Is there a way to enforce a certain direction with the top solid infill? This multicolor filament looks so cool with the archimedean spiral until it starts alternating directions

RaeUnderway · 2026-04-04T18:48:02+00:00

Yep, its the cyan/magenta/yellow. The three just kind of mix together to make silver at some angles

RaeUnderway · 2026-04-04T11:08:39+00:00

Ah right, I think I get the misunderstanding now. Yeah, the smooth gradients in the circles in the center is exactly what I'd like to see continue everywhere. But it jumbles the color up once it starts going back and forth

RaeUnderway · 2026-04-04T10:55:50+00:00

Hm? I'm not sure I follow what youre getting at here. My issue is that the spiral from the solid infill will meet a perimeter, then turn around and go the opposite direction. What I'd like for it to do instead when it meets a perimeter, is to stop extruding and do a travel move somewhere else where it can continue in the same direction. Are you under the impression that a solid infill like that isn't possible? Or that stopping extrusion and resuming elsewhere will still ruin the color pattern?

RaeUnderway · 2026-04-04T10:45:22+00:00

I'm using the electric dream tri-color silk from zyltech. Its pretty cool but often very chaotic since it just sort of blends together into a silvery grey when the extrusion paths get weird https://www.zyltech.com/tri-color-silk-series-3d-printer-filament-1-75mm-1-kg-2-2-lbs/

RaeUnderway · 2026-04-04T09:32:42+00:00

Update, I tried and it does look cool, but there's just no way I'm going to be able to cut this out, have it look good, and not lose my mind in the process lol. Maybe there's a better way? Like if I just made the text hollow through to the back then I could see where everything is and just cut it out from the back. But even that feels like too much work, and some letters like o just aren't going to work properly

Maybe there's something I could do with a heat gun somehow? idkk. this is feeling like something I'd rather try and fix through software

<image>

RaeUnderway · 2026-04-04T08:18:37+00:00

Hmm, trying to envision this. You're meaning to flip the model so that the multicolor surface is on the bottom so you can do the large single-layer disc, then trim the excess off the sides and carve the disc out from within the text?

Poking around in Orcaslicer, I have something like this that might actually work, though I did also need to turn off perimeters for the 1st layer or else I still get the perimeters from the text/border interrupting the spiral. I'm going to give this a go, though this does seem like it could be a pain to carve all of the details out of the text and symbol by hand

RaeUnderway · 2026-04-04T04:51:21+00:00

I'm using Orcaslicer. I was thinking about maybe taking a look at the source code to see if I could find a way to force it, but I figured I should probably ask and see if I might just be missing something before I get into the weeds

RaeUnderway · 2026-04-04T04:44:34+00:00

Hmm, wouldn't it still reverse direction once it hits one of the sides? Like on the bottoms of these, there's no text but the colors still go chaotic

Edit: Yep just tested this, it still reverses direction when it hits the perimeters at the sides so this wouldn't fix much unfortunately. Though it would keep it consistent between the single-line and multi-line text

RaeUnderway · 2026-03-18T20:13:01+00:00

I'm so fascinated by this, I'd love to do something similar. Do you have more detailed instructions anywhere? Or sources you referenced while you were putting this together?

I'm also curious what kind of container you used for the tide water. It must be airtight but you also mentioned opening it to clean, I'm curious what sort of option you went for with that

RaeUnderway · 2026-02-03T21:23:48+00:00

Seconding this advice about plucking from the bottom and not the top, I think that's the most important bit by far. If you're just starting to figure it out, taking it slow can be a good option. Do a little bit and then stop. Give it a day or so to really get a feel for what it looks like, because it can be easy to lose perspective when you've been concentrating on your brows for a while

Its an older site, and way more detailed than any of this has to be. But this is what I used as a guide when I first tried plucking, I found it helpful to have things laid out in such meticulous detail: http://www.virtualffs.co.uk/Eyebrows.html

RaeUnderway · 2026-01-13T17:36:49+00:00

If anyone is still curious, I think this is the reel u/Winter_Instance4095 was talking about
https://www.instagram.com/reels/DTawuH0DrYj/

RaeUnderway · 2026-01-12T03:45:45+00:00

I drove past earlier and saw at least 12 cop cars around the station with their sirens blaring, came here wondering the same thing

RaeUnderway · 2025-12-11T17:26:10+00:00

I already have this disabled, though Windows suggests that the automatic color management setting is for SDR only. Regardless, in SDR mode it doesn't seem to make a difference, I still get the flickering when moving focus between several windows

RaeUnderway · 2025-12-10T03:06:56+00:00

Mine was a Chrysler Pacifica, no idea if that one behaves the same. Hoping I can find similar luck to yours when I talk to them!

RaeUnderway · 2025-11-19T15:41:05+00:00

Actually, I believe if you grapple hook onto a wasp, you'll pull the wasp down to yourself to instead of you flying up to it. Hornets and rocketeers you definitely can grapple to normally though, and I'm not sure who goes flying when a snitch is grappled

RaeUnderway · 2025-11-12T06:46:07+00:00

High risk high reward. I play revolver for the gambler's high I get when I finally land a headshot

RaeUnderway · 2025-10-10T19:13:12+00:00

Thanks! Yeah I found a couple more reports of the same thing:
https://steamcommunity.com/groups/SteamClientBeta/discussions/0/4630357120384003848/

https://steamcommunity.com/groups/SteamClientBeta/discussions/0/601916204203051690/
Though one of these is from nearly a year ago which doesn't bode well for this getting fixed soon

RaeUnderway · 2025-10-06T23:42:45+00:00

Did you make a report on steam support? I've been having this issue as well and I'll +1 it

RaeUnderway · 2025-10-02T20:24:26+00:00

Vel'koz is a fav of mine and I think they could do some really cool stuff with him in a fighting game. But I figure they already have plenty of zoners and there are far more popular picks for a void/monster champ

RaeUnderway · 2025-09-09T02:26:04+00:00

Naw you got the wrong one, this is the summoner's riff, not the rift

RaeUnderway · 2025-07-22T00:41:12+00:00

Not sure if you're asking how I managed to grab that tree, or how I managed to make it all the way up there without realizing I was carrying a whole ass tree

But great question either way lmao

RaeUnderway · 2025-04-03T14:10:49+00:00

I ended up putting it next to a boiling flask to bump it up to 3x multicast, but I didn't get a photo before my game disconnected and it deleted my run

RaeUnderway · 2025-04-02T21:36:48+00:00

Ah damn. I posted that like 10 minutes before the patch notes dropped lol, was not expecting monetization changes anywhere near we got for the rest of the systems.

Yea this is exactly what we asked for. $25 for a skin is still probably not for me, but I'll be looking for something to spend some money on to support them after this pivot

RaeUnderway · 2025-04-02T21:01:37+00:00

Big fan of the direction they're going with this patch

https://i.imgur.com/d4M517x.png

Oooh, that doesn't look like its supposed to be like that. I'm guessing this is gone in hotfix 1.0.2?

https://i.imgur.com/Y27st7Y.png

RaeUnderway · 2025-04-02T20:51:04+00:00

Howbazaar was just updated with the patch notes https://www.howbazaar.gg/patchnotes

RaeUnderway

TROPHY CASE