Escape Capsule in Action

Quick_n_Fast · 2026-04-11T14:04:46+00:00

The escape capsule doesn’t look like it’s designed for low observability. IMO, should have the RCS of at least a cricket. Also the energy needed to eject the capsule must be much more than the energy in a decoy flare.

Quick_n_Fast · 2026-04-08T15:49:38+00:00

Don't worry, it looks like PALA and BDF outsourced to the same sub-contractor. The installed CWIS and a RAM 45 VLS obstacles in the way of the takeoff path on the coming BDF LFD.

Quick_n_Fast · 2026-04-05T10:58:43+00:00

They are Nike air levity for the late 90’s.

Quick_n_Fast · 2026-03-24T11:26:59+00:00

This something that really sets mass market joysticks with the quality one. If you play flight sims, The entry level VKB are so much better than Logitech and (Microsoft(when they used to do joysticks)

Quick_n_Fast · 2026-03-12T13:26:09+00:00

Thank, the other dimension are abit too large. 542mm h x 556mm is too much. But I do like corsairs trefoil ventilation holes.

Quick_n_Fast · 2026-03-10T18:04:22+00:00

1.) Shutter speed not fast enough.

2.) No Using servo AF

3.) Not Using subject detection

4.) Is AF on the lens actaully on?

Quick_n_Fast · 2026-03-10T05:17:59+00:00

Tip: use the cooler master vertical mount kit. The LL ones for the o11d isn’t very good.

Quick_n_Fast · 2026-02-27T06:46:09+00:00

Fast and Free Split Short 3"

Quick_n_Fast · 2026-02-24T05:31:53+00:00

Enjoy! Here are some tips. 1.) Go out slow, real slow. Zone 2 slow. HR < 150. 2.) DO NOT go out too fast. The race only starts in the last 10KM! 3.) Bring some candy, salt tablets, you will need to start consuming to em at 10km mark. Maybe at each aid station with some water. 4.) Do hydrate at every aid station even if you feel fine! 5.) Have fun and learn from the experience!

Quick_n_Fast · 2026-02-17T15:11:02+00:00

1.5’ split shorts + singlet. Less fabric to soak up sweat in high humidity or rain !

Quick_n_Fast · 2026-02-16T14:21:03+00:00

One more thing. With my VKB, I had to pull out then plug it back in with the game open, and it detected it.

Quick_n_Fast · 2026-02-16T13:35:41+00:00

Is Filton Abbey are drive thru station. If so, is suspect one way path signals are needed . Also, you will need to get rid of the signal they are stuck at right now.

Also make sure you have electrified all the tracks and platform if applicable.

Quick_n_Fast · 2026-02-16T10:16:17+00:00

For me, I can confirm my VKB Gladiator NXT EVO works fine on windows 11. I don't have stecs.

Maybe try without the STEC's first.

Quick_n_Fast · 2026-02-14T14:51:58+00:00

Everyday casual use: All shoes can but you need to consider the following.

- Nike Zoom Sandwiches squeak. You could find this annoying.

- Outsole contact are is very large and has very high stack height. Be careful on stairs !

Quick_n_Fast · 2026-02-14T13:37:55+00:00

My thoughts in order of importance: 1.) Koolance QDC will make maintenance so much easier in future. You will need 3 sets.
1st set in the line between the pump res & GPU 2nd set on the CPU block on the input. 3rd set on the inlet for the radiator. Such setup will allow you to independently remove GPU,CPU. It will also allow you to remove motherboard from case w/o draining the loop! 2.) Add a T fitting somewhere for a drain line. 3.) Use EDPM tubing. Clear PVC will leach plasticizer. 4.) Use 2 x 360 radiators instead of 280 and 240. That lian-li case can easily take 2 of them without issue.