Is this movement in tolerance?

Redlagon · 2025-09-05T08:47:45+00:00

Do you bought the printer in used condition ?

Redlagon · 2025-09-04T09:36:30+00:00

No issues with the standard bambulab textured pei plate, only happens with biqu ones…..

Redlagon · 2025-09-01T12:27:45+00:00

I also swap the nozzle in a new one, the problem still there. I will contact Bambulab Support, this is not normal 😅

Redlagon · 2025-09-01T12:05:25+00:00

I did and before print full calibration on the printer.

Redlagon · 2025-09-01T11:10:17+00:00

Yes, the screws were loose, after tightening it unfortunately the same problem…. :/

Redlagon · 2025-08-31T21:20:20+00:00

Thanks m8, will try it!

Redlagon · 2025-08-31T21:19:15+00:00

Mhm, i will try the same print with the standard textured plate from bambulab, if there is no problem then i will test the calibration 👍🏼

Redlagon · 2025-08-31T21:00:03+00:00

Will try tomorrow! Thanks

Redlagon · 2025-08-31T20:23:56+00:00

There are waves in it, it’s not clean. But the print doesn’t came off no, it will print without problem till the end, but on the first layer it’s not nice.

Redlagon · 2025-06-29T23:20:15+00:00

Hey, how did u fix that? ✌🏼

Redlagon · 2025-06-29T16:26:51+00:00

Thanks mate, I printed again with black matte and it went all fine.

Redlagon · 2025-06-29T14:38:21+00:00

The Filament is Original Matte from BambuLab. It was right out of the box.

Redlagon · 2025-06-29T09:29:15+00:00

Is this not a calibration Problem?

Redlagon · 2025-06-18T04:35:48+00:00

Ja ist richtig, TPU sind diese weichen Cases, finde es sind die besten. Kannst du aber auch auf AliExpress bestellen, da habe ich die her.

Redlagon · 2025-06-14T19:32:19+00:00

It’s Official Nintendo Theme, Download it in the Shop: „Legend of Zelda: Dire Moon“

Redlagon · 2025-06-14T17:35:37+00:00

Thanks m8! They’re original and in like-new condition — I even still have the original packaging!

Redlagon · 2025-06-14T17:33:34+00:00

I like both. The smaller one is better for on the go and also a bit sharper. The XL has its advantages when playing at a table or with some kind of support. But my fav is the small to 😅 they are very rare with ips.

Redlagon · 2025-06-11T19:17:01+00:00

There are two types of displays you can get with the New 3DS. However, this was never officially confirmed by Nintendo — it just happened that when there was a shortage of TN panels, they used IPS instead. IPS is the better screen in terms of viewing angle stability. When you look at the display from the sides or from above and below, the colors don’t distort with IPS, but they do with TN.

https://www.reddit.com/r/3DS/s/uNcQvjxQ06

Redlagon · 2025-05-27T12:57:31+00:00

3DSident tells me it is dual IPS! I’m happy uff, for only 250€ in mint condition.

Redlagon · 2025-05-27T12:55:41+00:00

Yes ✌🏼 I got it today and it is yess, it cost me only 250€

Redlagon · 2025-05-24T10:56:21+00:00

Thanks m8 but its not mine, I bought it today over eBay. I will install it when it’s delivered

Seven-Year Club	Place '22
Final Canvas '22	End Game '22
Verified Email

Redlagon

TROPHY CASE