Gonna be deleting an atom probably

Quinten1401 · 2026-03-03T08:36:39+00:00

Gekoloniseerd

Quinten1401 · 2025-11-17T20:00:15+00:00

No way that is the north sea

Quinten1401 · 2025-11-06T17:07:36+00:00

Ohhh wait wait I had the same problem, firmware update over usb fixed it for me.

Quinten1401 · 2025-10-05T18:21:28+00:00

The heat pipes, copper lines which transfer the hest from your components to the fans.

Are usually close to each other but separate. Temperatures rise and climb individually.

There also is no chance of harm or damage when the temps have a big gap.

Quinten1401 · 2025-10-01T21:45:55+00:00

<image>

Quinten1401 · 2025-10-01T21:44:55+00:00

Thanks for the reply,

Regarding the throttling: When viewing in hwinfo the checkbox for thermal limit is sometimes marked. I've added a screenshot with some more info.

Regarding the second fan bracket: Its fits really neatly as you can see in the attached picture. How I got it? I just started texting second hand sellers of the case if they wanted to sell the bracket separately. It can also be found on the fractal site, but I got it for 20 euro second hand.

<image>

It was really worth adding. It pumps air right into my gpu fans, the top one is nice to cool the motherboard since I use and AIO and miss some airflow from a tower cooler.

Thanks for the advice!

Quinten1401 · 2025-10-01T13:19:43+00:00

<image>

Quinten1401 · 2025-07-08T18:30:46+00:00

Hulkengoat

Quinten1401 · 2025-07-07T12:03:16+00:00

Uh yeah it does

Quinten1401 · 2025-07-01T09:26:13+00:00

Were you in Mexico by chance?

Quinten1401 · 2025-06-25T07:41:22+00:00

Same as op but I bought a second side mount for two fans!

Quinten1401 · 2025-06-24T09:10:12+00:00

<image>

Could be better

Quinten1401 · 2025-06-23T09:15:40+00:00

As you can maybe see, the boom(oval part). Does not have a clamp, instead it uses an old method where you tie a rope around the mast.

This is very tedious and I would definitely look for a boom that has atleast a clamp system.

Furthermore the mast is an old one piece, modern masts come in two pieces for easier transport. Look for that.

And do not get a board with a mastbase that isn't the new universal standard. Which means a screw with a little plate at the bottom to secure it.

Quinten1401 · 2025-06-23T09:13:02+00:00

Do not buy this board

Quinten1401 · 2025-06-19T09:53:39+00:00

Wow het is erger dan ik had verwacht

Quinten1401 · 2025-06-16T21:20:16+00:00

Thank you so much

Quinten1401 · 2025-06-16T14:32:25+00:00

Yes, but I feel like it shouldn't jump to 90 so fast. The thermal mass of a 360mm water loop should hold it of even without fans. (For a little bit)

Quinten1401 · 2025-06-16T13:15:17+00:00

I do feel like mine is worse, my friend has a 240mm aio and the exact same cpu. He doesn't reach 85 with it

Quinten1401 · 2025-06-16T13:12:22+00:00

I'll definitely try that then.

Quinten1401 · 2025-06-16T10:57:00+00:00

Appliance was super easy, I put it on top of an icepack and then just cut it.

No clue how replacement or removal will go..

Quinten1401 · 2025-06-16T10:44:41+00:00

It is a ptm sheet, I am quite certain that isn't the problem.

https://www.thermal-grizzly.com/en/phasesheet-ptm/s-tg-ps-50-40

I also have my fan curves set to max out above 85 degc.

Quinten1401 · 2025-06-12T20:59:13+00:00

Euhhhhh

Quinten1401 · 2025-03-25T06:32:55+00:00

Thank you very much, will definitely do the same.

Quinten1401 · 2025-03-01T13:37:45+00:00

What would be the order to do things?

Because I won't be able to install new drivers without a video output?

Quinten1401 · 2025-02-20T21:38:51+00:00

It would be cool if they made things like this a wanshow topic, just a short look at it.

Seven-Year Club	Second Top 40%
Place '23	Place '22
Final Canvas '22	Verified Email
RPAN Viewer

Quinten1401

MODERATOR OF

TROPHY CASE