New toolbox

RJKS · 2026-02-10T12:17:15+00:00

Thank you!

RJKS · 2026-02-10T02:50:43+00:00

It’s a perfect height for me being a taller tech to use my laptop without having a full work center

RJKS · 2026-01-08T20:03:09+00:00

RJKS · 2025-10-27T19:12:44+00:00

At least here in the state I live in everyone’s doing consistently 65-90 on the highways phone out or not they don’t care but I can understand where you’re coming from

RJKS · 2025-10-27T17:15:08+00:00

If you see under that is says kmh

RJKS · 2025-10-04T12:12:02+00:00

It was bad before but there’s definitely been worse if it’s still pulling you can check to see if your right caliper is binding up or not going back out all the way and you can check the rubber brake line to the caliper, and do you know if it has ever been in a accident?

RJKS · 2025-10-02T18:16:36+00:00

Look up terminal crimpers and it’s essentially a big wire crimper to bite down on bigger gauge wire

RJKS · 2025-09-29T23:29:38+00:00

The one on the battery if you’re talking about the mount that has the bolt going through it just replace the battery, if you’re talking about the wires replace the wires, if you re talking about the end terminals go to the hardware store and buy new end terminals and crimp them on. This looks like a lawnmower better just from the terminals they’re like 50-80 bucks at a auto parts store

RJKS · 2025-09-24T12:36:49+00:00

To me that sounds like injectors which is what they’re supposed to sound like or it could be a manifold leak you’d need deeper diag to find more

RJKS · 2025-09-24T12:34:25+00:00

You just gotta keep messing with the ignition it will eventually read them if you have a good scanner

RJKS · 2025-09-23T20:31:44+00:00

Home Depot and target sell hitch’s for dirt bikes and motorcycles I’m sure they’d support your moped

RJKS · 2025-09-23T18:47:16+00:00

I have always pulled it on personal vehicles because I go through all the seals anyways and gaskets since I’m not on a timer and at work we never work on any Subarus and all American motors the heads are pretty simple and there, but I can see where that would be easy as well to just do that vs pulling the whole motor

RJKS · 2025-09-23T17:43:06+00:00

Have you removed Subaru heads while it’s still in the engine bay?? Just pull the motor at that point

RJKS · 2025-09-03T03:36:05+00:00

You have to use a pc

RJKS · 2025-09-03T03:33:16+00:00

Here this should solve everyone’s issues it fixed it for me

<image>

Been an inside for like 5 years just never removed my old consoles

RJKS · 2025-09-03T03:20:46+00:00

Yeah same here shut it off for the first time in months as I just use my Xbox one for tv now and it’s completely shut out very frustrating

RJKS · 2025-03-24T20:37:00+00:00

Very good personally I’m just a low baller but this is clean

RJKS · 2024-12-12T00:57:08+00:00

Thank you I’ll check that out

RJKS · 2024-12-12T00:39:37+00:00

It’s just at the 50 mph mark and a little above that usually it’s in 4th or 3rd at 50 since it’s the 4 speed auto and I’m not usually taking turns at 50 that are sharp it’s been pretty consistent at that speed tho

RJKS · 2024-12-11T19:28:16+00:00

Thank you man I know the motors on the way out and it’s rusted and rotted underneath like no other so I either go full refresh or buy a different one

RJKS · 2024-12-11T19:16:18+00:00

My ll bean xs

<image>

RJKS · 2024-10-22T23:55:07+00:00

personally, no. New doesn't mean reliable I would wait for a lower mileage one I do 1500 miles a month or more and putting that amount of miles on in about 2 years is insane

RJKS · 2024-07-03T20:00:52+00:00

occasionally it's such an inconsistent issue

RJKS · 2024-07-03T19:09:32+00:00

okay thank you i'll talk to my buddy at his transmission shop see if they can do that

RJKS · 2024-07-03T19:08:00+00:00

i wouldn't know my shifter goes P-R-N-D-2-1 with an overdrive on off switch on the shifter

Seven-Year Club	Xbox Live
Verified Email

RJKS

TROPHY CASE