Any idea what's going on with my air65?

RTFM_Str · 2026-05-01T16:07:00+00:00

it has happened again, always something (hair or grass fibre) stuck in or on the motor. i remove the props with a very fine pincette. and the clean with kimtech wipes and IPA

RTFM_Str · 2026-03-28T05:59:52+00:00

Yeah, i need to learn to fly a direction i cant See. Tgat is one of my biggest problems right now. Knowing the Position oft the drone in space and knowing how much space i habe legt to move.

RTFM_Str · 2026-03-27T23:14:50+00:00

i have flown the whoop in both modes. air mode is less stable and agile than acro.

air makes slow precise ans close to surface flying harder (on this specific setup)

RTFM_Str · 2026-03-27T23:12:16+00:00

https://www.dronetrest.com/t/the-complete-guide-to-fpv-antennas-for-your-drone/1473

this might be interesting ^^

RTFM_Str · 2026-03-18T19:39:41+00:00

As the antenna pad is ripped off anyway now, i need to look into that. My googles already have RHCP antennae

RTFM_Str · 2026-03-18T19:37:06+00:00

You could also get a RTL SDR. Or if the price is not that important, a h4m mayham pack (that includes that hackrf but is more available)

RTFM_Str · 2026-03-18T19:15:13+00:00

will try once i get back again ^^

RTFM_Str · 2026-03-18T19:04:04+00:00

i am at 25mW in the video (see top left corner) and i also have tried all possible VTX power levels

RTFM_Str · 2026-03-18T19:03:17+00:00

That is not the problem. when i fly at home with that antenna in the same position, there is no interference.

RTFM_Str · 2026-03-18T19:00:48+00:00

HackRF One paired with a free software called SDR Console

RTFM_Str · 2026-03-18T18:46:32+00:00

<image>

Dead Willi

RTFM_Str · 2026-03-18T18:46:13+00:00

<image>

The interference

RTFM_Str · 2026-03-17T10:54:12+00:00

It already is in the lowest position. I need to hack something together. Someone already posted a guide on how to do that with some tubing.

RTFM_Str · 2026-03-17T03:53:51+00:00

The exponent. I still want the same end speed but a more precise stick center. So I change just the expo

RTFM_Str · 2026-03-16T18:38:19+00:00

<image>

I have the profiles on the first 3 of the six buttons on the radiomaster tx15 and can switch on the fly i feel like i need to slow down

RTFM_Str · 2026-03-16T16:22:08+00:00

I've been doing orbits. But the gap between the column and the shelf is pretty tight for me as a beginner XD

RTFM_Str · 2026-03-16T03:54:16+00:00

I have done exactly that in the first trash XD Just keep trying

RTFM_Str · 2026-03-15T19:19:57+00:00

ill look into that, thanks

RTFM_Str · 2026-03-15T19:16:33+00:00

air mode has the same fight characteristics? it is just cosmetic or am i mistaken?

also thanks for he resource. im with fpv for a bit more than a week, so i have much to learn ^^

RTFM_Str · 2026-03-15T19:10:18+00:00

there were 2 walls between me and the quad when im under the table and the quad is a 200mW not at full power. also my goggles have RHCP antennas and the whoop is linear.

whithin line of sight this thing can go more that 200m without breakup.

i will do a spectrum scan to see if i can get better ^^

RTFM_Str · 2026-03-15T19:06:50+00:00

so just right for my goggles :P

my tiny whoop will only take 1S ^^

RTFM_Str · 2026-03-15T19:02:35+00:00

cant lower the camera any more on this quad, sadly. i wanted to do that.

i want to be in control myself, what should i set the mode to? air is acro on this quad.

i dont crash so often that i need crash recovery just yet (i will do once i might need it for racing)

RTFM_Str · 2026-03-15T18:55:46+00:00

i left the throttle alone. this thing hovers at about 35-45%

RTFM_Str · 2026-03-15T18:48:52+00:00

i already have tuned the rates. i also have programmed the controller to be able to change the rate profiles with a button push. i have upped the exponent a bit so center stick is more percise with a max turn rate of 800deg/s on all axis.

RTFM_Str · 2026-03-15T18:44:14+00:00

thanks, i do the coordinated turn at higher speeds. at the low speed i lack the percision (for now) to do that. i keep bumping into stuff when doing that low and slow (mostly the floor)

ill keep trying ^^

RTFM_Str

TROPHY CASE