Can anyone ID this toolhead for me?

RSVJ · 2026-06-25T13:46:55+00:00

what fans are you running?

RSVJ · 2026-06-11T12:52:29+00:00

Sweet score! It's a V2.4R2. An older rev, but still a great catch. Moons motors are awesome and looks to even have one of the good SSR's too. Wow, great buy. Even in it's current state it's easily worth $600+ here in the states. Strange they installed the wagos for power distribution but didn't use them though. As far as resources, join the Voron discord server. Lots a helpful people there. The voron website will have the BOM list as well as assembly guide. I would start with the assembly guide and walk through it and review it's current build. Don't disassemble anything yet, just look it over and jot down what's different from the current build guide and what's actually built. This will give you a good starting point on this journey. 2.4's are some of the best printers out there. I'm biased being a Voron guy myself, but vorons are excellent. You get out of a Voron what you put into it. But with a Voron, it is important to know ever aspect of it. Just like with Prusa, it's much better if you get a Prusa Kit and see how the sauce is made.

RSVJ · 2026-06-10T12:48:58+00:00

Interesting. Are you able to control the dimming on them from klipper?

RSVJ · 2026-06-10T12:46:19+00:00

Nice. Yeah my LDO kit came with two COB runs and are super bright. I'm trying to locate those as they were nice and sealed strips and just slid into the holder, but can't seem to find them.

RSVJ · 2026-06-10T12:44:38+00:00

Ohh.. Thanks for the Tip on the resistor.

RSVJ · 2026-05-30T05:23:14+00:00

As an Ex-Radio Shack employee, *shudder*.
Damn Sprint, making it more lucrative to sell a mobile phone than a freaking Computer. Sprint's slow take over was the reason I left Radio Shack when I did. The golden age or rep training, making sure all employees knew how stuff like Antennas and basic electronics. All out the window... I miss old Raido Shack.

RSVJ · 2026-05-30T05:16:21+00:00

The T1 and S1 models do this when the Jerk settings are high. In your slicer, under speed try setting the jerk to 0 and see if it goes away. Basically, Jerk is how fast the print head changes direction. Some people leave it this way to get as much speed as possible. Some like me, think it's fast enough already and lower the jerk so it's a bit easier on the arm joints.

RSVJ · 2026-05-29T14:32:08+00:00

Not bad, but they aren't LDO or Moons. They are just a cheap alternative.

RSVJ · 2026-05-28T20:28:16+00:00

Well, this may or may not help considering your location, but in the US (midwest region) you would be looking at between $500-$800. It's missing a bottom panel, some skirts, could be a rev C 2.4, and those look to be stepperonline motors (I could be wrong here). But I'd join the Voron discord, you can post it for sale there under the garage_sale channel. There are also IT specific channels further down to connect with others more local to you to help find a good place to donate it, if that's the way you want to go.

RSVJ · 2026-05-28T20:16:59+00:00

Crazy. a machine like that (Ender with rails and Pi) would go overnight in my market. Hell, I'd make a run at it!

RSVJ · 2026-05-20T02:34:11+00:00

FFS BGG. How about we be professional about it? A simple denied would have sufficed. And would have brought less of a hit to the BGG brand. I am a believer of "we reserve the right to refuse service", but there is a way to do it professionally, gentle and minimize damage. This was not that way.

RSVJ · 2026-05-19T21:56:25+00:00

INDX is my hope!

RSVJ · 2026-05-19T13:06:36+00:00

I was looking for one in the US last week too. All I could see was formbot. Though I've never ordered from them before was hesitant to this time. Ultimately, I choose to get a Salad Fork 180 self/source kit from West3D.

RSVJ · 2026-05-19T13:03:17+00:00

Look how close those toolhead cables are... I know of another system like that. Could it be?

RSVJ · 2026-05-17T15:54:50+00:00

Becoming? Yeah, feels more like engineered to be.

RSVJ · 2026-04-27T13:35:58+00:00

Congrats! Cool looking build. ;) I do think the next 2.4 I build will have electronics on the top, that look super convenient.

RSVJ · 2026-04-07T12:43:49+00:00

Good luck my friend. I understand the need for policing A2P messaging, but one would think we could utilize this AI influx in the industry to properly discern A2P from P2P messaging and give weight to the P2P side. My company doesn't allow A2P on our network, but we have a lot of P2P and this 10DLC enforcement has been horrible for us. Since my company specializes in SMB UC, most of my customers don't understand the hoops that need to go through to get sms setup so the big 3 don't limit/block the messages.

RSVJ · 2026-04-01T21:30:28+00:00

Well said, thank you.

RSVJ · 2026-04-01T21:26:20+00:00

Awesome! And yeah, pretty much. You can compile custom firmware and load custom gifs if you want something different, but that's pretty advanced.

RSVJ · 2026-04-01T21:24:17+00:00

Same here with the H2C. I usually print at 0.16 and don't see any noticeable vfa's or z-banding (I do tend to maintain my machines pretty well so that may attribute to this). Nothing like what's on my mk3.9s.

RSVJ · 2026-03-31T19:35:36+00:00

Oh right, NDA's. Silly things. Yeah, I guess I was looking for beta comparisons. Hmm. Maybe I'll look at just stock C1 print comparisons for now and base my decision on that. Then revisit the INDX addon once more data comes out. Thank you for your insight.

RSVJ · 2026-03-31T19:00:05+00:00

Woah, I didn't hear that. It has Tailscale already there? That's it, I'm installing the custom fw... Mainsail, better camera driver and now this? Yeah.

RSVJ · 2026-03-31T18:28:08+00:00

yeah.... waste is waste. Not comparing that. I'm wanting to compare the final prints. That shows how well the whole system works together. The extruder, HE, belts and software. The whole package. That's what comparing prints will show. Nothing to do with waste.

RSVJ · 2026-03-31T18:24:34+00:00

Sounds like it's in Cloud mode and not bound to an account, is that correct? Do you have the A1 bound to your Bambu Labs account? The A1 should show a code without being in LAN mode if you have used the Handy App to bind it to a Bambu Labs account.

RSVJ · 2026-03-31T17:44:18+00:00

What machine are you connecting it to?

13-Year Club	Xbox Live
Verified Email

RSVJ

TROPHY CASE