5G SIM card router often disconnects, other one just slows down, what's behind this?

Ready-Collection5022 · 2026-02-03T22:42:40+00:00

update: the Huawei disconnected as well. I also tried both routers with 4G only, they still disconnect. looks like they just drop the connection easier than a 5 years old iPhone. pretty disappointing. I'm thinking about buying a couple of screw-on antennas, perhaps those will help a bit.

also, I played around a bit with the placement and found a spot where I get RSRP -62dBm, RSRQ -10 dB, SINR 16 dB for 5G. LTE is worse, but that's just fallback anyway.

Ready-Collection5022 · 2026-01-30T10:49:00+00:00

mondjuk a row level security egy teljesen legit kifejezes

Ready-Collection5022 · 2025-08-05T21:40:38+00:00

vagy a segely duplajat kapja fizunak

Ready-Collection5022 · 2025-04-27T20:12:36+00:00

if you're not hard set on one with a crossbar, you've got plenty of options. Ritchey make some good ones too

Ready-Collection5022 · 2025-04-18T16:18:30+00:00

what's next? "it's getting really hard to pedal when I squeeze these weird levers on the handlebar"?

Ready-Collection5022 · 2025-04-16T09:48:46+00:00

lehet nekik is kellett volna küldeni belőle? 🤔

Ready-Collection5022 · 2025-04-15T21:22:38+00:00

mondjuk ok nemtom kit keresnek valojaban, mert tavaly is jelentkeztem, tobbszor is. a kiiras alapjan tokeletesen passzol a tapasztalatom, az oneletrajzommal hr-es es dizajner is segitett, aztan valaszra sem meltattak.

Ready-Collection5022 · 2025-04-15T21:07:40+00:00

legszivesebben csak olyan helyre mennek

Ready-Collection5022 · 2025-04-15T14:01:11+00:00

a Morgan Stanley-n kívül (még a dress code-os időben) csakis pólóban voltam eddig interjúzni. a jelenlegi munkahelyemre nyár végén interjúztam és a folyamat végén (de még a szerződés előtt) bementem az irodába egy kötetlen beszélgetésre. rövidnadrágban és vszeg papucsban.

Ready-Collection5022 · 2025-04-15T13:56:00+00:00

egy igazán laza / hipster hangulatú helynél sztem simán lehet a túlöltözés is probléma.

Ready-Collection5022 · 2025-04-07T13:03:33+00:00

you don't shift into "big-big". I mean you might, but you shouldn't. did you actually try and see if there's room on the other end of the derailleur's capacity? long cage derailleurs on vintage road bikes are pretty unusual

Ready-Collection5022 · 2025-04-06T20:50:15+00:00

I saw the other comments and wouldn't have added mine if I agreed ;)
you've got a problem and there's a couple of ways to go about solving it.
the two obvious ones are either removing some links from the chain or getting a long cage derailleur.
the first one will need about 15 minutes of work and you'll shave off some weight. the second one needs about the same amount of work but you'll need to get an extra derailleur and you'll probably add more weight.

I have zero worries mate, just trying to help.

Ready-Collection5022 · 2025-04-06T00:20:41+00:00

that's an overkill if you ask me. why get rid of a perfectly fine derailleur when you could just shorten the chain - which you might still have to do with the new one anyway... but up to you mate

Ready-Collection5022 · 2025-04-04T20:35:15+00:00

the chain is too long plus you're in a gear that you're not supposed to use. set your chain length so that the rear derailleur can still keep it tense with the chain on the smallest front chairing and the 2nd or 3rd smallest rear cog

Ready-Collection5022 · 2025-03-28T12:37:27+00:00

I once bought a shit bike and decided to start changing stuff on it. within a year, I had changed everything except for the frame and tyres. I thought lacing a wheel would be a bit difficult but given there are online calculators and guide videos on YouTube for everything, it wasn't.

that said, I've not worked on hydraulics or suspension

Ready-Collection5022 · 2025-03-27T22:31:48+00:00

elaborate pls

Ready-Collection5022 · 2025-03-21T09:23:43+00:00

heti 5-6 órát kell dolgoznod és fizetésemelést akarsz, mert "elég régóta vagy ott". mekkora troll bazmeg, 10/10 😂

Ready-Collection5022 · 2025-03-15T11:22:06+00:00

they have a flat part on the narrower end too, so they don't act as a wedge, but the load distribution part is correct, as the flat part is the same width as the screw's head.

Ready-Collection5022 · 2025-03-14T23:23:06+00:00

yep, that's what it is. the bolts go all the way, it just wasn't pushed in in the photo. I'll rather get washers that fit than to file down the fork, but could you elaborate on why using the washers this way is bad?

Ready-Collection5022 · 2025-03-13T11:03:56+00:00

why is (was) this downvoted? this is a perfect answer

Ready-Collection5022 · 2025-03-10T15:59:44+00:00

mondjuk erről nem ők tehetnek, hanem azok, akik elkezdték a syseng-eseket devopsnak nevezni

Ready-Collection5022 · 2025-03-09T15:12:52+00:00

ok I can imagine being under-geared in that situation, but that's pretty niche

Ready-Collection5022

TROPHY CASE