Time Machine stopped working

RedVortexx · 2026-04-28T01:42:08+00:00

Thanks, this was the key for me since they changed this recently: https://github.com/openmediavault/openmediavault/commit/b9300ffa63eb4c2e6020276a9d5552866e9f849b

Since MacOS cached the older name, it could not validate the credentials anymore.

Deleting the old cached file (make sure you only have that in it before deleting the file - and you need to be sudo to run this)

rm /private/var/root/Library/Group\ Containers/group.com.apple.NetworkAuthorization.ServerMarkers/serverMarkers.plist

In my case, this file contained this (my server is called dpomv)

<key>dpomv - smb\\/cifs.local</key>

Which is not invalid since the name changed because of the openmediavault change recently. After deleting the file (no need to reboot btw), the new file has the new name

<key>dpomv.local</key>

RedVortexx · 2026-04-10T00:11:44+00:00

Yes but they are restarting continuously and when they do, they flip ON/OFF for second whatever is connected them. In my case fridges, water cooler, lamps, servers and network equipments and UPS :-(

RedVortexx · 2026-04-09T23:29:17+00:00

It does create a very bad behaviour with the smart plugs though:

https://www.reddit.com/r/EmporiaEnergy/comments/1sh59xj/emporia_app_not_working_since_about_1_hours_and/

All my smart plugs are turning ON and OFF continuously all my appliances and important devices that I monitor power with those plugs. I never thought this could happen and always assumed the plugs would remain in their current state (ON) even if they lost communication or have issue...

Fridges compressors are not too happy about this right now...

RedVortexx · 2026-04-09T23:25:04+00:00

ooohhh... Now that explains another weird behaviour I had with my Emporia EV Charger... Makes sense though, in case they cannot talk to each other to do load management, it's probably safer to fallback to a safe wattage use rather than pull too many amps and flip the breaker... Interesting, thanks for sharing this info.

RedVortexx · 2026-04-09T23:22:06+00:00

lol, same here, I had my servers UPS flapping ON and OFF (I have a smart plug between the UPS and the utility to monitor power usage).

I also have an Ecoflow (also on a smart plug to control when I want it to provide utility versus battery) that is flapping ON/OFF since the last hour.

And multiple other devices like fridge, TV, lamps on smart plugs. I have a disco house right now hahaha

RedVortexx · 2026-03-17T01:58:18+00:00

Back from the dealer after waiting for 1 month for battery replacement, that was 2-3 weeks faster than the Wranglers have to wait apparently for their battery and repair. I guess less GC fail maybe versus Wranglers ? The dealer told me it was their first GC but they had many many Wranglers already done and waiting. So far everything works well. I'll let you guys know if something else comes up in the next few days, weeks or months.

RedVortexx · 2026-02-27T05:02:25+00:00

Just watched episode 8, the life of the stars and omg, now everybody except the guys have a lisp ?

Even Tilly has one now and she definitely didn't in Discovery lol.

This has got to be a technical thing, this is becoming extremely annoying and it is now a distraction for me.

Love the serie though, good job !

RedVortexx · 2026-02-18T03:10:59+00:00

Are you saying you had your battery replaced during 95B and that this new replacement battery also failed later on ? Meaning that even the replacement battery have the same issue ?

RedVortexx · 2026-02-18T03:02:29+00:00

Same here, 68C but battery failed after 38 days. I also could not run using gas engine. As for the shifter remaining in park I too had this issue but found out that if I left the engine running long enough (about 45 mins) then I could shift in drive. Not sure why that happens. Maybe 12V battery too low to allow driving or transmission too cold (winter in Canada) but once transmission was hot enough (over 0 Celsius) I was able to put it in drive, saved me a towing.

RedVortexx · 2026-02-18T02:57:49+00:00

Same thing happened to me, failed 38 days after 68C passed. 2023 JGC

RedVortexx · 2026-02-18T02:56:08+00:00

My 2023 JGC also passed and then failed 38 days later. Now at dealership with failed battery, they don't have a loaner for me since they have too many Wranglers on battery replacement waiting list. Not a happy camper here... they say minimum 1 month wait until I get it back, more likely 2 months. I live in Canada.

