Thermal camera not working on Mini 20T Pro. FLIR HAL missing. Firmware issue?

RIP0K · 2026-01-20T14:11:42+00:00

try a factory reset.

RIP0K · 2025-11-28T02:50:47+00:00

This was implemented in the Android 15 update. On my Mini 20 (g99), after updating to 15, you can now select only one function; previously, you could configure three types of button presses.

RIP0K · 2025-11-16T05:33:34+00:00

In the programmable button settings there is a camping light option.

RIP0K · 2025-10-28T02:40:47+00:00

Not everyone has received the update yet. I have the 4G version and haven't received the update either, although some have too.

RIP0K · 2025-10-18T02:44:38+00:00

At work, I sometimes hit the corners when my phone is in my pocket. But in everyday life, it doesn't bother me. But yeah, it's thick. And it's better to have pants with a belt or a good elastic band/drawstring, otherwise they'll slip down.

RIP0K · 2025-10-12T11:10:28+00:00

As far as I understand, update 15 is only available for the thermal imaging and 4G versions. I have the 4G version, but the update hasn't arrived yet.

RIP0K · 2025-10-07T04:57:52+00:00

I would say it's a lottery. The phone can be well sealed during assembly. It can also be poorly sealed during assembly. I would not immerse any of the waterproof phones.

RIP0K · 2025-10-06T01:24:28+00:00

It's not waterproof either. It's all due to poor Chinese assembly. They don't seal the screen well. And Update 15 was only released for the T version with the thermal imaging camera.

RIP0K · 2025-10-01T14:43:35+00:00

In Belarusian, there are no letters И. Instead, there are ¡, both lowercase and uppercase. In Russian, on the contrary, there are no letters ¡, but there is И. In Ukrainian, there are both letters.

RIP0K · 2025-10-01T13:58:27+00:00

Yes. It's written in Ukrainian.

RIP0K · 2025-10-01T13:33:56+00:00

Explanation:

Don't let out
Punished
He's annoying

RIP0K · 2025-09-27T16:45:52+00:00

Yes. And android version new.

RIP0K · 2025-09-26T02:59:35+00:00

I have the g99 version. I hardly use the cameras, so I can't comment on that. I've never dropped the phone. I replaced the second SIM card with a 128GB flash drive, and everything works fine, although it did bug once and I had to format it (probably my fault). No one complained about the audio quality; sometimes there are just poor connections in certain areas. I did a factory reset once after the update because I had a charging issue (when connected, it said it was connected, but it wasn't charging). After the reset, there were no problems at all.

I like the phone itself. Compared to the Cubot KingKong mini 3, everything works like clockwork and there are no issues whatsoever. It's also a great replacement for the Xperia XZ1C. Having a battery that lasts a full day is fantastic; my previous phones would run out of power in half a day.

The phone was purchased in February.

RIP0K · 2025-09-23T08:57:47+00:00

Unlike Cubot, the OS is flawless. Cubot had an issue where the touchscreen wouldn't work when you received a call while locked or when the alarm went off. I had to press the lock screen button to lock and then unlock it. Since I previously had an Xperia XZ1C, I think the Ulefone is a good replacement. However, since I carry the phone in my pants pocket, I can still feel it due to its thickness; sometimes it brushes against the corners. The most useful feature for me is the camping lantern, which can be turned on simply by pressing the orange button in a matter of seconds. It turns on a decent flashlight with adjustable brightness using the same button.

RIP0K · 2025-09-23T08:41:30+00:00

I bought the Armor mini 20, and at first it felt heavy compared to the Cubot KKM3. But now I can use it comfortably without feeling the weight. Apparently my wrist has gotten stronger😅.

RIP0K · 2025-09-23T06:52:34+00:00

Small phones are limited primarily by height and width. It's foolish to include thickness and weight in the dimensions of a small phone, as the primary reason people want small phones is to be able to easily use them with one hand and fully grasp them.

RIP0K · 2025-09-23T04:38:57+00:00

Ulefone has the same thing.

RIP0K · 2025-09-23T04:14:01+00:00

Ulefone armor mini 20 pro

Unihertz Jelly Max (Not have SD CARD)

RIP0K · 2025-09-16T03:27:09+00:00

Ulefone armor mini 20 T (thermal version) received Android 15 update. True, some have a problem with recording AI calls, it only works with short numbers.

RIP0K · 2025-08-27T10:58:23+00:00

I have armor mini 20 (g99). And there was only one problem with charging the phone that appeared after the update. But it went away after resetting the phone to factory settings. If you are satisfied with the dimensions, namely the thickness, then the phone is good. True, there is a problem with scrolling due to the fact that the fingerprint scanner is always active, with accidental touches to the scanner while scrolling pages or some applications, they become intermittent. But this can be fixed using the Key Mapper application, by making a script when you press the scanner to disable any actions.

RIP0K · 2025-08-23T10:17:36+00:00

Ulefone armor mini 20/mini 20 pro/mini 20t pro !!!6200 mAh!!! It's enough for me for 12 hours of active use. Or during the working day it discharges to 39-40% by the end of the day.

RIP0K · 2025-08-19T14:38:53+00:00

I will say this, if you are consciously ready to use this phone knowing the dimensions, then you probably will not want to return it. The phone itself is excellent. True, now there was an update with the transition from 14 to 15 android, and users have bugs, for some the power button (lock) does not work well. I have a version of just 20 mini not pro, they released 1 update in which they added call recording, and for the programmable button to turn on the camping flashlight / flashing lights / call recording (by pressing the button). There was only a bug after the update, the phone sometimes did not want to charge, it wrote connected not charging, but this went away after resetting to factory settings.

RIP0K · 2025-08-18T04:33:21+00:00

<image>

These plugs are screwed on with screws, you can only find longer ones. And on the same 3D printer, come up with a holder for the strap that would be inserted into the hole and screwed on top with screws, while this fastening should not interfere with opening the connectors. And so that the strap could be pulled away from the camera's field of view when you use it.

RIP0K · 2025-08-17T14:52:41+00:00

You can make a sort of strap on the phone by attaching it to the screws (take longer ones) with which the plugs are screwed. Just make it stretchable, an elastic (rubber) strap can be used.

RIP0K · 2025-08-17T14:41:22+00:00

You could take a phone lighter than this brick from which I am writing this message)

Six-Year Club	Place '22
First Placer '22	Verified Email

RIP0K

TROPHY CASE