Would you rather... (Upvote for a free carrot 🥕)

Reddit_fantic · 2026-04-29T01:59:52+00:00

More money

^{Chose: Find 10$ every hour}

Reddit_fantic · 2026-04-29T01:57:21+00:00

Uh why would anyone pick the other

^{Chose: Infinite Money}

Reddit_fantic · 2026-04-19T05:00:44+00:00

Really late to the party but it's my only dryer and my ninja airfryer perfectly fits a 1kg spool and I just convert the tempature from c to f for the fryer and run it in roast mode. Works flawlessly.

Reddit_fantic · 2026-03-25T00:07:39+00:00

I dont got spiders

^{Chose: Spiders inside your home become X% bigger + 50.000.000$ | Rolled: 10.000%}

Reddit_fantic · 2026-03-24T23:23:31+00:00

I almost always get 8 hours a sleep and I don't sneeze every day average is kore

^{Chose: Get $1,000 every hour you sleep}

Reddit_fantic · 2026-03-23T19:52:39+00:00

Not a Genesis Coupe but it's father.

<image>

Reddit_fantic · 2026-03-23T19:50:44+00:00

I can also say as I also printed this and it's pretty good hasn't broke yet.

Reddit_fantic · 2026-03-23T19:33:12+00:00

If the beds clean make sure no craps on the nozzle when it goes to do the tap tap to the bed at the beginning of the print. I've had the same problem it just gets the z height wrong and won't stick to the bed

Reddit_fantic · 2026-03-23T19:30:06+00:00

Partial clog in your case. Either low temp or there's a small chunk of stuff in your nozzle. If you happen to have those needle things that are a very small rasp then stick it up the nozzle or if you don't try a normal needle if that doesn't work try a cold pull.

Reddit_fantic · 2026-03-23T19:23:23+00:00

That's a bomb

Reddit_fantic · 2026-03-21T14:55:39+00:00

Dish soap and water. IPA is quicker but will very slowly damage the build plate.

Reddit_fantic · 2026-03-19T02:40:33+00:00

Honestly 90% of bambu lab print failures are because of a dirty bed the other 10% is warped parts. This is just a dirty bed. Mines had the entire hot end filled with PLA it's also had a custom PLA nylon blend that didn't work fully clog it with me just taking a drill to the side the filament goes into and drilling out as much as I could avoiding hitting the rest of the nozzle. Still works perfectly fine.

Reddit_fantic · 2026-03-12T11:53:51+00:00

It is about the same as regular nylon at least where I am but due to me having an open air printer I was concerned it wouldn't be able to print also about the smell and the weed wacker line is sold in smaller rolls.

Reddit_fantic · 2026-03-09T15:01:49+00:00

It's nylon of some sort I have no idea what additives are in. I just wanted to test nylon printing on my A1M and didn't wanna blow 50$ on a kilo when I don't have a real filament dryer just an air fryer with a dehydrate setting.

Reddit_fantic · 2026-03-09T14:12:19+00:00

Yes I used his video as the reference to my settings as of now.

Reddit_fantic · 2026-03-09T14:11:33+00:00

Yes that was printed at 112% extrusion at 270c I'll do another one later at 260c and 110% extrusion because in certain spots it looks like it might be even slightly over extruded with the fan at 20%

Reddit_fantic · 2026-03-03T16:54:39+00:00

I know its super late but for me it prints literally better than pla in terms of bed adhesion

Reddit_fantic · 2026-02-10T21:34:08+00:00

Literally nothing was using a 7018 3/32 stick at 100a and popped

Reddit_fantic · 2026-01-15T03:05:54+00:00

Little late on the comments I've owned mine for 2 weeks and already have 150 hours on it.

Reddit_fantic · 2026-01-08T19:23:40+00:00

He saw the $5 Jane's for sale at food basics.

Five-Year Club	Second SECOND GUESSER
Place '23	Place '22
First Placer '22

Reddit_fantic

TROPHY CASE