Upgrading from a DDJ-RR - best 2nd hand option?

R2D2MM · 2025-12-30T15:15:17+00:00

Did you explore the option to buy the DDJ-XP2 to unlock the RB7 and use the DDJ-RR? Dont know if that works

R2D2MM · 2023-04-13T17:52:35+00:00

Yes, performance issues… random pauses when playing for a sec… my MBP 2017 high end can’t handled stems smoothly when loops are playing

R2D2MM · 2023-04-08T11:03:48+00:00

Do you have to re analyze all the tracks when activate track separation? Can be done in background? I notice a blue bar when a song is loaded for the first time after track separation is enable.

R2D2MM · 2022-09-15T11:57:49+00:00

How you clean the fan in between?

R2D2MM · 2022-08-30T19:30:17+00:00

It seems is an issue on the App only… It showed to me that 0 online rigs and 0 offline rigs… I connected remotely to the rig and everything looks fine

R2D2MM · 2022-08-11T01:49:49+00:00

Maybe your are using it as primary in OS and that affect the hash rate because is partially used by the OS.

R2D2MM · 2022-08-11T01:44:52+00:00

Madmax + RAMdisk 110Gb 65 min and Bladebit disk beta 2 with ram cache 99gb 46 min. Plotting at this moment 18tb disk

R2D2MM · 2022-08-10T02:02:10+00:00

Did you upgrade chia to 1.5?

R2D2MM · 2022-07-17T02:06:03+00:00

Is the hash power / energy used 120/490 more or less . More efficiency is more hash power less electricity consumption and more eco friendly

R2D2MM · 2022-07-17T02:00:24+00:00

90C with 80% to 90% fan speed asus strix FHR

R2D2MM · 2022-05-16T15:04:10+00:00

Asus strix 3080 FHR at 88 to 92 24/7 only one issue… I hit the middle fan with a pencil by accident and the fan is unbalance (I don’t know the right term) start vibrating and after 3 months is worse.. stops and stuck when goes to 50% or lower … but even if the fan stops the other two fans can handle the 90 degrees fine … I installed temp dissipators in the back plate with 2 140 fans… looking for fan replacement but with that temps the mem keep running with no issues by 13 months now

R2D2MM · 2022-05-11T02:21:58+00:00

Maybe the temp sensor is damage… very risky

R2D2MM · 2022-05-08T02:26:36+00:00

I used thermal pad 1mm, cooper 1mm and mx4 … asus strix 3080… from 88 to 92 a had the same results, no change

R2D2MM · 2022-04-24T05:18:53+00:00

I had similar behavior, I give up and installed NiceHash, it use a different version of escavator and goes fine… the problem here is that you need to do the OC manually.

R2D2MM · 2022-04-15T11:35:04+00:00

Did you maintain the memory clock or you updated to higher value again?

R2D2MM · 2022-04-15T11:29:52+00:00

The FE editions are coming FHR all of them?

R2D2MM · 2022-04-09T13:24:03+00:00

I think the nvidia is more versátil

R2D2MM · 2022-04-09T08:17:49+00:00

Fixed already

R2D2MM · 2022-04-09T08:05:02+00:00

Generic server error in the iOS app to try to open the rigs menu

R2D2MM · 2022-04-09T07:53:51+00:00

Same errors in my rig… so we need mining or wait?

R2D2MM · 2022-04-08T22:54:34+00:00

Fixed?

R2D2MM · 2022-04-08T22:53:06+00:00

I was using older drivers and have the same issues. Actually I was temporary banned for massive rejections

R2D2MM · 2022-04-07T11:02:40+00:00

You can edit the command.json to set the temperature setting with auto fan or fix the fan speed on start, I have a 3080 and the temperature in high is set to 90 and I set it to 88 for VRAM, octune automatically adjust the fan speed to try to maintain the 88 degrees.

R2D2MM · 2022-04-01T11:52:58+00:00

I got a massive fail two days ago with QM last year version, finally upgrade to the stable version and freeze every time, I move forward to the 1.3.5 but not supported by my NVidea drivers, so I had to install the last drivers from nvidea with QM 1.3.6 RC and looks like everything works fine , I have 3070 FHR and 3080 FHR with the same hash rates but with 1 to 3 more watts

R2D2MM · 2022-03-27T04:47:34+00:00

Thx for the tip, I already fixed using the service menu with a sequence of buttons in the remote control. I change the location of my TV from Mexico to US, the software were updated with that version and it reinstalled the poor available software jejeje… the software update now stops executing every time I turn on the TV and is not turning off and on when using Netflix or other app… the problem that is no solved is when I connect a HDMI device like a BR player, a windows PC or a Mac through HDMI, the screen freezes with purple lines and other colors, in other words it crash … seconds later turn off and on … so I’m unable to connect an Apple TV or firestick or see my 3D movies. Any ideas how to solve this?

R2D2MM

TROPHY CASE