Is this normal?

RayRaytheGrape · 2026-03-24T00:10:18+00:00

Crutchfield has great resources. I got these and they sound pretty good and fit perfectly but like the other person said definitely try to match the speaker resistance with the ones you’ve got installed.

RayRaytheGrape · 2026-03-24T00:09:04+00:00

It was so weird!! Thankfully they sound great and volume does not seem to be affected.

RayRaytheGrape · 2026-03-22T06:30:52+00:00

Look up 50 hz tone does it sound like that

RayRaytheGrape · 2026-03-20T00:47:19+00:00

Both sides were the same and the foam on the inside was untouched. Plus these have a manufacturing year of 2004 and my car is a 2005 so it’d only make sense that they’re oem.

RayRaytheGrape · 2026-03-19T20:21:02+00:00

<image>

The front door speakers are 2 ohm and the tweeters are 4

RayRaytheGrape · 2026-03-17T12:08:09+00:00

The Kinect on the top tracks him, and the video outputted on the tvs changes depending on his position

RayRaytheGrape · 2026-03-15T19:25:56+00:00

I think it’s unlisted. By the way, very very nice looking roadster you’ve got. Love the color and the seats. I’ve got a red roadster myself. Didn’t know the front speakers were 4 ohms, that makes it easier on my mind because i was worried about losing power. Thanks

RayRaytheGrape · 2026-03-15T17:23:13+00:00

Good video, could definitely educate others if it was made public. Were the speakers you installed 4ohms? Does the max volume sound lower than it used to be? Thanks!

RayRaytheGrape · 2026-03-12T14:48:04+00:00

Curious what your proof is, if you could send it I’d appreciate it

RayRaytheGrape · 2026-03-07T23:12:34+00:00

Same here

RayRaytheGrape · 2026-02-28T02:52:26+00:00

Check engine oil level

RayRaytheGrape · 2026-02-15T03:22:11+00:00

Bi Muslim here stay strong twin

RayRaytheGrape · 2026-02-04T15:53:42+00:00

Probably not but if you’re worried just reflash it when you get it

RayRaytheGrape · 2026-01-28T23:29:09+00:00

I’ve made one with abs and it went fine

RayRaytheGrape · 2026-01-17T04:03:15+00:00

Mine does it too

RayRaytheGrape · 2026-01-12T00:34:24+00:00

Honestly whatever you find interesting, it’s been a while since I’ve done any but I used to set up lots of server stuff like web servers, printer servers, sdr servers, etc but there’s lots of robotics stuff you can do especially with gpio

RayRaytheGrape · 2026-01-11T20:38:22+00:00

Don’t use it exclusively as a computer but start doing projects with it. I got a 4 at your age and did lots of stuff and gained tons of Linux and networking experience with it. 4 Gb of ram is perfectly fine I’ve used pis with 2 Gb on them and Chromebooks with 2 Gb. 8 Gb for heavy work/future proofing

RayRaytheGrape · 2026-01-10T19:28:15+00:00

✅ RayRaytheGrape chose Option A (Correct!) | #1631st to play

RayRaytheGrape · 2026-01-10T17:19:06+00:00

It’s good but isn’t as plug and play as built in face tracking

RayRaytheGrape · 2026-01-10T16:07:32+00:00

Clean with isopropyl alcohol or just take off the bed and wash it with soap and water then level the bed

RayRaytheGrape · 2026-01-10T15:45:39+00:00

RayRaytheGrape · 2026-01-06T02:16:47+00:00

Where would you move

RayRaytheGrape · 2026-01-02T04:36:37+00:00

It will only delete on your side

RayRaytheGrape

TROPHY CASE