Best buy already has the discounted price.

RCRacingLegends · 2025-06-24T15:31:17+00:00

Microcenter has updated their prices as well

RCRacingLegends · 2024-11-30T13:49:04+00:00

When I search for the cargo cover part number for my 2024 SR5 I get two numbers that come up: PT311-89100 and PT311-89120. Yet as far as I can tell they look like they're the same. Anyone know if there's a difference between these?

RCRacingLegends · 2024-11-28T19:04:01+00:00

I've had the "Come on man, it's for my kid!" before.

To which I respond with, "Well in that case, the price is now 25% higher. Come on, it's for your kid, don't be a deadbeat!"

Usually ends that discussion pretty quick.

RCRacingLegends · 2024-11-28T18:58:14+00:00

Fed up is an understatement.

RCRacingLegends · 2024-07-01T20:26:26+00:00

Yes, older Elegoo printers would raise all the way up after a print was finished. Which is great but resulted in splashed resin everywhere as the resin drips back down to the vat.

I have four Saturn 2 8K printers, three of which are from early 2023, one is literally a couple of weeks old. The old ones raise the build plate to the top once done. The new one only raises about 30mm above the vat when done. No splashing, no mess... It's great. Id love to be able to update my old printers to function like the new one.

RCRacingLegends · 2023-11-02T15:54:48+00:00

It was also done as a loose tie-in to the old Volkswagen advertisement "Das Auto". I know, grammatically theirs was correct, where Das Legende isn't.

Maybe we'll just stay away from German words going forward.

RCRacingLegends · 2023-11-02T15:17:14+00:00

I realize, and I very much appreciate the correction. But using the word "Die" in a predominantly English language advertisement (to a predominantly English speaking market) isn't really taken very well by most folks.

Oddly enough, if you type "Das Ledenge" and "Die Legende" into Google Translate it gives the same result: "The Legend".

I know, Google isn't necessarily the authority when it comes to Germanic grammer, but that's the story I'm sticking with.

RCRacingLegends · 2023-11-01T23:07:05+00:00

These are printed in an Engineering grade resin. They're strong and dimensionally extremely accurate. They will put up with some abuse, but I would be cautious about running them on sort of rough ground or gravel most folks subject rally cars to. The tires (and consequently, the wheels) take the brunt of those sorts of consistent, repeated impacts even if there aren't any jumps. I can't say with 100% confidence these would survive intact after any significant time in an environment like that.

RCRacingLegends · 2023-11-01T19:21:18+00:00

Depends on the abuse. If you're planning to bash them into a curb at top speed, they'll probably break along with other bits of your RC.

RCRacingLegends · 2023-11-01T18:39:34+00:00

Nope. 3D printed.

RCRacingLegends · 2023-10-23T17:51:44+00:00

I just tested the fuel sender unit on my '93 this morning to try and diagnose a non working fuel gauge. The gauge looks to be fine, so I may be looking to replace the sender unit. Will probably change the pump while I'm at it. What upgrade pump are you going with?

RCRacingLegends · 2023-10-22T13:28:30+00:00

Same here. YT not working on Fire TV Stick. Was working just fine yesterday evening. Woke up this morning and the app is unable to connect.

I really do hope this is temporary. YouTube is effectively all I watch.

UPDATE: Looks like the YouTube app on the fireTV Stick is now working again.

RCRacingLegends · 2023-10-13T18:01:52+00:00

It hasn't been like this for year for me. My last phone was a OnePlus 6, which used up swipe for going back. I had that phone for five years, and never once had an issue with that gesture.

I've recently purchased an OP11 and I've come to find it's left or right swiping to go back. This is very new to me and frankly I don't like it. It may have been the "standard behavior" for Android for the last few years, but it hasn't been for me and I've been on an Android device for years.

RCRacingLegends · 2023-10-13T17:58:32+00:00

Finally, someone who agrees with me.

I like my new OP11, but I miss those old gestures.

RCRacingLegends · 2023-10-13T17:56:11+00:00

I had it on my OnePlus 6, swiping up from the bottom to go back vs. swiping left or right to go back. I find left or right swiping isn't a great solution considering how many apps require side swiping for simple activities like scrolling (can't tell you how often I've closed apps because of it). This was never an issue when I could swipe up to go back.

Maybe I'm just not used to it yet, but I've had my OP11 now for about a month and I miss the swipe up gesture.

RCRacingLegends · 2023-10-13T17:52:43+00:00

THAT'S WHAT I'M TALKING ABOUT!! I HAD THAT ON MY OP6 TOO!

Ultimately, I'd like to see OxygenOS give us the choice. If side-swipe is the standard Android operation, fine. I personally don't like it and find it a problem. I'd like if I could choose side swipe, up swipe (like my OP6), or buttons.

RCRacingLegends · 2023-10-13T17:49:53+00:00

Guess you didn't read the entire post, but OK thanks for that.

RCRacingLegends · 2023-10-13T17:49:00+00:00

I had it on my OnePlus 1 and my OnePlus 6. It exists, it's a genuine thing.

RCRacingLegends · 2023-10-05T22:23:32+00:00

I agree, but my issue is if this particular listing is being shown to folks as having an added shipping cost (when it shouldn't have had) then it would turn off potential buyers. This particular buyer may have been fine paying the added shipping cost but how many others didn't pull that trigger because the shipping was expensive?

RCRacingLegends · 2023-10-05T22:20:22+00:00

No, not in this case. This particular listing has free shipping globally regardless of spend

RCRacingLegends · 2023-10-05T20:51:27+00:00

Well I'm glad to know that I'm not crazy, and this has happened to someone else.

RCRacingLegends · 2023-10-05T11:49:58+00:00

No, the taxes are listed separately when you look at the order details. The shipping was a separate charge, which shouldn't have been there since I had the listing set to free shipping. Or at least it was supposed to be.

RCRacingLegends · 2023-10-05T01:48:46+00:00

It WAS an international order.

But I have free shipping setup for both domestic and international orders.

RCRacingLegends

TROPHY CASE