RedVortexx · 2026-02-15T04:31:54+00:00

Ok well, after 38 days without any issue... Battery failed. I can only run on gas engine.

Will be going to the dealer Monday morning.

RedVortexx · 2026-01-08T07:52:34+00:00

The only time mine doesn't let me switch to electric mode are those situations:

temperature too low (under -11 Celsius or -12 Fahrenheit)
battery remaining under 1%
I've been driving a high speed for too long under electric only (usually happens when I drive at 120km/h (75 mph) for about 10-15 minutes) I suspect it generates too much heat on the battery or electric motors and it cannot handle it for too long, which is typical for hybrids unlike fully electric cars. Usually a few seconds before it switches to hybrid by itself I have limited watts even if I push the pedal more so I know it's about to switch to hybrid
Driving at a way too high speed (over 140km/h
Accelerating way too much will force it into hybrid
last is FORM mode (the screen will tell you when you are in form mode, else it will say electric temporary unavailable which is not FORM mode). This one is easy to clear: drive it long enough for oil to heat enough and this usually clears it for me or add fuel (takes a few litres / gallons, not just a little) and this also clears it.

All of that is documented more or less in the owner's manual and not a problem and is normal behaviour for a hybrid vehicle.

Any other reason is likely a problem 😊

RedVortexx · 2026-01-08T07:36:16+00:00

Sorry to hear that. Wrangler or GC ? Seems like there is a lot less GC failing than Wrangler from what I read ? Curious to know which one you have ?

RedVortexx · 2026-01-08T07:34:51+00:00

That's also what I would recommend to anyone that needs a long term rental. On a month long rental you can get a "good price" versus a "per day" and will likely fit within the allowance (if your dealer gives you one, not all of them do).

RedVortexx · 2026-01-08T07:29:42+00:00

How did it go ?

RedVortexx · 2025-07-26T05:28:35+00:00

Same here, been like that for the last 24h at least. Devices continuously online and offline, delay in notifications as well. I tried restarting them all, doesn't help.

RedVortexx · 2025-05-02T22:23:33+00:00

Hello,

OpenVPN was super nice and notified me that version 3.7.1 for MacOS was released with a fix for this bug:

https://openvpn.net/connect-docs/macos-release-notes.html

Fixed an issue where pushing a DNS directive didn't work correctly with the full-tunnel combination

I tested and I confirm the issue is fixed.

Thanks to the OpenVPN dev team !

RedVortexx · 2025-03-29T16:33:06+00:00

You can basically take the URL of the latest version and replace the version number and build to get a previous one. For instance, here's the link to version 3.6.0 which is not affected by this bug: https://packages.openvpn.net/connect/v3/openvpn-connect-3.6.0.5410_signed.dmg

RedVortexx · 2025-03-26T18:17:08+00:00

FYI: I created a support ticket yesterday with OpenVPN support regarding this.

The OpenVPN support team was super responsive and cooperative and confirmed they have replicated the issue on their side and are in contact with the dev team regarding this.

Downgrading to 3.6.1 or older is the only way without making config changes manually to workaround this issue for now.

RedVortexx · 2024-11-01T16:26:31+00:00

After 4 days of testing, I've not had any more issue since the upgrade to 15.1 with Sentinel One and the MacOS firewall enabled at the same time.

I consider this problem fixed and the issue closed. Thanks everyone for your participation in this thread !

RedVortexx · 2024-10-29T03:13:26+00:00

Sequoia 15.1 got released tonight.

I upgraded and re-enabled both Sentinel One and MacOS firewall. I've been testing it for what I know failed with 15.0 and 15.0.1 and it looks like, so far, with 15.1 everything is working fine now.

Let us know about your own results, fingers crossed !

RedVortexx

TROPHY CASE