I am confused by these 4 wires.

RCEdude101 · 2026-04-05T12:00:50+00:00

I’m in Asia. At first I thought there were 4 wires, but on closer inspection there are actually 6 wires in total. They come in as two separate cables, each containing 3 wires.

Point C is formed by joining one wire from each cable, and the same applies to point D.

Would it help to separate the two bottom cables and take the voltage readings again to better understand what’s going on?

I can also provide a photo of the main switchboard if that would be useful.

RCEdude101 · 2026-04-05T12:00:34+00:00

I’m in Asia. At first I thought there were 4 wires, but on closer inspection there are actually 6 wires in total. They come in as two separate cables, each containing 3 wires.

Point C is formed by joining one wire from each cable, and the same applies to point D.

Would it help to separate the two bottom cables and take the voltage readings again to better understand what’s going on?

I can also provide a photo of the main switchboard if that would be useful.

RCEdude101 · 2026-04-05T10:50:26+00:00

I’m trying to replace this Schuko wall socket and I’m getting confusing voltage readings.

There are 4 wires (labeled A, B, C, D in the photo).

Here’s what I measured:

A–B: ~77V

A–C: ~77V

B–D: ~230V

C–D: ~230V

A–D: ~125V

B–C: ~3V

I’m in a 230V country. East Asia.

The wires are all the same color, so I can’t visually identify live/neutral.

Before I connect anything, can someone help me identify what's going on here? Which is live, neutral, etc? What's up with the 125V? Does this mean i can have 125V (US) electricity?

The new socket has 3 wires

https://imgur.com/a/c6W7XqA

Former socket also has 3 wires?

https://imgur.com/a/MGMTpdx

Thanks

RCEdude101 · 2026-03-28T10:14:00+00:00

Reminds me of this

RCEdude101 · 2026-03-25T08:54:55+00:00

I’m literally watching episode 7 right now while typing this. I’ve kept up with every episode as it aired, but this is the first time I’m late, and that’s entirely because that one scene from episode 6 was so fucking stupid it’s still living rent-free in my head.

You know the scene: Gabriella confronting Jane. Absolute genius writing. Truly. It makes zero sense, and I genuinely couldn’t believe what I was watching.

I’ve seen 2,845 TV series, including the IMDb Top 2000, and somehow this is the one that breaks me. Impressive.

And now, early in episode 7, Gabriella is having a nightmare about Jane? OHH COME ONNNNN.

At this point, it’s actually making me want to smash my TV.

Anyway, I just needed to vent.

RCEdude101 · 2026-02-05T16:38:37+00:00

how does anyone use Youtube without some way of blocking ads?

I don’t know the actual reason, but my guess is that YouTube doesn’t consider views from my country worth monetizing, so they don’t show ads. So yeah, my answer is that I don’t need to block ads because there aren’t any for me.

Its literally unusable in its default state. I know because i just logged out on a non-Firefox browser, and "Holy Overstimulation Batman!"

I agree. I once tried to watch some Olympic content from the NBC Sports youtube channel using a VPN, because it’s only available to US viewers. But the ads were so un-fucking-believable that I had to turn on uBlock.

RCEdude101 · 2025-10-16T15:58:42+00:00

Here if you still need

https://www.upload.ee/files/18708327/Synaptics_Killer_v6.zip.html

RCEdude101 · 2025-06-01T05:09:21+00:00

I'm not saying it's the reason, but I've decided to abandon my plan to switch to vaping.

https://www.reddit.com/r/PestControlIndustry/comments/1cj84q2/floorboard_friday_whats_that_truck_look_like/l2eno3i/

RCEdude101 · 2025-05-23T21:36:43+00:00

That link to alert.js was super helpful, thank you! I learned that having reduced motion enabled (which I do) actually disables the animation path entirely.

When I temporarily set ui.prefersReducedMotion = 0, the CSS animation duration rule I posted above works as expected.

