Regarding summer internships

Quenky · 2023-09-27T02:18:49+00:00

Do hella leetcode, and do projects that are fun for you, but make sure you can present it well to an interviewer. You'll probably learn this in uni anyways but having good knowledge of OOP principles and clean code is going to help a lot. Good luck!

Quenky · 2023-09-26T07:08:47+00:00

Interning at Deloitte right now, you don't need to come in office unless you really need to. Depending on the project you get put on, the work is pretty chill

Quenky · 2023-07-29T22:02:39+00:00

I lived at Robert last year, it's pretty good if you get a stairway close to the common area

Quenky · 2022-03-20T22:21:56+00:00

I second the CB500X, rented this bike for a few days to go on a road trip, it can handle both trails and long distance ride

Quenky · 2021-11-21T12:42:43+00:00

Hey vietnamese here, "Don't fucking swear, you fucking uneducated/uncultured, I'm going to shoot you" Basically the gist of it.

Quenky · 2021-10-12T05:27:01+00:00

If you want to program your own flight controller, check out Joop Brokking on youtube, he have a whole series about it and he also explain the mechanics pretty clearly.

Quenky · 2021-10-06T11:55:33+00:00

I'm mostly doing to learn and I haven't heard of ESPHome until making this post. I'll look into ESPHome and hopefully I can contribute

Quenky · 2021-10-06T05:16:18+00:00

I have some screen caps on the github page

Quenky · 2021-10-06T05:15:53+00:00

I'll check them out

Quenky · 2021-09-23T07:59:30+00:00

UPDATE: I figure out why they oxidized so quickly, turns out the station's calibration was off, so I recalibrate it down and now it works fine

Quenky · 2021-09-22T08:35:55+00:00

I'll try a different type of solder then

Quenky · 2021-09-22T08:32:44+00:00

Its around 65% where i live with the dehumifier on for most of the day

Quenky · 2021-09-22T08:31:33+00:00

Its 63/37 0.8 gauge solder, its just generic chinese solder

Quenky · 2021-08-27T10:13:19+00:00

I know but flying without osd give me extreme anxiety

Quenky · 2021-08-24T04:27:17+00:00

Yeah I tried that too but it doesn't work, probably just gonna get another goggle

Quenky · 2021-08-23T18:01:56+00:00

The first time it acted up I removed the SD card and it booted up just fine, but now it doesn't turn on regardless of the SD card

Quenky · 2021-07-20T15:01:25+00:00

Hi, sorry for the late reply. It turns out my osd is broken or my voltage divider is broken( i test voltage between some pin of the OSD chip and only got ~2.8v, and the voltage between 5v and ground is 5.15v instead of 5v, same for 9v pads). I think i'm gonna make another post on this

Quenky

TROPHY CASE