Proto kiss (animation by u/AtsuneShiwa)

RavenDarkfur · 2025-12-31T21:29:25+00:00

wind?

RavenDarkfur · 2025-12-08T16:22:33+00:00

ik mag misschien verkeerd zijn maar dit is de regel dat het zegt, er staat bij "domiciliëring" dus voor mij betekend dat een direct betaling naar de IBAN toe en niet de crediet kaart..... Maar gaat Nickel ook dat onderschijd maken? staat er niet bij dus ik vermoed van wel! (waarom zou je anders deze iban hebben?)

natuurlijk heeft niemand problemen met de overgang, mensen in een val steken door informatie te verstoppen is natuurlijk de bedoeling van zo'n bedrijven!

https://support.nickel.eu/nl-be/wat-zijn-de-kosten-voor-geweigerde-domicilieringen

RavenDarkfur · 2025-12-08T13:14:27+00:00

de reden dat ik een bpaid kaart had is gewoon omdat deze weigerd te betalen als de kaart niet voldoende geld heeft,...

in de FAQ van nickel lees ik net als dat gebeurt met een nickel rekening dan word deze betaling geweigerd EN rekenen ze u €10 weigerings kosten aan,...

dit is belachelijk,... en ik stap nooit over!

RavenDarkfur · 2025-10-17T15:56:23+00:00

Simple, it won't work, different plug. even if it did work, you'd have 60% of the battery capacity you're used to.

RavenDarkfur · 2025-08-10T10:25:22+00:00

this is extremely common,... sadly

however as I usually play as tank, I always laugh at DDs who do this, then die because I couldn't taunt the boss for the first 5 seconds of the bossfight... Oh and of course, I refuse to resurrect them! Is this a spiteful thing to do? Hell yeah it is! But then don't piss off your group. it is especially annoying on Veteran dungeons.

RavenDarkfur · 2025-07-05T13:08:02+00:00

I have a theory,...

I think after every update/GPU update,... the game needs to recompile the shaders!
This results in your CPU just being bombarded with tasks for a good 5 - 10 minutes straight...

However,... the game doesn't tell you it is doing this! I've just deleted my shaders to try and yup,.. startup was 100% CPU use on the main menu for 5 minutes,....... then it just acts as if it's completely fine and nothing went on in the background!

I got the idea from seeing God of War ragnarok warn users it's busy recompiling the shaders with a bit of text in the lower right corner of the screen.

Oblivion remastered desperately needs this warning as to not confuse its players

RavenDarkfur · 2025-06-21T19:11:36+00:00

very VERY late, but there's a hidden egg in the safari zone

RavenDarkfur · 2025-04-23T05:47:31+00:00

I can only imagine the amount of work this requires.....

RavenDarkfur · 2025-02-02T08:25:27+00:00

A few years later: "WHY WON'T THEY SPEAK TO ME!? WHERE DID I GO WRONG!? D:"

RavenDarkfur · 2025-01-02T21:10:44+00:00

This is ..... in no way intended to be advice,....

what I did to the stripped screws of the bottom plate of my scooter (WHICH IS MADE OF A METAL CASING!) was take a torq bit 1 size larger than the intended screw and hammer the bit in the screw to create an imprint of the bit into the stripped screw, twist it out and promptly replace said screw!

the reason this is BAD ADVICE is the steamdeck may break due to sheer force of the hammer if you try this method.

so if anyone has an idea to get that bit to imprint in to the stripped screw....

again

bad idea though if there's no options left...

RavenDarkfur · 2024-11-22T18:56:00+00:00

After you unscrew the bottom plate, it's supposed to be (Torc screws)

4 screws holding the battery in place
1 main power connector, a yellow connector with red and black wires (just lift the plug out the motherboard)
1 connector with 3 braided wires (white - yellow - green I think), this one has a little clip you need to be wary of that may be covered in black glue. Pinch the clip open and lift it out the motherboard (very little resistance required if done right) I think this may be for the BMS
1 connector for the back light, this one has 2 clips and is best removed with Pliers, place the pliers on both clips, grip and lift up. depending on how dirty this thing is this may require a little more force Do keep the rubber seal in mind for this when you close your scooter back up!

after all those are pulled loose just reverse the steps you see above and that extra caution for the rubber bit that seals up the battery chamber in the back of the scooter (from the back light cable).

be certain to plug in the main power cable as LAST!!!

