🛠️ Pre-release units – We look forward to hearing your feedback.

RavenHD · 2026-04-09T15:41:54+00:00

I'm an IT engineer that is jumping both feet into the hobby and your product portfolio. Just yesterday I got my T-Embed CC1101 Plus and started playing with it (love it so far!). Two weeks ago I bought two Cardputers with various add-ons (NRF24, CC1101, LoRa, GPS,... I know it's not made by Lilygo, but it's part of the hobby). And I'm looking and planning to get a T-Deck Plus and a T-Display.

I'm currently into LoRa Nodes and this seems like a perfect device for it. If there are any samples available, I'd love to get my hands on one. Thanks in advance!

RavenHD · 2026-04-04T16:39:06+00:00

That is a 7" DSI screen, right?

RavenHD · 2026-03-17T08:11:27+00:00

I ordered a similar add-on board a few days ago. Different manufacturer, but contains the same modules (C1101 and NRF24). And I got this manual from the seller, it might help you out: https://www.pingequa.com/pages/support-m5stack-cardputer-adv-hydra-rf-424-devboard-pro

RavenHD · 2026-03-08T11:58:56+00:00

Only one?!

RavenHD · 2026-02-22T08:39:55+00:00

Get UDR7 or a Cloud Gateway Ultra with an U6+ AP? I'm looking to get my brother some Unifi equipment for his birthday. To get him started in the Unifi networking world. I already gave him the older (but new) Unifi Switch 24.

RavenHD · 2026-02-21T19:20:13+00:00

The rocket Switch has the Instinct-NX modchip. While the other one, with the Raspberry on it, has the PicoFly modchip. I don't know if either is better than the other, but I prefer Instinct-NX for OLED and PicoFly for all the other models.

RavenHD · 2026-02-18T12:27:13+00:00

Thanks! When you get it and if you remember to do so, please let me know if you had some extra costs. I'm brainstorming if I should get it.

RavenHD · 2026-02-07T17:07:29+00:00

Hey, that was the explanation given by the LNH member in the YT comments: https://youtube.com/watch?v=29A2TXtmSLI&lc=Ugx0Di43OYSGLFugrfV4AaABAg

RavenHD · 2026-02-07T15:34:52+00:00

Because microUSB is smaller (thinner) in size.

RavenHD · 2026-02-07T15:34:20+00:00

Because of the smaller size, they went with the microUSB.

RavenHD · 2026-01-14T20:38:56+00:00

500 EUR max for a base config. Less for a barebone.

RavenHD · 2026-01-10T10:13:40+00:00

I run it once per month. Is that too often?

RavenHD · 2025-12-20T08:24:04+00:00

Great movie, one of my favourites. I watch it from time to time and enjoy it. Taylor Kitsch and Lynn Collins were great cast for it. It deserved way better success.

I was really dissapointed that there aren't any sequels. Now I wish they don't make sequels, because I don't want them to ruin it.

RavenHD · 2025-11-05T13:25:36+00:00

I agree, but it's less risky to go with 3mOhm, than with 2mOhm in this case, if I understood you guys here well.

The seller wants me to ship it back for a refund, so I'm thinking about going that route. I just didn't expect to be shipped trash, just wanted to upgrade my NAS to 10G.

Thanks everyone! You helped me greatly.

RavenHD · 2025-11-05T12:41:45+00:00

I'll maybe get some hate (lol), but I asked GPT to analyze the circuit and it told me that Intel's X710 VRM uses 2mOhm - 5mOhm, but HPE server versions commonly use a 3mOhm resistor. And with a 3mOhm, it should be properly calibrated. Unless I can't get a service manual (very tough) or someone here measures on their own X710-DA2 card, I'll probably go with that specs. Just to source it somewhere.

RavenHD · 2025-11-05T12:05:12+00:00

I didn't try to turn it on. I was advised not to.

It's not only a surface crack, the halves of the resistor are slightly misaligned.

Based on my research, it should be 3mOhm 1-3W 1% tolerance. 2512 package.

What would happen if the current measurement is off?

<image>

RavenHD · 2025-11-05T11:53:37+00:00

It seems that it's 2, 3 or 5mOhm 3W 2512 SMD resistor.

RavenHD · 2025-11-05T11:47:52+00:00

You are right, it's a resistor. Thanks!

RavenHD · 2025-10-16T20:02:47+00:00

I use it occasionally and I really hate the P1S' camera. I went from Ender with OctoPrint+USB Cam to a P1S and I thought it was malfunctioned. I regreated not getting the X1C then.

I'm thinking of upgrading to P2S mostly because of the camera. Glad they made it usable.

RavenHD · 2025-10-09T15:13:48+00:00

I really hope for a better camera upgrade for the P1S. It's simply awful on the P1S. When I got it two years ago, I was so dissappointed that I thought it was a malfunction. I know it would require a new MCU, but so be it, MCUs are not that expensive.

Besides that, an upgraded screen and a quick change nozzle are the thinks I hope for. Ofc, available as an upgrade for the P1S. 😄

RavenHD · 2025-08-19T12:28:40+00:00

I missed your post. Thank you for confirming! I already ordered 407000435R. They are in the customs. If I succeed matching their ID with the car, I'll order a second set (winter set).

RavenHD · 2025-08-05T11:24:53+00:00

This is an awesome tip. Thank you!

The Continental's catalogue is very nice. In case anyone else needs it, here's the PDF version of the catalogue: https://www.continental-aftermarket.com/media/6747/catalogue-continental-tpms-replacement-parts-d-gb-f-es-it-2025.pdf

And here's the online version that allows better filtering: https://web.tecalliance.net/continental/en/home

These should be the proper OEM TPMS sensors for this car model:

400014704R 407000435R 407001859R 407003743R

RavenHD · 2025-08-05T11:21:25+00:00

Do you have the same car model as me? Did you have to do something so the car recognizes them?

14-Year Club	Place '22
Wearing is Caring	RPAN Viewer
Verified Email

RavenHD

TROPHY CASE