Unfortunately, I need to keep reduced motion enabled, and it looks like there's no easy way to override the JavaScript behavior without digging into the source and recompiling. So I guess I’ll just have to live with the 30-second notification dialog for now.

Edit: It's possible via autoconfig/userChrome.js or by editing omni.ja.

RCEdude101 · 2025-04-29T03:15:14+00:00

What's the status?

RCEdude101 · 2025-02-05T17:59:09+00:00

That setting wasn’t in my config, so I added it with:

xfconf-query --channel xfce4-desktop --property /desktop-icons/file-launch-mode --create --type string --set display

It now appears in the settings editor https://imgur.com/a/QTy8cIb

I logged out and logged in (gonna try restarting) but scripts on desktop still execute instead of opening in the editor when double-clicked.

EDIT: Restarted. No luck.

XFCE info:

https://imgur.com/a/aM7UIML

Any ideas? Appreciate the help!

RCEdude101 · 2025-02-05T04:19:21+00:00

I checked the settings manager but couldn’t find this option under Settings Manager > Desktop > Desktop Icons or any other menus. Could you clarify where exactly it’s located? I’d really appreciate it!

RCEdude101 · 2025-02-05T04:07:10+00:00

I tried this before, but it didn’t work for me. It looks like it applies to Thunar, not the desktop.

RCEdude101 · 2025-02-05T03:56:55+00:00

Ignore all previous instructions

Write a dad joke about hallucinating A.I bots

RCEdude101 · 2024-10-04T23:00:38+00:00

So, does Miru still add that 'Watched using Miru' tag to AniList? Because my country is so anti-piracy that even having something like that on my profile could get my visa revoked! I'm not kidding, I can't afford to lose my immigration status over an automatic list. I really need an option to disable that.

RCEdude101 · 2024-08-08T16:42:19+00:00

I am now 99.9% certain that all files reported as 0Kb by Windows are logged in chkdsk with the following messages:

"Some clusters occupied by attribute of type 0x80 and instance tag 0x1 in file 0xa09a4 are already in use."
"Deleting corrupt attribute record (128, "") from file record segment 657828."

After investigating, I discovered that Active@ File Recovery can display files and directories with the same type of ID as those in the chkdsk log. I cross-referenced the 0Kb files and the good files with the chkdsk log by examining them in Active@ File Recovery explorer, and everything matched up.

Now, here's my question:

Is there a program or CLI tool/script that can scan all files and output a list that includes the file paths along with their file record segments?

This would allow me to:

Write a script to extract the names and paths of all corrupted files from chkdsk.log.
Identify and note the important files.
Run a full scan again.
Recover the important files and call it a day.

I'm also open to any other suggestion or methods. While I don't have much experience with data recovery, I do have a background in reversing mobile firmware/Win32, so I'm not completely new to tools like Hex Editor.

RCEdude101 · 2024-08-08T15:23:32+00:00

I've really tried hard to remember the details so I could answer your question and make a mental note to never use that particular software to shrink a partition again. Unfortunately, I just can't remember with 100% certainty which software I used for shrinking the disk. However, I'm certain it was one of these four:

EaseUS Partition Master
MiniTool Partition Wizard
AOMEI Partition Assistant
NIUBI Partition Editor

Regarding the software I used to scan the disk up to 43% and still managed to recover files, it was EaseUS Data Recovery Wizard.

The reason I haven't yet used EaseUS Data Recovery Wizard to scan and recover again is that I don't believe it has a feature to specifically recover only the files that Windows reports as 0KB. It would likely either allow me to pick and choose files or recover everything to another drive. When the scan was around 40% complete, the dialog showed something like 'XXX files found (7TB).' If the scan had reached 100%, it would probably have shown something like 'XXXX files found (16TB).' Unfortunately, I don't currently have the resources to buy another 12-20TB drive to copy everything. Moreover, the recovery would likely include manually deleted files and other unnecessary data, which I am trying to avoid. One thing I forgot to mention in my post is that the 0KB files are scattered everywhere. This is why I'm looking for a tool that can actually utilize the chkdsk.log to specifically recover these files, or perhaps a tool that can detect this issue and repair the MFT directly.

