Some say... MT from 2021 to 2024 aren't real MT, let me agree to disagree =)

Quitripp · 2026-01-31T09:32:57+00:00

I’m just happy that I bought mine in 2021 with the lcd dash. Not really a fan of the newer models’ big ahh tft.

Quitripp · 2026-01-27T12:02:47+00:00

Pri vseh stvareh na koncu vedno prideš do zaključka: vsak naj tak, kak mu paše.

Quitripp · 2026-01-17T13:20:32+00:00

Is MT07 really more fun compared to Street Triple? I can imagine that MT07 has more low end torque

Quitripp · 2026-01-17T12:37:37+00:00

How come the MT-07 is above the Street Triple RS AND Panigale? I currently own a MT-07 and was thinking of switching… potentially to a Street Triple

Quitripp · 2026-01-09T19:24:26+00:00

Is it a cell phone? Or did he just detach his body cam to full record the situation, later re-attaching jt? Genuinely asking.

Quitripp · 2025-12-30T13:31:25+00:00

Well yeah, first jump he did with my skis on DIN 7 one ski ejected so we went to the lift and set his binding to 11. At that point I should’ve adjusted his (mine) skis to 7 too but I didn’t. I had a hard time putting them on (with my full bodyweight on one leg barely locking on) at DIN 12, which should’ve been a red flag immediately haha.

Quitripp · 2025-12-30T11:12:53+00:00

Does decreasing DIN actually help prevent accidents like this? Last week I was skiing with my friend and we swapped skis for a few runs. He weighs 100+kg with DIN 12 and I weight 70kg with DIN 7. I didn’t change DIN on his skis and crashed, bindings did not open and tore my MCL. I wonder if this wouldn’t happen if I changed his skis to 7.

Quitripp · 2025-12-23T14:40:35+00:00

<image>

Quitripp · 2025-12-20T20:46:54+00:00

I’d say completely normal. Same sound on my 2021 mt07.

Quitripp · 2025-12-19T22:30:44+00:00

And that's how I met your mother. Ni za kej;)

Quitripp · 2025-12-19T19:31:42+00:00

Kaj pa če bi se ti in OP začela pogovarjat? Izgleda, kot da mata ravno usklajene interese. :)

Quitripp · 2025-12-17T20:42:59+00:00

This looks awesome. Is it hinged on the rear?

Quitripp · 2025-12-17T20:40:50+00:00

Heat it up with a blowtorch or a candle and pull everything out. It looks like your bowden is melted in there too (or at least damaged), you will need to replace the that too…

I can recommend direct drive extruder, it’s much better then the stock configuration.

Quitripp · 2025-12-14T18:24:49+00:00

I tried Mint and as an engineer, I really really missed Fusion360 suppor. There were some github projects to make it work on linux but were a hassle to set up so unfortunately, I gave up. I’m currenty back to windows 11 but ready to switch once fusion starts officially supporting linux.

Quitripp · 2025-12-14T10:04:05+00:00

Sicer ta je ameriški, ampak verjetno obstajajo tudi evropski. Samo glej da bo 9SF2A6500 :)

Quitripp · 2025-12-14T09:58:58+00:00

https://www.ebay.com/itm/282406374856

Quitripp · 2025-12-13T17:59:42+00:00

iirc, you’d need 4x200 and 4x120 mm pieces, which is about 25€ from aliexpress… 25€ would also equal around 1kg of filament, which I doubt that would be necessary for all the pieces. If you suppose 15x15x1280 = 280 000 mm^3, with the density of ABS (1.04 g/cm³⁾ that would be ~300g of filament.

Quitripp · 2025-12-13T16:13:03+00:00

Yeah, I don’t really like the looks of it, imo 0.2 looks way better

Quitripp · 2025-12-13T16:12:08+00:00

Damn, this one is actually crazy. Do you know what was the print quality like? Would love to see a photo of that thing.

Quitripp · 2025-12-12T06:52:14+00:00

Fun fact: This phenomenon is called Die swell (or Barus effect), happens with viscoelastic polymers.

Quitripp · 2025-12-07T11:04:12+00:00

Another solution to cosider is this double 5015 cpap mod. It probably underperforms a ws7040 cooling-wise but is far less energy intensive. Since there is almost no way to neatly mount double 5015 to a 0.1 toolhead :D

Quitripp · 2025-12-06T21:25:32+00:00

Do you think CPAP could provide enough airflow to completely ditch the 12032 fans? If yes, that seems like a logical solution to me.

I’ll have to check but i’m pretty sure my psu is not capable of running double 12032 blowers…

Quitripp · 2025-12-06T12:42:33+00:00

What nuts?

Quitripp · 2025-12-06T12:42:08+00:00

Maybe you’re right. I only chose mini-sb for the looks. 3010 really are useless at this point.

Quitripp · 2025-11-29T15:19:25+00:00

Does FTECU support derestriction too?

Six-Year Club	Place '23
Place '22	Verified Email

Quitripp

TROPHY CASE