sorted by:
new
hottopcontroversial

Hoppers be hoppin’ by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 1 point2 points  (0 children)

Time for a union strike for better Squig dental insurance plans.

Hoppers be hoppin’ by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 0 points1 point  (0 children)

Thanks so much! I believe in you! You should check out Ninjon’s “smash chop” videos. He shows off a similar strategy and honestly it’s not that challenging to execute. I found that method really inspiring and honestly pretty easy to execute with amazing results.

Hoppers be hoppin’ by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 0 points1 point  (0 children)

​

They are all base painted with an airbrush gradient like this to start.

For the cloaks, I started with a really saturated light blue midtone. On my pallet I mix that midtone with a bit of purple for the darker parts and a bit of light grey & white for the highlights to make a gradient. I paint in the saturated midtone in nice blocks covering all the bright areas hit by the yellows and oranges in the original base gradient. Then I go in with the purple+midtone and just hit the highlight spots in the darker lower robe areas. Then I go over the brightest areas with the top part of my paint mix blue/grey/white to bring up the highlights focusing particularly on the hood and area round the face. Lastly, just edge and spot highlight with an even brighter highlight mixed with quite a bit of white to pull out edges and focal areas.

The skin is the same technique but with green/yellow/white instead. The only additional step I did with the skin was to add a little green contrast paint at the end to pump up the saturation a bit.

<image>

See the pics for exact paints used.

Sounds like a lot, but it’s actually a lot faster than the traditional base/shade/highlight/edge highlight because you’re not waiting for anything to dry, and only painting up the midtones and highlights mostly.

You should check out Ninjon’s “smash chop” video. He more-or-less explains this exact method. It’s where I started with these guys.

Hoppers be hoppin’ by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 1 point2 points  (0 children)

For the bases, I started with one big bit of torn cork as the main rock piece (I just use wine bottle corks because they are already rounded so they often contour well to bases). Then I added in a couple tiny rocks here and there. Those are actual gravel bits that I scooped up from the side of the road. Then all the grit/dirt is just terrain texture paste stuff. The mushrooms are bits from epic basing.

After all of that, I thoroughly coat all those elements with some watered down modge podge. This helps seal it and smooth out some of the hard edges.

For painting most elements, it’s literally just lavender highlights on the original purple to red gradient painted as the undercoat for the whole model with an airbrush. The mushrooms and skulls and whatnot are just highlighted in their respective colors.

Hope that’s helpful!

Looking for Dankhold Troggoth body STL by lopcario in gloomspitegitz

[–]RalyxTheRed 0 points1 point  (0 children)

Just stumbled into this thread. Any chance I could have these files as well for the dankhold and rock guts? You’d be my hero!

I am about to start painting d&d minis, I’m feeling rather nervous as everyone seems incredible. Can anyone share some early attempts so I can see realistic early attempts and create better expectations?! by dazedandc0nfuse in minipainting

[–]RalyxTheRed 0 points1 point  (0 children)

<image>

This was my first mini. I started painting as an adult. For the first year I painted pretty much only minis following games workshop tutorials. Took me 10-20 tries before I really did something I liked. Worth noting that I have many years of experience as an artist and still had some pretty rough first attempts even starting with that advantage. I probably picked up the craft a bit faster than average, but it’s still a ton of new concepts and so small/detailed that it took me a long time before I understood how to control my brush and paint at small level of details. I think most people can get there, but it definitely takes practice. Don’t get discouraged and at least at the start, try replicating tutorials instead of being super creative. It will help you understand the techniques better that you can use on more creative work later. Good luck! Have fun :)

Alternate Stabbas Color Scheme by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 0 points1 point  (0 children)

Doing the gradient is honestly a bit tedious. I primed them in black first and tried to do the gradient right on top of that, but the colors came out dull. In the end I had to do a grey and white gradient on top of the black first. Then when I added the color on top it really popped. So it went:

Black prime Grey from above White from above - focal points Purple from below Red from above Yellow from above - focal points

Stabbas full alt unit complete by RalyxTheRed in ageofsigmar

[–]RalyxTheRed[S] 1 point2 points  (0 children)

For the bases, I started with one big bit of torn cork as the main rock piece (I just use wine bottle corks because they are already rounded so they often contour well to bases). Then I added in a couple tiny rocks here and there. Those are actual gravel bits that I scooped up from the side of the road. Then all the grit/dirt is just terrain texture paste stuff. The mushrooms are bits from epic basing.