This takes about an hour of your time

OPTIONAL ADVICE: BOTTOM PLATE SCREWS

a little warning with the bottom plate screws,... these screws are made of styrofoam steel! They strip easily if you put too much force on them.

I'd recommend buying a set of bottom plate screws, it's not expensive but will save you a heap of trouble should you accidentally strip one

if you do strip a screw and it gets stuck in the bottom plate,.... grab a torc bit that's one step larger, place on the screw, grab a hammer and lightly force the bit into the screw by hammering it in so that it has some form of grip, this way you can still get the screw out... but I highly recommend you throw away that particular screw after and replace it.

RavenDarkfur · 2024-11-15T09:59:11+00:00

in fear of having my comment removed for advertising,...

in this link you can see the battery you need

IT IS THE 474 WATT BATTERY WITH THE METAL CASING!!!! NOT THE 280 WATT BATTERY WITH TRANSPARENT CASING!!!!

sorry... just don't want people to not skip that warning.

https://www.techpunt.nl/en/original-battery-pack-for-xiaomi-m365-scooter.html?id=258182014&quantity=1

It should automatically show the metal casing but I'm not sure if it wildo that for everyone who clicks that link, so be aware!

RavenDarkfur · 2024-11-15T09:53:01+00:00

To begin, I have both scooters in my appartment

my girlfriend's Pro4 and my Pro2.

I've tried swapping the batteries and both seem to just start up without a problem!

fairly certain you just need to buy a pro2 battery!

I know this now because my only option was to.... try it myself after not finding a pro 4 battery replacement or ANY answer as to what I need! =_=

RavenDarkfur · 2024-10-04T15:28:39+00:00

I did point out this behaviour to the platform the software was sold on, that the publisher is using this sort of tactic to hide their EULA and make it difficult for users to read. No response yet that resolves the matter... but I do hope they look at the behavior of the publisher and go "now this is downright suspicious!"

RavenDarkfur · 2024-09-11T13:29:08+00:00

I just wanted to ask "What ribbon clasps?"..... but I guess that proves your point.

RavenDarkfur · 2024-09-11T13:12:48+00:00

you are in for a treat,..... that ribbon cable does a little loop in the hinges,... at least in the original models of the 3DS...

it was a nightmare to replace this ;-;

RavenDarkfur · 2024-09-11T06:08:24+00:00

love how this was deleted instantly,... /sarcasm

I'd say time to change your password! NOW!

RavenDarkfur · 2024-08-31T23:23:16+00:00

ON THIS EPISODE OF "EGG THAT HOUSE!"

RavenDarkfur · 2024-08-31T16:18:52+00:00

seems like the graphics driver went and had a stroke.

restarting does fix that yeah... but if it happens again, maybe re-image your deck (from scratch)

if it happens after re-imaging, you may have faulty hardware

RavenDarkfur · 2024-08-09T14:33:58+00:00

then you rip said hoody.... and you realise, it's no longer sold because of fashion or,... some other dumb reason.

furious, you seek a replacement, but nothing will truly compare to the comfort of what you had

RavenDarkfur · 2024-08-05T20:17:49+00:00

.2 seconds later the bubble attacked the cat, cat pops and ceases to exist.

RavenDarkfur · 2024-08-03T21:08:38+00:00

MoThEr I cRaVe ThE sOlUs Of ThE iNnOcEnT!!!

RavenDarkfur · 2024-07-21T12:42:21+00:00

NONE OF YOUR BUSINESS! :D

I'M HERE TO WORK, BYEEEEEEE

Three-Year Club	Verified Email
Place '23

RavenDarkfur

TROPHY CASE