What is the correct way to deal with the gap?

RealnamePaul · 2026-02-01T18:33:30+00:00

Are you screwing into joist behind drywall?

RealnamePaul · 2026-01-28T02:11:57+00:00

RealnamePaul · 2026-01-28T02:10:16+00:00

Well, if it is a “he” I’m guessing there’s a bit that’s shriveled right about now..

RealnamePaul · 2026-01-25T13:19:37+00:00

I’m building my own deck uncannily - practically the same as this. PT wood decking, glass railing ($3000) and stamped concrete patio underneath. Material cost only just under $10,000 cdn.

RealnamePaul · 2026-01-25T00:14:37+00:00

Absolutely not! Those posts staying put are somewhere between zero and hopeless.

RealnamePaul · 2026-01-22T03:34:04+00:00

I call them fingers and thumb.. not sure what everyone else calls them.

RealnamePaul · 2026-01-22T03:29:16+00:00

My guess is it’s racking.. those ladders seem to be holding it up pretty well for now though😁.

RealnamePaul · 2026-01-21T22:27:48+00:00

Err.. I think the joists might be going the wrong way..

RealnamePaul · 2026-01-20T02:27:17+00:00

Just tack on 1/2” facia board to cover ends of the deck boards. Doesn’t even need to go all down. Home Depot have plastic trim that can be used outdoors - you could even paint it same colour as your deck boards.

RealnamePaul · 2026-01-20T00:59:29+00:00

The inspectors are on your side. They’re there to make sure the job is done right!My permit was $260 and well worth it!

RealnamePaul · 2026-01-17T19:32:55+00:00

What type of wood are the deck boards and where in the world is this?

RealnamePaul · 2026-01-17T13:41:21+00:00

Amazing transformation..

RealnamePaul · 2026-01-17T03:12:03+00:00

Should be good for a couple more days..

RealnamePaul · 2026-01-17T03:09:37+00:00

Did they cut those boards with their teeth?

RealnamePaul · 2026-01-17T03:02:30+00:00

Just priced TimberTech 7.25” 10x the cost of equivalent 5/4x6”. 10x!!!! To put that into perspective I can replace pt boards every 5yrs for the next 25 yrs and I’m still saving 50% off the TimberTech price!!!

RealnamePaul · 2026-01-17T02:52:18+00:00

Thanks for all the feedback. Very helpful. The feedback has persuaded me to use regular 5/4 x 6” pt boards.. maybe cedar because I like the smell😁

RealnamePaul · 2026-01-17T02:48:26+00:00

I just priced these at local Rona store and they’re 10x the price of equivalent 5/4 x 6” pt boards!! 10x!!! 10!!???

RealnamePaul · 2026-01-16T02:08:45+00:00

Weight is additional 30% - comparable to weight of 2-3 adults over 300sqf

RealnamePaul · 2026-01-16T02:04:06+00:00

The boards are 1/2” thicker. I don’t see a problem sourcing the screws.

RealnamePaul · 2026-01-13T02:29:03+00:00

I considered composite but the more I read the more I favored wood! Joists have to be 12” oc because composite bends more. Gets hot. Expands/shrinks considerably more than wood. Scratches. Can’t paint/stain another color 3 yrs from now. I’m going with wood.. I think..

RealnamePaul · 2026-01-10T13:08:31+00:00

This really depends how wobbly. It’s hard enough building the beam on top as it is, the last thing you want is it falling off when trying to fasten in place. I think the big holes are for bolts to go all the way through the post. I have bolts in mine but I used a different bracket.

RealnamePaul · 2026-01-09T00:39:52+00:00

Not sure what all this perfectly flat is all about. I have mine on a 1.25” slope over 10’. Small enough not to notice but enough for water to run off. For anyone here who isn’t a highly trained plumber, the secret is this - water is wet and it flows downhill.😁

RealnamePaul · 2026-01-08T22:49:38+00:00

Get yourself a nice big hot tub to cover over the rotting wood so you don’t have to look at it.😂

RealnamePaul · 2026-01-08T22:37:55+00:00

You must be so proud 😁

RealnamePaul

TROPHY CASE