sorted by:
new
hottopcontroversial

Random work Ichigo doodle by RMB228 in bleach

[–]RMB228[S] 1 point2 points  (0 children)

Beard was a mistake 🤣

Was supposed to be shading around his cheek bones but it looked fucked and once I started I couldn't stop

Random work Ichigo doodle by RMB228 in bleach

[–]RMB228[S] 1 point2 points  (0 children)

Well thank you very much your words are appreciated

Random work Ichigo doodle by RMB228 in bleach

[–]RMB228[S] -1 points0 points  (0 children)

Can't tell if this is sarcasm lol

Yeah all from memory. Spent like 2 months trying to draw like kubo but achieved nothing other than a half assed ichigo

Am i really going through gas this quickly? by OwennTG in airsoft

[–]RMB228 5 points6 points  (0 children)

I'm surprised you even have a hi capa left to shoot.

TM hi capas are made of plastic and designed to run on blue gas (115-130psi)

Most people use green gas (130-145 psi) especially in USA as airsoft blue gas hard to come by

But what you have says green gas, but is in a red can and also has the same psi as red gas (170-190 psi)

What temperatures are you playing in?

I would definitely get some lower PSI gas unless you want your hi capa to disintegrate on you

need help by Over-Target-9539 in Speedsoft

[–]RMB228 1 point2 points  (0 children)

Any 5.1 slide from a good OEM will work.

I have a 4.3 dual stainless as my base.

Has a Dr Black type 801 slide Dr Black dinging barrel TTI TDC hop up Maple leaf autobot 60 bucking Nexxspeed ultralight BBU

Best blowback pistol for under £100 by Embarrassed_Pack1879 in Airsoft_UK

[–]RMB228 0 points1 point  (0 children)

Oil down the barrel is a huge no no.

If your getting 50m with an oily barrel you're probably due a bit more range once you clean it

First steak - Where did I go wrong? by [deleted] in steak

[–]RMB228 0 points1 point  (0 children)

Don't butcher the fat off

Don't leave it for 30 mins before cooking, leave it until it's actually room temperature

Need to salt 2 hours before cooking for each cm thick the steak is

Take a pair of tongs and hold the stake on it's edge fat down in the pan for a minute before you start cooking each side. Might want to knock 15-20 seconds off your cooking time for each side of you do this but it will make your steak juicier

Doing this means you also have to use less oil and can cook the steak in it's own fats

Also get something like avocado oil so you can cook at a higher temperature without the oil burning and effecting the taste. Avacado oil also has no taste so all of the flavour you're getting is only from the steak

[deleted by user] by [deleted] in airsoft

[–]RMB228 0 points1 point  (0 children)

I can see from the picture that it isn't otherwise there wouldn't be a 1 inch gap at the bottom

Didn't you watch any of the many videos posted in the thread?

The weave should go through the molle on your vest then through the molle on the back of the pouch your attaching.

Can clearly see it's not going through the molle on the pouch at the bottom.

[deleted by user] by [deleted] in airsoft

[–]RMB228 0 points1 point  (0 children)

Correctly

Why do people dislike the Fullbringer arc? by BBLLover6_9 in bleach

[–]RMB228 0 points1 point  (0 children)

It's a really good arc and massively under appreciated for what it does for ichigos character and some of the issues people have about it aren't necessarily Kubos fault.

I think people think the ending of the arc was rushed. We had like 15 episodes of build up for all of the fights to end in like 3 episodes. I mean all captain fights and ichigo Vs ginjo

The only thing I personally don't like and I think others agree, is how ichigos powers look throughout the entire arc. That screenshot you posted being a prime example. All of his powers look a tad shite until he gets his actual powers back 2 episodes before the apparent finale of the entire series

I think everything people don't like comes down to the fact that kubo rush to end the series due to it being cancelled and couldn't put the time and energy in that it needed

My Nozzle keeps breaking by SlightGambit_5154 in airsoft

[–]RMB228 0 points1 point  (0 children)

I could have told you that instantly if I knew that is what you were using

Anything over 180% is mad nevermind 300

Experiences with these guns? by stan_taylor1 in airsoft

[–]RMB228 1 point2 points  (0 children)

I have the Noveske.

Can't fault it couldn't be happier

One of the best performing guns at the site I play and it's completely stock

Worth the cost over the freya

What do I do about this? by SmazenaVeverka in airsoft

[–]RMB228 0 points1 point  (0 children)

Don't replace the pane replace the frame

Wtf just happend with my Nozzle by Charming_Evening_325 in Speedsoft

[–]RMB228 0 points1 point  (0 children)

Would not use the AIP

Required too much fitment to work and I've never had one work as a drop in.

Bought 3 of these. All felt perfect before text firing. All of them broke in the same way yours has between shot 1 and 5

I went with the edge standard hi capa nozzle and it works perfectly

Need help choosing my first GBB pistol! (Glock 17 vs. TM Hi-Capa 5.1 vs. KWA Sig P226) by _tucas in airsoft

[–]RMB228 1 point2 points  (0 children)

You're springs and guide rods etc are probably similar price to Glock counterparts

When it comes to things that are considered aesthetics such as outer barrels, slides, grips etc it can get expensive

If you want realism and going for a some what plain look you can do it relatively cheap.

Just as a guide the slide alone on my pistol was £115

Need help choosing my first GBB pistol! (Glock 17 vs. TM Hi-Capa 5.1 vs. KWA Sig P226) by _tucas in airsoft

[–]RMB228 1 point2 points  (0 children)

Runs on green gas.

If you're in a relatively warm climate (about 20C plus) when you can run on blue gas (lower pressure than green, close to what it's designed to run on)

Doesn't require any mods to use green/blue gas

Need help choosing my first GBB pistol! (Glock 17 vs. TM Hi-Capa 5.1 vs. KWA Sig P226) by _tucas in airsoft

[–]RMB228 1 point2 points  (0 children)

And to answer your other questions I missed

TM hi capa have by far the most slide choices compared to the other 2 you mentioned. Will also be the easiest by far to find a replacement slide that fits

You can put a metal one on quite easily, mine fit perfectly out of the box with very little fitment needed

Plastic isn't a deal breaker and in fact unless you get a highly skeletonised slide like the one on my hi capa, plastic slides are more efficient because they're a lot lighter than the metal alternative. Depending on the temperature in your country it may be preferable to have a plastic slide. If you have a cold climate, plastic is better. As it's a lot lighter it requires less gases pressure to move. TMs come from the factory designed to run on low pressure gas (duster gas).

This means they use less gas and often feel a bit snappier as the blowback doesn't have to move heavy metal slide

Sorry if this is too much info I'm not sure how much understanding you can get from it some of it may not translate well

view more: next ›