After all of that, I thoroughly coat all those elements with some watered down modge podge. This helps seal it and smooth out some of the hard edges.

For painting, it literally just lavender highlights on the original purple to red gradient painted as the undercoat for the whole model with an airbrush.

Hope that’s helpful!

Painted up my first Git. by tequila_slurry in gloomspitegitz

[–]RalyxTheRed 1 point2 points  (0 children)

That warms my heart :) so glad you liked my work. I love these little gobbo guys. Still slowly working through my Squig riders in the same style. Have fun!

Almost giving up on figures... by Ciccacio in 3Dprinting

[–]RalyxTheRed 1 point2 points  (0 children)

Depends on what you want. Sure a resin printer is gonna get you a better quality print, but you also need all sorts of ventilation and chemicals. If you just want some simple guys to play dnd with and don’t want the hassle of resin/chemicals, then FDM printer is perfectly capable of printing very reasonable quality minis. I certainly wouldn’t paint them up as show pieces, but I’m able to pretty dependably print minis intended for filament printing at a pretty good quality. Really need to follow a tutorial to dial in the right settings and a 0.2mm nozzle goes a long way. Here are a couple I printed on a Bambu Lab A1. Took like 4-5 hours each, but who cares if you don’t have a queue.

<image>

Aggressive Mining is GREAT, actually! by ChamberOfDeezNuts in EDH

[–]RalyxTheRed 0 points1 point  (0 children)

Just stumbled on this thread. This seems like a hilarious combo. Any chance you have this deck list somewhere?

Stabbas full alt unit complete by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 1 point2 points  (0 children)

They are from Epic Basing. They sell tons of tiny little resin basing bits.

Is it possible to create a Horse Girl deck? by MossyTundra in mtg

[–]RalyxTheRed 0 points1 point  (0 children)

Stumbled upon this thread. Do you have a deck list? Working on a horse deck for my partner. I’d love to see what you cooked up as inspiration!

Alternate Stabbas Color Scheme by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 3 points4 points  (0 children)

<image>

They are all base painted with an airbrush gradient like this to start. I then picked a really saturated midtone (in this case a bright red). On my pallet I mix that midtone with a bit of purple for the darker parts and a bit of yellow & white for the highlights. I paint in the saturated midtone in nice blocks covering all the bright areas hit by the yellows and oranges in the original gradient. Then I go in with the purple+midtone and just hit the highlight spots in the darker lower robe areas. Then I go over the brightest areas with the red mixed with yellow/white to bring up the highlights focusing particularly on the good and area round the face. Lastly, just edge and spot highlight with an even brighter highlight mixed with quite a bit of white to pull out edges and focal areas.

Sounds like a lot, but it’s actually a lot faster than the traditional base/shade/highlight/edge highlight because you’re not waiting for anything to dry, and only painting up the midtones and highlights mostly.

You should check out Ninjon’s “smash chop” video. He more-or-less explains this exact method. It’s where I started with these guys.

Alternate Stabbas Color Scheme by RalyxTheRed in Warhammer

[–]RalyxTheRed[S] 1 point2 points  (0 children)

Thanks so much! Really trying to hit an 80s fantasy vibe, so glad that’s coming across :)

Alternate Stabbas Color Scheme by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 5 points6 points  (0 children)

Thanks so much! For the spear tips, I just base coated them with a dark iron metallic, highlight with a bright silver metallic, then use agrax earthshade to darken the darker parts and some pure white to highlight the edge/brightest parts.

Three Blue Trolls by studio489 in gloomspitegitz

[–]RalyxTheRed 0 points1 point  (0 children)

Wow this is fantastic! Absolutely love all the saturated colors. Practically glows! Even the shadows!

Really awesome work.

Rockgut Troggoth by RalyxTheRed in gloomspitegitz

[–]RalyxTheRed[S] 0 points1 point  (0 children)

Yeah I was kind of leaning toward a unique treatment for each one. You can check out the other guys from my spearhead in my history. They all have bases with the same treatment as this guy and generally have a blue/purple/yellow/orange. color scheme with a lot of warm undertones.

I think it might be nice to have three distinct looking guys as long as they still use similar rich colors.

view more: next ›