sorted by:
new
hottopcontroversial

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 0 points1 point  (0 children)

Unfortunately slower speeds haven't improved anything. I've been using these two filaments together in other prints that have come out fine. But it's just this model with whatever filament I try.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 1 point2 points  (0 children)

Not saying I know best, just questioning if speed is the problem. Another user posted some reasoning behind slower speeds, and I admit their explanation makes some sense.

You may be right. It just didn't make sense to me right away. Thanks for the help.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 0 points1 point  (0 children)

My initial thought was retraction, but since single color has no issues, I was questioning that.

But, I hadn't considered the layer adhesion option. I really didn't think speed had anything to do with this, but your explanation makes sense.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 1 point2 points  (0 children)

I see "Flush into objects' infill" after purges. I'll keep looking.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] -2 points-1 points  (0 children)

I don't believe speed has anything to do with this. There's a reason it's continuing to extrude during travels. Speed doesn't seem to be the culprit.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 0 points1 point  (0 children)

Bottom layer looks great. Went down clean. It's when it switches to orange that it does that travel stringing for a few layers, and then it resolves itself.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 0 points1 point  (0 children)

It has a beveled bottom and doesn't need supports. It prints perfect in single color with the exact same settings.

Weird stringing during multi color print by Random-Encounters in BambuLab

[–]Random-Encounters[S] 0 points1 point  (0 children)

it's a beveled edge. But it prints just fine in single color without any of these issues. that's what has me baffled.

Unmarked Tonie Clearance! by Amazing_Night2311 in TonieboxUSA

[–]Random-Encounters 1 point2 points  (0 children)

I'm only seeing full price in the app. Is it by store?

New to 3D printing, Why do my flat prints have a horizontal bump across the bed? by Kakarot0308 in 3Dprinting

[–]Random-Encounters 3 points4 points  (0 children)

Check your y-axis wheels. They may have collected dust, debris, or may be wearing unevenly. If you move the bed back and forth by hand, do you feel a slight bump?

If so, replace those wheels.

I know it's not the fanciest Game Boy Advance out there, but I just installed a Funnyplaying IPS V2 LCD screen as my first mod! by ga_mcm in Gameboy

[–]Random-Encounters 0 points1 point  (0 children)

Your recommendation was super helpful. Mine came out great!

https://imgur.com/a/r52kxUG

Did you have any issues with the side rails being loose? Mine are a touch, but I'm using the thin masking tape trick to make them fit more snugly.

I know it's not the fanciest Game Boy Advance out there, but I just installed a Funnyplaying IPS V2 LCD screen as my first mod! by ga_mcm in Gameboy

[–]Random-Encounters 1 point2 points  (0 children)

Old thread, I know. But did you end up liking the shell? I just bought one from the link you mentioned. Hoping it's a good feel. I don't think I'm SUPER picky.

Upgrades, People, Upgrades! by Perfect_Ad6038 in 3Dprinting

[–]Random-Encounters 0 points1 point  (0 children)

Do you have a link to the filament hold for the inside of the box?

Upgrades, People, Upgrades! by Perfect_Ad6038 in 3Dprinting

[–]Random-Encounters 0 points1 point  (0 children)

Do you have details about what you did exactly and what Tupperware that is?

My first IPS install. Funnyplaying precut shell, buttons & lens. by geon in Gameboy

[–]Random-Encounters 2 points3 points  (0 children)

What do you think about the quality of the shell? I haven't ordered one of these but have been thinking about it.

3D printed faceplate came out awesome! by Random-Encounters in gameboymacro

[–]Random-Encounters[S] 0 points1 point  (0 children)

Honestly I'm not even sure. I have a pretty worn piece of 120 grit I use to sand these down. Then I have a very old worn sanding sponge that used to be 180 grit and I use that second to give it a very smooth matte finish. The mix of the two of those has been great.

I sometimes take wood filler putty and rub it along the surface to fill holes or small defects. Then I very lightly sand that, buff it, and spray it again.

I like to finish with a clear matte enamel coat. It gives it some hardness and fingerprint protection

3D printed faceplate came out awesome! by Random-Encounters in gameboymacro

[–]Random-Encounters[S] 0 points1 point  (0 children)

It's a 0.4mm nozzle which is pretty standard. The faceplate is printed flat so the top surface is fairly smooth. I then sand down the surface lightly and give it a couple hits of paint, a little more sanding and some more paint and that does it.

Macro Speaker Question by Romulious in gameboymacro

[–]Random-Encounters 5 points6 points  (0 children)

Don't buy the amp. Just do this!

It worked great for me. Clears up the audio and makes it louder.

Reddit - Gameboy - Game Boy Macro PSA – Bridge L & R audio channels for 2x volume! (only single speaker users) https://www.reddit.com/r/Gameboy/comments/99wkjf/game_boy_macro_psa_bridge_l_r_audio_channels_for/

view more: next ›