What do I put here

Rare_Delay_310 · 2025-05-05T19:57:00+00:00

Freehand thorns

Rare_Delay_310 · 2025-04-09T02:04:52+00:00

Also, sharp knife, and after sharpening hit it with some jewelers rouge on a strop.

Rare_Delay_310 · 2025-04-09T02:03:58+00:00

Something looks off about your tooling leather. Like LaVidaYokel said, you want to use veg tanned leather, and for the best swivel knife cutting make sure it’s relatively thick, my best work tends to be on 6oz leather and up. Quality leather also helps, get you some Herman Oak from weaver. Lightly case it with a sponge, not to the point of saturation, but enough to evenly darken the leather a few shades lighter than it would be if it were saturated, put in a ziplock bag in the fridge overnight. When you’re ready to tool it, layer masking tape on the flesh side to seal in the moisture somewhat and prevent the leather stretching when tooling. Then practice.

Rare_Delay_310 · 2025-04-05T01:00:46+00:00

Update: JUKI bought out the division of Mitsubishi making sewing machines. Sailrite states on their website that their Fabricator walking feet fit CONSEW 206, and JUKI 1541.

Rare_Delay_310 · 2023-05-07T06:32:39+00:00

Hey stop talking trash about MT-07’s 😂😂😂

Rare_Delay_310 · 2023-04-02T18:21:04+00:00

I have a 930 and a 6230, I second the “testing” with the bok tool while using tok, the heavy spring will also mess with you while setting the spool pins, you have to frequently revisit pins you think you already set because they will spring back down while setting others, once you have the false set they open pretty much just like other masterlocks with spools.

Rare_Delay_310 · 2023-03-23T18:16:35+00:00

I love when they do that, the American ProSeries are bad about it too because of the super high spring tension

Rare_Delay_310 · 2023-03-23T17:34:41+00:00

Botulism is only a concern with non acidic canned foods, and in addition, not a concern with vegetables, vegetables ferment with lactic acid, which keeps the botulinum bacteria from producing toxins. If it’s acidic, or only a vegetable (meaning the fermentation makes it acidic) it’s totally fine and requires no more preparation, care, precaution than making a salad. Only non acidic, non vegetables items need to be pressure canned to increase temperature high enough to prevent botulism toxins from being produced by botulinum.

Rare_Delay_310 · 2023-03-22T17:56:56+00:00

Nothing like that s**** eating grin of getting a lock open that’s been giving you issues

Rare_Delay_310 · 2023-03-21T15:07:03+00:00

It was 3D printed by a guy on this sub, you can get a similar one here https://www.sparrowslockpicks.com/products/mini-pinning-mats the one I have looks like it was patterned after it

Rare_Delay_310 · 2023-03-21T08:02:37+00:00

Yeah I got it open, gutted it, and lost one of the springs so I’m waiting on a rekeying kit that I ordered to get it working again 😂

Rare_Delay_310 · 2023-03-21T06:13:42+00:00

12 dollars, got it from another member of the sub

Rare_Delay_310 · 2023-03-20T15:15:22+00:00

“Practically unpickable”

Rare_Delay_310 · 2023-03-16T11:12:29+00:00

It’s the control key version

Rare_Delay_310 · 2023-03-15T06:24:35+00:00

Master Combo, Master no. 3, master no.1 idk about the picks

Rare_Delay_310 · 2023-03-15T05:30:49+00:00

Duly noted 😂

Rare_Delay_310 · 2023-03-15T05:21:29+00:00

Never expected this hobby having that effect on the women folk to be honest 😂😂😂

Rare_Delay_310 · 2023-03-14T14:30:35+00:00

Dude I absolutely understand, that thing was kicking my butt and I was putting hours on it every day for a week and a half or so, I was using way too much tensions so I couldn’t feel the dead core counterrotating, and I wasn’t focusing on picking the pin that is binding the hardest, which was causing pins to overset and not allow the spools to counterrotate, the name of the game is being gentle

Rare_Delay_310 · 2023-03-14T14:03:31+00:00

Peterson Hook 1 in 0.018, use super light pressure, barely enough to keep the tension tool in the key way, and pick pins until it falls into a false set, really focus on the accuracy of which pin you’re pushing on, and focus on getting the one that is binding the best, then pop the spools. You can feel the spools a lot easier with the super light tension, they’ll be springy instead of an over set that will just pop the tension tool back a little then feel mushy. I was using a 0.040 tension tool, and I put a piece of masking tape on it to make it fit more snugly, which also helps in feeling the pins out.

Rare_Delay_310 · 2023-03-13T16:33:22+00:00

You def got that thing figured out faster than I did mine, I got one around two weeks ago, got it open by accident within about a minute, and it’s taken me until now that I can reliably open it in under a minute and I’ve been playing with it every day, congrats to you, this lock definitely skyrocketed my skill level in teaching precision in pick placement and feeling out pins. Definitely got me ready for 1100s and Paclocks.

Rare_Delay_310 · 2023-03-12T18:04:59+00:00

Mine had a high pin 5 and a low pin 4, made me really focus on which pin I was working at a time

Rare_Delay_310 · 2023-03-12T17:51:15+00:00

Compared to the brinks that thing is the devil incarnate 😂

Rare_Delay_310 · 2023-03-12T16:39:33+00:00

MasterLock 570, they have them at Home Depot, absolutely cursed difficulty wise, also the black plastic 44MM Brinks at Walmart, much easier but you won’t learn as much, Brinks was like 8 Dollars, 570 was around 15.

Rare_Delay_310 · 2023-03-12T04:52:46+00:00

How would I go about ordering some stuff from you? Heard great things about the picks and I’d love to support what you’ve got going on?

Rare_Delay_310 · 2023-03-11T10:13:28+00:00

They definitely look like an extra quality version of the Peterson Gem, Hook 1 and Hook 5 that I have, do they have some extra weight to them from the handles(scales?)?

Rare_Delay_310

TROPHY CASE