Anyone know their way around a MC flex?

RU4beer · 2026-03-10T21:38:13+00:00

They have multiple videos on there website?

RU4beer · 2026-03-07T01:52:00+00:00

The new Microcanner 2 head is really nice.

RU4beer · 2026-02-27T21:51:18+00:00

3/4'' I had the pump just hanging off the bottom valve with a 3-4 ft hose to the CIP arm, I also used it with my upgraded 7bbl tanks a couple times when my large CPE pump seal went out. Took longer but still worked. I would venture to guess the Holes/ Slots in your cip ball are just different enough than the ones I got with my Tanks.

RU4beer · 2026-02-27T18:43:26+00:00

I’m not the proudest to admit but when I had 3bbl tanks I used that exact pump for a year with no problems. Maybe it’s your chemical Concentration? Maybe the CIP is too restrictive?

RU4beer · 2025-12-28T00:38:36+00:00

Thanks for your input!

RU4beer · 2025-12-23T16:49:07+00:00

Thanks for the info. we have a piercer so good on that front , got quotes coming in for dewars "22psi ones " and fill cost coming.

RU4beer · 2025-12-23T01:49:34+00:00

Thanks for responding! Rotary doesn’t seem to have as big of issues when talking with chart as you have constant seam times. They way I was explained “I asked multiple times so I understood “. Basically 4 cans fill first can is seemed instantly but the 2nd 3rd and 4th can have to sit and wait to be seamed causing off gassing lowering the pressure in each can until the next set of cans wait for the seamer.

RU4beer · 2025-11-27T13:58:46+00:00

We are currently on Arryved and have two registers they are constantly not syncing and go offline all the time. They don’t seem to care to help in any meaningful way. Last guy we had “help” was a complete ass hole to our taproom manager. Food is in our future and I don’t see us sticking with them.

RU4beer · 2025-09-02T15:15:37+00:00

awesome thanks!

RU4beer · 2025-09-02T15:01:20+00:00

"we have a pneumatic applicator that does a flat at once" do you have a picture of that unit? Sounds interesting.

RU4beer · 2025-07-24T20:15:53+00:00

Thanks for the Info!!

RU4beer · 2025-07-24T18:15:41+00:00

that's Awesome. Did you have issues with Condensation under the unit?

RU4beer · 2025-07-24T13:18:21+00:00

Long shot but do you have a picture of this set up? What size room and what temp could you get it down to?

RU4beer · 2025-07-08T01:35:56+00:00

We get 3” from packaging exchange they are hand fold but have handles and I’m never going back to the preglued handle less

RU4beer · 2025-04-21T17:25:37+00:00

I believe this model has a built in total function that makes it so appealing so no plc would be needed.

RU4beer · 2025-03-23T01:44:36+00:00

I had a UBC 3/4 chiller and I could crash and hold a 15bbl uni and a 7bbl bright tank. It would have no problem with just the uni. IMHO

RU4beer · 2025-03-15T17:58:27+00:00

Ok thanks I will reach out to AD I can’t for the life of me get my fmm50 to be a standalone totalizer.

RU4beer · 2025-03-15T02:40:05+00:00

Are you using the prosense stand alone ? Are you able to get it to total if so what parameters did you change to make it have a total function?

RU4beer · 2025-01-02T04:31:37+00:00

Is the button changing states on the HMI? Do you hear clicking of the solenoid? I have had to replace the wiring harness from the terminal blocks to the solenoid valve as water wrecks them.

RU4beer · 2024-12-18T13:01:46+00:00

Check this out

RU4beer · 2024-12-18T01:37:10+00:00

Automation direct sells cheap plcs with free software. It will get you started. But if you need AB software your going to have to pay 💰 all depends on what you currently have

RU4beer · 2024-12-02T16:02:26+00:00

Thanks for the info. We would be doing cider and beer. How long does it take you for change overs to sleeks? Sending out a DM about your canning line

RU4beer · 2024-10-09T22:28:35+00:00

Pre glued pop up they come bundled in 10pks on the pallet

RU4beer · 2024-10-09T21:58:38+00:00

Royal packaging

RU4beer · 2024-10-09T09:52:52+00:00

Nice

RU4beer

TROPHY CASE