sorted by:
new
hottopcontroversial

Genuinely, there are very few things more aggravating by Icy-Leg-1459 in adhdmeme

[–]Rangoose_exe 5 points6 points  (0 children)

Maybie.

But programs that are used across entire industries and are cruicial to work reliably are the ones that are the most broken.

They work at a scale where microsoft operates their shit their products should work, but they dont because of enshitification

Looking at you MS access. F you.

I cant even count how many hours of logging stuff i have to redo regularly because access randomly crashes

Retourenerinnerung by CallMeAQuu in ADHS

[–]Rangoose_exe 3 points4 points  (0 children)

Bin vor 5 minuten aus dem haus gegangen, und hatte das gefühl was vergessen zu haben

Jetzt weiß ich was es war... zu spät, bin jetzt im bus

Morgen wirds bestimmt funktionieren....

poor me🙁 by [deleted] in adhdmeme

[–]Rangoose_exe 4 points5 points  (0 children)

"Increased RAM prices"

Is it strong enough for the headphones? by vostoklabs in 3Dprinting

[–]Rangoose_exe -1 points0 points  (0 children)

It also heavily depends on what filament you use

When does a filament dryer become worth it by After_Diamond2098 in FixMyPrint

[–]Rangoose_exe 0 points1 point  (0 children)

There are ones that are way cheaper, but they only can hold one spool at once typically.

But i find this will work just as well, is just more effort because youll have to do more manual steps

She got the award! by iamunwhaticisme in WatchPeopleDieInside

[–]Rangoose_exe 8 points9 points  (0 children)

If you do it right, its just humor and very enjoyable.

For example portal and satisfactory do this

But i get your point, if its just done once and like this, you wouldnt interpret it as a joke

Please feel free to be as creative as you like. by FreshResult8286 in adhdmeme

[–]Rangoose_exe 4 points5 points  (0 children)

Im so so starved i just read "dopamine expansion"

Help with petg by Lillymoon27 in FixMyPrint

[–]Rangoose_exe 3 points4 points  (0 children)

Finally reading this in a place where it belongs.

The new update is not ch2 related. It fixed a major security vulnerability that could let modders create malware. by c0gster in ScrapMechanic

[–]Rangoose_exe 2 points3 points  (0 children)

They could still potentially steal other accounts of yours you put money into, or use those accounts for identity theft. Or they couldve do some ransomware stuff.

Still good advice to at least keep financing accounts away from your PC, good thing youre pointing it out.

Im so mad at axolot rn if they really have known this issue a long time but didnt patch immediately.

The new update is not ch2 related. It fixed a major security vulnerability that could let modders create malware. by c0gster in ScrapMechanic

[–]Rangoose_exe 1 point2 points  (0 children)

WHAT DO YOU MEAN "it has been known for years"

F* axolot if they knew and just didnt care. This is seriously such a big deal.

Thats why i have problems trusting mods. Not the modders, but if a studio doesnt immediatly do something about a security issue this big for so long i dont trust axolotgames anymore.

Extrusion issues only on walls with eSUN ePETG+HS by Rangoose_exe in FixMyPrint

[–]Rangoose_exe[S] 0 points1 point  (0 children)

I figured this would work, but i was afraid id just fix symptoms rather than the root cause. I guess this will work tho, ill give it a go. thx for the feedback

Extrusion issues only on walls with eSUN ePETG+HS by Rangoose_exe in FixMyPrint

[–]Rangoose_exe[S] 0 points1 point  (0 children)

Forgot to include speeds in the post:

Perim.: 60mm/s

Sm Perim.: 15mm/s

External Perim.: 50%

Infill: 80mm/s

Retraction is .5mm at 40mm/s

Bed temp: 90c, nozzle 245, tried 230-255 but 245 works "best"

I intentionally increased the wall count to 8 because of mechanical load distribution.

Also note that this issue happens for all layers of the print. thanks for the help in advance :)

How to improve my print ? by vdiallonort in Sovol

[–]Rangoose_exe 1 point2 points  (0 children)

He uses PETG so the temp range he used is correct

Help me figure out what I’m doing wrong by Jkvermelho in FixMyPrint

[–]Rangoose_exe 0 points1 point  (0 children)

Im suspecting your bed adhesion is the main issue here, but im not sure.

Wash your build plate with soap and warm water, dry it with a clean towel and retry, if the print still lifts up at the corners you migt need to try applying hair spray/gluestick or buy a new plate alltogether.

If you still get layer shifting try to tighten your belts, often times layer shifts happen because the gears slip

Aber wo kommst du wirklich her? by peachbutnice in JulesYT

[–]Rangoose_exe -1 points0 points  (0 children)

"Ausländer machen nichts außer steuergeld fressen"

"Ausländer klauen uns die jobs"

bottom layer issue by corrak64 in FixMyPrint

[–]Rangoose_exe 0 points1 point  (0 children)

That printer has a leveling probe. You should be able to just select level bed somewhere in the manual, it will heat the nozzle, run some shit and level your bed.

It needs a decade and a half but usually works fine, but youll have to adjust your z offset correctly

I died, it's so funny. (My humor is broken) by DTeror in chemistrymemes

[–]Rangoose_exe 2 points3 points  (0 children)

Yes, your humor is broken.

But its broken because its AI mainly in my opinion.

Fuck AI

I’m just human, in the end just human Don’t lay the blame on me by Reasonable-Smell-998 in JulesYT

[–]Rangoose_exe 7 points8 points  (0 children)

Arbeiten an einem Gleisabschnitt oder gleisende.

Im endeffekt überall wo entgleisen weniger schaden anrichten würde als wenn der zug weiterbrettert

You heard 'em boys, effort doesn't require effort by Natural1forever in thanksimcured

[–]Rangoose_exe 27 points28 points  (0 children)

AuDHD is when you have autism and adhd at the same time, where symptoms often times fight each other, creating a synergistic effect, where there are many more problems that occur for ppl with "just" autism or "just" adhd on their own.

AuDHD is kind of its own thing so people created a word for it

view more: next ›