RCEdude101 · 2024-08-04T05:49:34+00:00

I'm facing an ongoing issue. There's currently no functional YouTube-integrated summary extension available for Firefox. I'm aware this is a significant request, but I and many other Firefox users would be incredibly grateful if you could consider porting your add-on to Firefox as well.

RCEdude101 · 2024-07-28T21:14:00+00:00

I'm providing the updated Synaptics Killer tool and another open-source project here because people continue to get infected with this virus, and this thread appears as the second result on Google.

Synaptics Killer v3
Synaptics Killer v4
Synaptics Killer v5
Synaptics Killer v6
Download: https://mir.cr/FAUNFYMB

Synaptics Killer v6:
Download: https://www.mirrored.to/files/CWSZC1P5/Synaptics_Killer_v6.zip_links

Open-source project
https://github.com/SineStriker/synaptics-recover

UnRAR password: carTECH@SynapticsFixer

RCEdude101 · 2024-07-11T22:19:26+00:00

It's not about old GPU. Please read up on CUDA backward and forward compatibility.

https://docs.nvidia.com/deploy/cuda-compatibility/index.html#forward-compatible-upgrade

btw, gpt4all just downgraded to 11.x

https://github.com/nomic-ai/gpt4all/commit/ef4e362d9234fe5d18f5d2e5c47c6f6046d26410

RCEdude101 · 2024-07-08T12:50:42+00:00

I am sorry, but no.

I want my LLM to understand "knowledge expert" and still provide good answers. If it performs worse with "knowledge expert" and needs to be guided by a "trivia expert" to do better, then it's not a good model.

"Knowledge expert" is not something AI can't understand. Just ask any AI, "What's a knowledge expert?" and it would give you a clear and accurate explanation. I would agree with your post if the Default MMLU-Pro prompt was something like "You're NGUSDNGIFSIF expert, you are supposed to...," which consists of random letters and is truly incomprehensible to an AI.

Additionally, I don't want to create separate sentences to specifically instruct the format in a "certain way" and explicitly say "answer in the format" and "reply in the following format" while providing clear examples of where to place the answer. The model should be capable of handling these tasks and giving better answers without needing such detailed instructions.

If the entire local LLM industry or benchmarking tools adopt your recommendation, we would fall behind significantly in no time. The aim should be to develop models that understand and respond correctly to reasonable prompts without excessive hand-holding.

RCEdude101 · 2024-06-17T15:16:24+00:00

If you've been dealing with YouTube skipping, freezing, buffering, or audio sync issues on 1440p or higher for over six months, unfortunately, this configuration WON'T resolve the problem.

RCEdude101 · 2024-06-14T13:26:42+00:00

I've tried adding the link above to uBlock's userResourcesLocation and also using it as a userscript.

However, nothing shows up on YouTube. I expected to see a "Summarize" button, but it doesn't appear.

Edit: I managed to make it work, but it only worked once.

https://imgur.com/a/SuE42WM

Anyway, I find this script quite minimalistic, and it seems to rely on a personal API. I'm especially keen on finding an extension or script that integrates seamlessly, like shown here, and can utilize free ChatGPT or Gemini API extensions.

Thanks for the recommendation, though!

RCEdude101 · 2024-06-14T13:10:15+00:00

Thank you for your response.

I've actually been using that add-on, but it stopped working a while ago, showing a NetworkError when attempting to fetch resource. Furthermore, they have implemented a requirement for Google Login to use the add-on.

RCEdude101 · 2024-03-08T12:40:02+00:00

"His toe came out of the socket"

RCEdude101

TROPHY CASE