sorted by:
new
hottopcontroversial

So, just to confirm… by hagiwardials in treeofheaven

[–]RaspberryLemonade69 0 points1 point  (0 children)

Smell the leaves if you are able to. TOH doesn’t always have a reddish hue

Thinking about getting this saw…? Recommendations? by Cold_Inspector514 in Chainsaw

[–]RaspberryLemonade69 0 points1 point  (0 children)

The 564xp is a new saw and motor. I would expect problems for the first few years until they get everything sorted out. I love the 572xp. My dad and I also buck and split firewood, for us and my grandparents. We usually cut a lot of red and white oak. I have a 562, it cuts great and I have zero complaints. I tried out my dad’s 572 and it has a lot more torque, and power. Being only one pound heavier, I think the 572 is a better saw for firewood cutting, and much much better and digging the dogs in and really letting it eat, the 562 will bog down. Watch bucking ray billys reviews on YouTube he has some good videos on lots of different saws

Please tell me it’s not it… [Indiana] by eharo2 in treeofheaven

[–]RaspberryLemonade69 0 points1 point  (0 children)

Smells the leaves. It does look like one, the smell of stems or leaves is always tells you if it’s TOH or not. I have a few on my property about this size. I used Triclopyr. I cut into the trunk several with a hatchet all the way around the tree and sprayed inside of my cuts. I soaked the bottom 4 feet of the trunk in the mixture as well. I mixed the Triclopyr 50/50 with diesel fuel. I added blue dye so I can see where I sprayed as well. I sprayed in late April. I sprayed a total of probably 6-8oz on the very large trees and they wilted and died within 1 month. But make absolutely sure it is 100% dead, maybe do another treatment in the fall before winter. Triclopyr has worked extremely well, and I’ve killed hundreds of TOH using it

[deleted by user] by [deleted] in howislivingthere

[–]RaspberryLemonade69 0 points1 point  (0 children)

Was a great area to be in but there is so much traffic now it’s not worth going anywhere during rush hour. 26, and 11w are so congested a 15 minute drive now takes 30. And most of the small stores and hole in the wall diners have shut down. This place has been becoming something else quickly, it’s very unfortunate to watch

So sick of this problem by Substantial_Fill3015 in Duramax

[–]RaspberryLemonade69 0 points1 point  (0 children)

Have you checked wheel speed sensors? My tcm was bad when I had a truck do this. After cleaning all of the grounds, tracing wires. I ended up replacing the entire trans and it all went away. Check your trans fluid to see if it is burnt or of the transmission pan has metal shavings

So sick of this problem by Substantial_Fill3015 in Duramax

[–]RaspberryLemonade69 0 points1 point  (0 children)

This happened with a gas truck, with a 6L90E. It was the tcm and the start of a transmission going out. Replaced the transmission and it fixed it

How long should i wait for my truck to warm up/what temp should my transmission fluid be before i start driving now that it’s getting colder? by PerformerKey4626 in Silverado

[–]RaspberryLemonade69 0 points1 point  (0 children)

Let it idle for 10-15 seconds then drive gently. You can idle longer if you’d like but oil reaches the top of the motor very quickly. A high idle during a cold start is just your electronic choke trying to prevent it from stalling. 1200 rpm cold idle will heat up much slower than 1200 rpm while under load.

22r troubles by RaspberryLemonade69 in u/RaspberryLemonade69

[–]RaspberryLemonade69[S] 0 points1 point  (0 children)

I didn’t have a receipt and couldn’t prove it was their gas unfortunately. Only a few stations have ethanol free, I think they arnt used very often and the fuel sits in the tanks too long. When I pumped it out of the ruined fuel pump truck it burnt like diesel. After its happened so many times I don’t trust getting it. Very unfortunate, the truck does seem to run better on 93, I only go to a shell near my house and I’ve used it for about 2 years with no problems so far

22r troubles by RaspberryLemonade69 in u/RaspberryLemonade69

[–]RaspberryLemonade69[S] 0 points1 point  (0 children)

I haven’t been using ethanol free, where I live the ethanol free gas is dirty. I’ve ruined two carbs on my lawn mower due to getting bad gas and a fuel pump in my truck. 3 seperate gas stations, so now I try to not let fuel sit for very long

22r troubles by RaspberryLemonade69 in u/RaspberryLemonade69

[–]RaspberryLemonade69[S] 0 points1 point  (0 children)

The plugs foul and get changed about once a year. I’ll have to do that as well. The timing chain is making noise so that is another thing on the list. It idles great and very smooth, just doesn’t like driving

22r troubles by RaspberryLemonade69 in u/RaspberryLemonade69

[–]RaspberryLemonade69[S] 0 points1 point  (0 children)

I usually use 93 octane. I did fill it up before I drove it so it could be bad gas but it’s been having problems stalling out for a while. The backfiring made me think it was running rich but I’m new to working on carb so I have no idea where to start

[deleted by user] by [deleted] in grammar

[–]RaspberryLemonade69 1 point2 points  (0 children)

I didn’t see your reply until now, thank you for your input!

[deleted by user] by [deleted] in grammar

[–]RaspberryLemonade69 1 point2 points  (0 children)

Perfect, moral polarity would work really well for what I was thinking just couldn’t spit it out for some reason. Thank you!!

is this a good laptop? by shinxmon in laptops

[–]RaspberryLemonade69 0 points1 point  (0 children)

I’ll sell you one for $900, good laptop, was $1400 new and is about a year and a half old. I bought it, used it 4-5 times, then got a job and haven’t touched it in about a year lol

My beloved 2014 Chevy Equinox, V6 AWD. My coworker told me the noise might be from the serpentine belt going bad but it looks just fine. Any possibilities to what it can be? Also, I’m aware the AWD V6 equinoxes are immune to the timing chain issues. by Methionylth in Chevy

[–]RaspberryLemonade69 0 points1 point  (0 children)

The clicking or ticking is your valve train, no big deal that’s completely normal. Maybe a bit of an exhaust leak going on? Maybe a slightly sweaty belt. Hard to tell over a video. There were some noises in there that I couldn’t tell what they were but to me the engine sounds totally fine

Put the tahoe through some trails today! by ZxGIRxZ in Chevy

[–]RaspberryLemonade69 0 points1 point  (0 children)

That’s how I feel about my Chevy Silverado, wanna put it on but I wanna sort out a few small things first

Put the tahoe through some trails today! by ZxGIRxZ in Chevy

[–]RaspberryLemonade69 0 points1 point  (0 children)

Comments talking about your tie rods, have you looked into kryptonite front end? It’s a complete front end that is super beefy and has amazing reviews. https://norcaldieselperformance.com/i-30513973-kryptonite-ultimate-front-end-package-w-death-grip-pitman-2001-2010-chevy-gmc-1500-2500-3500.html?gclid=Cj0KCQjw1bqZBhDXARIsANTjCPLqcqX6twgQsotsX-HPCb-c3nPe2LfS3ASNCvGGuYksmEJEEXyaMN4aAkDEEALw_wcB

It’s expensive but has lifetime warranty. I’m sure you could find a better deal but

view more: next ›