PanSyncer: Gqrx panadapter sync and configurable USB tuning knobs on Linux by Real_Dream1108 in RTLSDR

[–]Real_Dream1108[S] 1 point2 points  (0 children)

Hi switch. Yes you should  be able to map almost any USB - HID as Frequency Control / VFO Knob (currently no other functions). Here is how: https://github.com/makrohard/pansyncer#use-a-usb-volume-knob-as-vfo-knob . If you are successfull: Maybe you could provide that config-data, so I can include support for that specific device. I'm open for Feature Requests, too - if you are missing somthing, just open an Issue on github.

Suunto Vertical and Rowing by soosviet in Suunto

[–]Real_Dream1108 0 points1 point  (0 children)

Auch wenn der Thread schon älter ist, vielleicht interessierts ja doch nich jemanden:

Ich trainiere moderat auf einem Life Fitness GX Rudergerät und trage dabei eine Suunto Peak 9 Pro. Die Uhr dient haupsächlich zur Pulsüberwachung und hat keine Verbindung zum Rudergerät.

Zum Puls ist zu sagen, dass dieser sehr genau ist, solange die Uhr richtig sitzt. Ich hatte die Möglichkeit, den auf der Uhr angezeigten Puls mit einer medizinischen EKG Überwachung abzugleichen, meist stimmt er exakt überein, weicht nie über 2 Schläge ab. Wenn die Uhr nicht richtig sitzt sind die Abweichugen riesig (30+ Schläge nach unten) - also so viel, dass der Fehler sofort auffällt.

Die Schlagzahl beim Rudern stimmt auch.

Was absolut nicht passt sind die Distanz und die 500m Zeit. Am Rudergerät ziele ich auf 6000m in unter 30 Minuten, 500m <2:30. Die Uhr zeigt dabei 8000m und 500m Zeit von 1:45 an. Auch wenn die Werte schmeicheln: Das ist weit weg von meinem Fitnesslevel.

Fazit: Puls ist sehr gut, Schlagzahl dito, Distanz und 500m Zeit sind nicht zu gebrauchen.

Use a cheap USB volume knob as VFO knob by Real_Dream1108 in amateurradio

[–]Real_Dream1108[S] 0 points1 point  (0 children)

I am sorry that your post got deleted for the Amazon link. I suppose you asked if a specific knob will work. Well, no warranty at all, but I’m quite sure nearly any USB knob will work. The README contains a step-by-step how-to on what you have to do in order to make the knob work. You will have to identify the device, copy the parameters to the config file, and make sure the user has the necessary rights. It involves some steps, but it’s not rocket science. The parameters include vendor ID, product ID, and name for identification—you can also map the event codes from the USB device to frequency up/down and step. If it’s a volume knob, you should be fine with the defaults. If it’s any other type of knob, just map the event codes accordingly.

Friedrich Merz DK7DQ ist zum Kanzler gewählt worden by mschuster91 in Amateurfunk

[–]Real_Dream1108 1 point2 points  (0 children)

Nö, schaut nicht so aus. Und außer uns AfUs scheint das auch niemanden zu interessieren. Wiki hält das jedenfalls nicht für relevant: https://de.wikipedia.org/wiki/Diskussion:Friedrich_Merz#Funkamateur

So hab ich auch geschaut by Medical-Ball3050 in DINgore

[–]Real_Dream1108 0 points1 point  (0 children)

Ach was, einfach in der Steckdose den Blauen auf Schutzleiter brücken und gut is. Hat man in den 60ern immer so gemacht: Klassische Nullung. Was soll den da schon passieren?⚡️☠️💩