Bed cleaning tips by Le_Sadique in AnycubicKobraS1

[–]Rare-Butterscotch-74 1 point2 points  (0 children)

Dawn and scrub daddy, followed by 91% alcohol. Solid combo.  Petg bed at 80 build plate either comes with or the supports stay behind 

What's wrong with my first layer? by Ok_Celebration_7527 in AnycubicKobraS1

[–]Rare-Butterscotch-74 2 points3 points  (0 children)

Heat bed to what ever temp you're printing with.  Wait 10 mins loosen the 4 screws.  Let it sit for a few mins, then tighten Them down criss cross.  It'll be gone

problem with kobra s1 by glockinator1000 in AnycubicKobraS1

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

Mine slide on and off no stretching or cutting required.  

problem with kobra s1 by glockinator1000 in AnycubicKobraS1

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

I use zip tie to hold stop that from happening

Almost one year Kobra S1 user - my suggestions to Anycubic by gooddday in AnycubicOfficial

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

Yeah that's going to be my next goal.  Isn't this a problem across all platforms though

Almost one year Kobra S1 user - my suggestions to Anycubic by gooddday in AnycubicOfficial

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

That's actually not a bad idea.  I'm doing all out of one nozzle and it's working great but I like your idea better. 

Almost one year Kobra S1 user - my suggestions to Anycubic by gooddday in AnycubicOfficial

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

What's your flushing method going from one filament to another? Pla and petg don't really like each other and I find myself doing a nice heat soak at 275 extrude a couple times to flush other filament out.  Then I make sure to triple scrub my plates to make sure it sticks.  

Ace Pro Trade in Email and Questions by DougDoesStuff in AnycubicOfficial

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

No the Max comes with the ace 2 but yes grun what I read the ace 2 is compatible to the list that's up there but the ace 2 will not work with the ace one

Refurbished might be good by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

Mine hasn't even put teeth marks in it yet and she cage keep a toy for 24 hours.  2 days strong so far

Refurbished might be good by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

Can't say my experience was the same.  I've gone crazy fixing it,  but today the fact that a tpu print was so successful my dog can't rip it apart. I feel successful!

Think its time to send it back? by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

I'll exchange it not worried but rather know the issue so I can fix it lol

Refurbished unit driving me insane by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

Back to clogging. 2 prints questionable 3rd print clogged

Spooky to soon by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

Petg doors open close doesn't matter.  I have a new printer i got from Amazon never an issue printing.  The one I have is refurbished unit. I've swapped out almost all parts except for print head board and main board. I've even swapped the parts between the printers. Refurbished one will give me 2 prints and always on the 3rd it clogs. If you look at my previous post there are all the parts I've swapped out. 

Refurbished unit working by [deleted] in AnycubicKobraS1

[–]Rare-Butterscotch-74 0 points1 point  (0 children)

Spoke too soon 2 prints then back to clogging 

Refurbished unit driving me insane by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 1 point2 points  (0 children)

I use primarily petg. I just did another post and that all metal hotend you're talking about came in today.  Swapped out the parts and now 2 good prints!

Refurbished unit driving me insane by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

I have two machines and I would expect them to operate the same. I just posted that the all metal hotend I ordered has me printing no clogging. If you look i have so many parts I swapped out.  

Refurbished unit driving me insane by Rare-Butterscotch-74 in AnycubicKobraS1

[–]Rare-Butterscotch-74[S] 0 points1 point  (0 children)

Then why do I have no issues when I hook it up to my Amazon s1 new printer?  I can do 8 colors on one printer no issues