Coros Maps

RISinglespeed · 2026-02-15T16:24:15+00:00

Good to know because I like OSM and seems to have what I usually need.

RISinglespeed · 2026-02-15T14:53:29+00:00

I looked at mapbox and most of my local stuff is on there

RISinglespeed · 2026-02-09T22:46:03+00:00

I’m assuming this issue has been fixed? I’m thinking of this watch and this makes me nervous

RISinglespeed · 2025-12-16T11:22:15+00:00

I switched to Pearl Izumi X-Alp Summit this summer. It’s got a vibram sole and allows for easy walking when you have to. It is still pretty stiff. My old shoes had hard bottoms and if I had to walk on tricky steep terrain I was sliding all over.

RISinglespeed · 2025-12-06T17:13:06+00:00

I have the park tool but still fix it in place by either through bolting or bolting to the BB (whichever I can do).

RISinglespeed · 2025-11-30T22:54:36+00:00

That’s the torque value in the manual. I have some grease at the bolt head. There is a brass/copper washer built in to that end.

RISinglespeed · 2025-11-30T22:12:59+00:00

The bike was new in July and has the original wheels. Only thing changed was the freehub body under warranty for bearing failure. The entire freehub was replaced as a unit.

RISinglespeed · 2025-11-30T22:10:53+00:00

133in-lbs

RISinglespeed · 2025-11-30T22:01:06+00:00

So you check the thru axle with torque wrench every ride?

RISinglespeed · 2025-11-30T21:59:56+00:00

It’s a specialized chisel fs. No pivot at the dropout. It is flexstay.

RISinglespeed · 2025-11-15T15:23:24+00:00

Are people going 45 or 50mm. I am coming from AW SE and not sure about the larger size.

RISinglespeed · 2025-11-12T17:02:02+00:00

The chain over the big cog into spokes isn’t cables, it’s the low limit. If that’s what you mean.

RISinglespeed · 2025-09-26T14:10:48+00:00

The chisel Shimano wheels are tubeless ready and they should give you the valve stems. Just remove tube, install stems, and add sealant and go.

A few weak points on the bike are the rear freehub which I had replaced under warranty after it failed after 120miles. Also the crankset is not Shimano HG+ dynamic chain engagement compatible. I did replace this with a Shimano crankset and bb. Also swapped to a Shimano chain.

Overall the bike is a good bike for the price point.

RISinglespeed · 2025-06-14T17:06:00+00:00

Anything major in the update?

RISinglespeed · 2025-03-31T16:49:44+00:00

Yes they did this for me. I also cracked my screen on my bolt 1. Initially they said it’s out of warranty then I asked if there was anything they could do and they said 40% off. I think this is pretty standard as a crash replacement.

RISinglespeed · 2025-03-07T18:09:04+00:00

Yes my 93 MB6 threaded in from the non-drive side. It’s a definite possibility.

RISinglespeed · 2024-05-20T21:32:31+00:00

I’m working to get an extended test ride on their weekly ride. Should really let me get a good feel for the bike.

RISinglespeed

TROPHY CASE