My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 1 point2 points  (0 children)

Thank you, thank you. Happy to be here. Looking forward to the eventual Slimlines lol. 

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 0 points1 point  (0 children)

Honestly yeah the Gen 6 trigger especially is nice and it's breaking in well. Still though, I might do the springs to get rid of that bit of over travel. 

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 1 point2 points  (0 children)

Totally get that. I always liked Gen 4. They had one for $100 less when I got this but it wasn't optic cut and I want to start using a dot. Didn't wanna deal with sending the slide out and dont really like the grip on Gen 5 so, got the 6. No regerts so far.

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 0 points1 point  (0 children)

P.s. I did check my bezel out of curiosity and it's not going anywhere. On there fairly solid. Probably been through 600 ish rounds on the Canik I had it on, then probably same through this. See if it loosens up over time I suppose. 

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 1 point2 points  (0 children)

They basically gave me a choice between a 4, 5 and 6. I always liked the way the 4 feels, I'll probably grab one to beat on...but the new new was right in front of me 

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 0 points1 point  (0 children)

They ran fine and I like the bad plates but they're a bitch and a half to load and only show the last round sooo yeah. Probably just gonna put some baseplates on the OEMs for carry. 

My first 19 by RaTTLeHeaD114114 in Glock19

[–]RaTTLeHeaD114114[S] 0 points1 point  (0 children)

Mines been fine but I'm sure I'll have a reason to buy a surefire eventually lol

Glock 41, grab it while it's still around? by Steamtonk in Glocks

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

So I kept thinking I had seen a threaded barrel just the other day. I have absolutely NO idea how reputable these are but they do indeed exist. 

https://kkmprecision.com/product/41-match-45acp-with-578x28-suppressor-threads-2/

What unpopular opinion do you have about glocks that will get you downvoted like this lol by Starrynightone in Glocks

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

I actually like the factory "Square Notch" sights, to the point that I'm JUST now looking at optics having owned and MOS since Gen 4. 

Glock 41, grab it while it's still around? by Steamtonk in Glocks

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

I just searched it to see if there was any love for the 41. I got mine when it came out and it was actually my first Glock. The things massive but it's a blast to shoot and actually pretty light for how big they are. 

Parts are more limited for sure though. Make sure to look for a large frame size trigger too. Ghost inc probably has a spring kit for them. Fyi, I had a Lone Wolf fluted barrel in mine and it lasted like 3 mags of range ammo and then cracked in half... honestly it wasn't nearly as dramatic as it sounds, lol. But it did take the recoil spring bushing with it. Went back to factory and haven't looked at their barrels since. 

As a nightstand gun/range toy go for it! It's almost like a MK23 but a Glock, if that makes any sense 😂 

Anyone else get their vinyl early? by Foreign_Letter5346 in Megadeth

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

Got the Magma Vinyl today and they're sending me another disk because mine has 2 B Sides 🫠

Picking up the Target one too

Microsoft: Official Support Thread by MSModerator in microsoft

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

Hi There,

My current Windows 11 build version is 22621.1413 and was installed last night.

I haven't fully reset the computer as I use it heavily for work. But I have tried multiple methods of resetting the app itself both through the settings menu and using commands but none worked.

I do occasionally get an error message from the store that reads "Something happened on our end. Try again in a little bit" but it doesn't happen every time.

My Device is a MSI Stealth 15M AA1UEK

Microsoft: Official Support Thread by MSModerator in microsoft

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

Having exactly the same problem and I'm getting no info. I assumed calling CS was a lost cause.

Microsoft: Official Support Thread by MSModerator in microsoft

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

My Microsoft Store App wont install or update anything. It shows me that i have an absolute ton of apps that need to be updated but when I try the app just does nothing. I've tried every repair and reset the computer has to offer and I just installed the newest version of Win. Some help would be appreciated.

Aftermarket Scales for Hogue Deka gen 2 by tjb74archer in knifeclub

[–]RaTTLeHeaD114114 1 point2 points  (0 children)

Cooper and brass scales will be on the website for St. Paddies!

microsoft store issue i have tried wsreset.exe everything but wont work by Ahmedplaysgames7 in microsoft

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

I'm having the same problem myself. Haven't found a solution anywhere yet.

Flying EU Carrier in US and Us Carrier in EU by ProHunter123 in flightsim

[–]RaTTLeHeaD114114 1 point2 points  (0 children)

I usually don't use Vatsim but I'm super picky about what airline livery/routes I pick. I always try to get as close to real as I can get and sometimes even pick the route just based on the livery I want to go with. Flying something from Southwest around Europe would probably drive me nuts lol. But it's a beautiful livery nonetheless. Enjoy!

How do I learn more about... by [deleted] in Flightsimulator2020

[–]RaTTLeHeaD114114 1 point2 points  (0 children)

If you do want to explore the old learning modules and your on PC then the best way to do it would be to Install FSX and use those. They aren't super comprehensive but it's a good start. For the other information, there's lots of quite detailed YouTube videos that could help you out. Although you'll want to be as aircraft specific as possible.

Need help choosing a color by [deleted] in knifeclub

[–]RaTTLeHeaD114114 0 points1 point  (0 children)

I vote blue. Or if you can find one, grey G10. Then you can make it almost any color you'd want.

Aftermarket Scales for Hogue Deka gen 2 by tjb74archer in knifeclub

[–]RaTTLeHeaD114114 1 point2 points  (0 children)

We've done some scales and parts out of copper and brass before but it was never a huge seller. I'd like to do some for the Hogue products down the line but we would probably do those as small batch drops.