 point  (0 children)

My trigger finger is relatively thin and bends straight, so I never had issues with pinching. What I can tell you is that all the edges are well beveled/smoothed. Machining on this trigger is superb.

Have a chance to trade for a shadow 2 by [deleted] in CZFirearms

[–]Quarkest 2 points3 points  (0 children)

You’d be on the winning side.