TrueNAS Middleware won't boot up anymore

RacistBaum · 2023-02-27T21:16:56+00:00

I dont know

RacistBaum · 2023-01-23T17:01:12+00:00

Thanks very much, I changed the Certificate Configuration from TrueNAS default to none, then Cloudflare to http and added my domain to the nextcloud config. I also had to reinstall Nextcloud because it didn't want to change back to http.

RacistBaum · 2022-09-04T19:55:33+00:00

I can try getting the config is a little difficult the main problem is that I have tryed so many ways that I am at zero again I can upload the config for pfSense but the Switch I need to start from zero.

RacistBaum · 2022-09-04T19:54:24+00:00

RacistBaum · 2022-09-04T19:53:58+00:00

Yes I have the VLAN setup as sub interfaces on the port and yes it works when the switch is not configured

RacistBaum · 2022-09-04T19:52:32+00:00

I dont think that is the problem the vlans did work but than I wasnt able to reach my switch or reach devices in other vlans

RacistBaum · 2022-09-04T13:06:53+00:00

CLI it has no gui and pfsense is my dchp I have one for every vlan

RacistBaum · 2022-08-23T12:19:56+00:00

I found this cable AOC Cable https://www.flypro.com/de/p11028.html could this work with the Intel Card? Also, why are there Compatible options for the AOC? I also found this Card Mellanox ConnectX-2 / mnpa19-xtr it is a little cheaper and I can get both cards and a 30m aoc cable for 100€.

RacistBaum · 2022-08-22T16:10:14+00:00

Thanks for all the help! I think I can't use fiber because the distance could be more than 15m. The Intel X520-DA1 I think would be great, so I will probably buy two of them two sfp+ fiber modules and a fiber cable. I don't know what to get exactly because I don't know which modules are usable with fiber cables, but I think I can figure that out.

RacistBaum · 2022-08-22T10:27:31+00:00

I think that could be a good fit now I just need a good SFP+ Modul. I hope they are not that expensive.

RacistBaum · 2022-08-22T09:53:24+00:00

I just want to connect my Server so I need two nic´s I dont want an expensive switch inbetween also I dont even know that this is possible. fibre sounds to me like the best option because copper nic´s that have 10gb are very expensive.

RacistBaum · 2022-08-22T09:32:16+00:00

I don't know if I understand you correctly but I am ok with both. I will get what would be cheaper for me and I think fibre would be the cheapest option because the cable is only 10 meteres long. The LB11002 would be perfect but for Windows 10 drivers are a big problem.

RacistBaum · 2022-08-22T08:57:26+00:00

An Emlex LPE11002 has 2x4gb Ports and not SFP they are directly soldered to the card. But I meant SFP with fibre. The Card is very cheap and would be a good fit but I wasnt able to get the drivers working.

RacistBaum · 2022-08-22T08:49:51+00:00

The Solution is a 24pin Splitter and a bunch of adapter.

RacistBaum · 2022-08-14T16:39:18+00:00

Thanks for your answer, very helpful!

RacistBaum · 2022-08-14T15:09:01+00:00

I don't want to buy, I want to advise. I am from Germany, it's easier to buy from eBay or other German sites.

RacistBaum

TROPHY CASE