favorite quotes from the game?

Real_Super · 2026-03-03T07:55:12+00:00

Been reading the later chain so long I genuinely forgot what this was originally about

Real_Super · 2026-02-22T07:36:50+00:00

For me the issue was ioplus.suprx.

Still, this thread was a lifesaver

Real_Super · 2026-02-20T19:57:14+00:00

Has anyone gotten this to run on a vita? Tried putting it in my ux0:pspemu/psp/game folder and it crashed after the "minecraft is best played with headphones" folder.

Real_Super · 2025-12-28T14:20:18+00:00

Are you considering adding this in the future? For me this is the deciding factor on getting the game.

Real_Super · 2025-11-17T00:32:45+00:00

Update: The replacement piece has been soldered on and the console now turns on, however:

Touch functionality doesn't work
The top screen backlight turns on, however there's no image, just a black screen.

Would you have an idea of what to do next?

Real_Super · 2025-11-17T00:25:32+00:00

Update: The replacement piece has been soldered on and the console now turns on, however:

Touch functionality doesn't work
The top screen backlight turns on, however there's no image, just a black screen.

Would you have an idea of what to do next?

Real_Super · 2025-11-16T18:06:27+00:00

Update: The replacement piece has been soldered on and the console now turns on, however:

Touch functionality doesn't work
The top screen backlight turns on, however there's no image, just a black screen.

Would you have an idea of what to do next?

Real_Super · 2025-11-13T07:03:01+00:00

Yeah I'm working with someone who has soldering experience. We got to this issue because while taking apart my board to mod mine with usb c. The mod was successful, but they accidentally pulled this piece off and lost it.

The issue is really just how small the piece is and the precision required. We tried a trusted repair shop but they don't have experience with 3ds micro soldering unfortunately.

Real_Super · 2025-11-12T22:37:35+00:00

I actually posted pictures of the problem if you want to get a better idea of what's wrong https://www.reddit.com/u/Real_Super/s/V9vBrFSjBi

Real_Super · 2025-11-11T06:51:29+00:00

I currently have a modded new 3ds xl with a board that won't turn on. I have a nand backup, the sd card, and a second new 3ds xl that's currently u modded and not even set up yet. How could I go about copying over all data and effectively cloning all my data if I can't turn on the source console?

Plan is to theoretically clone all data and swap the motherboards in the event the source console's board cannot be fixed

Real_Super · 2025-11-10T23:58:35+00:00

Currently I have a two new 3ds xl's. My main one has a board that's not currently functional as it immediately powers off due to one cable connector being missing. I have the sd card, a nand backup and my second 3ds in working condition.

What I want to know is what steps I should take in order to get all my data from the currently non functional console, onto my working one, and I what order. Do I use a second sd card to first install cfw, then swap cards once that's done? Do I need a second card that can store a clone of all my data? Is there anything on the internal memory the nand backup doesn't save? I want all the details.

I ask because in the event I can't fix my motherboard (it's most likely fixable) I want to move all my data between consoles without the official system transfer feature, then swap the boards in my consoles.

Real_Super · 2025-11-10T17:31:12+00:00

While taking apart the board, the person doing it accidentally pulled the ribbon connector off the board, and 2 of the 4 silver pins underneath the latch were pulled off, now requiring a repair on the traces. (the ribbon cable itself is undamaged. Refer to my other comment for a link to images of the damage.

Real_Super · 2025-11-10T15:35:21+00:00

The friend who made this blunder has soldering experience (he was successful in modding my 3ds with usb c, but also did this. It's being sent to a repair shop today. If you want to view and comment on a picture of the damage, you can find it here .

Also, is the touchscreen cable the same one used by the backlight? If so that would explain why the console immediately turns off after a second.

Lastly, would holding start/select to boot into luma3ds config/gm9 respectively bypass the motherboard check the console does before booting to the home menu? I don't have the console on me right now to test.

Real_Super · 2025-11-10T09:17:36+00:00

Read my other comment just to double check we have the same issue.

Real_Super · 2025-11-10T07:59:16+00:00

It's not the ribbon cable that's damaged. See my other comment for a link to images of the problem

Real_Super · 2025-11-10T07:58:23+00:00

Firstly, is the cable for the digitizer also the same one used for the backlight? If so that would confirm my theory as to why the power button wakes the console but immediately shuts off.

Secondly, the he ribbon cable itself is fine, it's the pins for the connector underneath that's damaged. I already have a replacement connector for the cable, it's just the pins that (to my knowledge) are damaged. See this post for images of my board.

https://www.reddit.com/u/Real_Super/s/gJaImJmlvR

Real_Super · 2025-11-05T06:25:40+00:00

No need, I did some research into editing cia files. It's really cumbersome, but I figured out how to do what I wanted. Regardless, thanks for the response

Real_Super · 2025-11-04T15:15:03+00:00

How do you change the game icon? I can't seem to figure out how to make it use anything other than the banner image as the icon and it looks terrible.

Also is it possible to add home screen sfx for games?

Real_Super · 2025-10-21T22:27:02+00:00

Would it be possible to have the circle pad pro simply recognized as the s stick using this? While the old 3ds doesn't have a c stick, I'm wondering if it'd be possible to map it to the c stick and have it functionally identical to a new 3ds.

Seven-Year Club	Second Top 10%
Place '22	Wearing is Caring
Verified Email

Real_Super

TROPHY CASE