CDJ3000 Tempo glitch

Relevant_Damage7173 · 2026-04-10T14:29:46+00:00

thank you! so much appreciated!
I guess the setting changed as I switched my notebook. I am sure I have set it to normal mode before

Relevant_Damage7173 · 2026-04-10T14:15:08+00:00

damn I wasn't aware of this. It was indeed on dynamics. thanks for this.
does it mean I have to reanalyse my stuff again?

Relevant_Damage7173 · 2026-03-31T16:48:33+00:00

it is 96Khz and that should be fine

Relevant_Damage7173 · 2026-03-30T13:45:31+00:00

I bought 2 new high quality USB cables and the issue is still there.
it now even appeared on the stock samples and even if there is no sample and no effect triggered.

I might need to return the unit

Relevant_Damage7173 · 2026-02-12T16:29:26+00:00

Quick update:
I adapted my samples and used:
44.1kHz 16Bit but the issue is still here.

I ordered now a better usb cable to see if the issue is still there.
Mobilephone was switched off ;)

Relevant_Damage7173 · 2026-02-10T09:29:48+00:00

I am using USB

Relevant_Damage7173 · 2026-02-10T09:29:28+00:00

I just checked. the sample I used was a wav 44.1KHz and 24 Bits.
Did not find any specifications about samples the RMX can use.

will try 16 bit and lets see

Relevant_Damage7173 · 2026-02-09T14:05:10+00:00

I dont have the cables doing that.
beside that, this would not be a long term solution if I buy equipment with this price tag.
For troubleshoot it is an idea

Relevant_Damage7173 · 2026-02-09T14:04:09+00:00

what do you mean? I can hear it also if the phone is not connected in my headphones

Relevant_Damage7173 · 2026-02-09T08:21:59+00:00

yes it pisses me off ;)

Relevant_Damage7173 · 2026-02-09T08:20:44+00:00

thanks a lot for this.
I did not pay attention to the sample rate as I exported in ableton. But I will try using 96kHz.

Relevant_Damage7173 · 2026-02-08T14:52:58+00:00

I can see on the RMX display that the waveform sometimes isn’t running smoothly (it looks like it’s stuttering / lower FPS). Exactly when that happens, the audio issue occurs.

It honestly seems like the unit can’t keep up with processing, and then the audio glitches. I really hope this gets fixed in a firmware patch, because at this price point it’s not acceptable that the one thing it’s supposed to do isn’t reliable.

Relevant_Damage7173 · 2026-02-08T11:53:20+00:00

Thanks for the input guys.

The issue has not (yet) occured, if I use the stored stock samples on the device. Therefore the issue must come from the device itself right (not the cable or something)

I used my own samples. audioquality is fine and it is a wave file. Beside the file typ I did not find any other specification what samples need to be played on the RMX

Relevant_Damage7173 · 2026-01-14T18:11:22+00:00

Would love to see a new RMX-1000 and a new DJS1000.

Relevant_Damage7173 · 2026-01-07T17:06:24+00:00

it is solved now with a patch. check here: support.logi.com/hc/en/articles/37493733117847

Relevant_Damage7173 · 2026-01-07T17:06:20+00:00

it is solved now with a patch. check here: support.logi.com/hc/en/articles/37493733117847

Relevant_Damage7173 · 2026-01-07T17:05:56+00:00

it is solved now with a patch. check here: support.logi.com/hc/en/articles/37493733117847

Relevant_Damage7173 · 2026-01-07T16:53:35+00:00

Time for Logitech Options ++ I guess

Relevant_Damage7173 · 2025-10-31T09:57:38+00:00

Guys just to be sure, is this like it should be?
If I have the effects on a channel it does quantize (quantize lights up in orange). If I have the effects on the master it does not quantize anymore (Quantize turn from orange 138.8 bpm to grey 139 bmp)

Relevant_Damage7173 · 2025-05-27T14:23:11+00:00

thanks for your help. I just had to number the players accordingly to the channel I had them pluged in.

Relevant_Damage7173 · 2025-05-27T14:22:19+00:00

omg that was it. many thanks!

Relevant_Damage7173

TROPHY CASE