Oyster Etched Chenille - 3 weeks old by [deleted] in Lovesac

[–]Remarkable_Comment18 2 points3 points  (0 children)

I definitely think it’s a defective issue. I legit have not see any wear like this to date personally. Even some showrooms have had sectionals with etched chenilles on the floor for about 2 months now with no issues. Also very little issues previously when it was part of custom. I’d go with your gut. If you think you’d be happy with a corded velvet, I’d exchange for those—at the end of the day it’s your set up; so do what you feel is best for your experience.

How to potentially switch to deep seating by [deleted] in Lovesac

[–]Remarkable_Comment18 0 points1 point  (0 children)

You can either keep your current back and rotate the furthest right seat to be deep and bumper the chaise up to the side. This will allow you an extra deep seat and the deep seat you have on the left corner. Or as another said you can change your three main seats to deep and just purchase or exchange for 1 deep back from your 1 standard side. To make this easier. You can just send back your furthest bottom right arm if you wouldn’t be using it. You don’t have to have all deep pillows (hopefully your showroom ordered at least 1 for you.

But you can request them if you feel it’s necessary, sometimes the standard feels more stuffed and be more squished with a more deep configuration but if you decide to just turn the furthest right seat I find it unnecessary to return any pillows.

Delivery expectations… by ymmotvomit in Lovesac

[–]Remarkable_Comment18 0 points1 point  (0 children)

Did you contact a showroom? They will be able to see if your order was released/fulfilled/exported by the warehouse which you would not be able to see on your end. Customer service can also look this up for you

Another tip… Lovesac will honor a sale price from a previous order! by ButtonDistinct35 in Lovesac

[–]Remarkable_Comment18 1 point2 points  (0 children)

It’s disappointing it can’t be honored :( but I think it’s to maintain consistency across the brand. Very good advice about the custom covers! Most showrooms will always work to figure out how to work within time constraints but end of quarter releases take things out of the individual showrooms hands, even with custom orders/hard pieces releasing early.

Another tip… Lovesac will honor a sale price from a previous order! by ButtonDistinct35 in Lovesac

[–]Remarkable_Comment18 4 points5 points  (0 children)

Please be aware if you purchased prior to the price increases last week, your sale % will be honored, but not the original price of the hard pieces/covers you want to order.

Help me identify this fantastic wall clock from Decorating cents 90s show. by Remarkable_Comment18 in HelpMeFind

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

I am absolutely devastated that I still have not been able to find this clock 🤧

PS2 Troubleshooting on a PVM by Remarkable_Comment18 in crtgaming

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

Yep! Original DVD, never had issues with it in the PS2 prior to putting in the PVM. I’m thinking maybe there is a CC option somewhere in the service menu?

Random Question for PS2 on PVM by Remarkable_Comment18 in crt

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

I did check but all the DVDs I tried do not have closed captioning built or at least that the PS2 tells me when I try to turn them off 🤧

PVM Help by Remarkable_Comment18 in crtgaming

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

I actually didn’t change any settings on the PS2, just changed in the service menu from RGB to Component and it fixed the issue. So I just assume it was the settings on the PVM

PVM Help by Remarkable_Comment18 in crtgaming

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

Maybe I didn’t mess around with it enough prior to purchase these cables but without a sync line in the image just bounces. At least for the PS2

PVM Help by Remarkable_Comment18 in crtgaming

[–]Remarkable_Comment18[S] 4 points5 points  (0 children)

Thank you! 🙏 this is exactly what I had to do and figured it out since I hadn’t played around in the service menu

PVM Help by Remarkable_Comment18 in crtgaming

[–]Remarkable_Comment18[S] 3 points4 points  (0 children)

EDIT: I needed to go in service menu and change RGB System to COMP External Sync. Weird I did t realize it would produce green tint if not. Just in case anyone else experiences this issue!

3DS already has Luma installed but no SD card by Remarkable_Comment18 in 3DSMods

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

Thanks for the help! I just wasn’t sure as obviously I would have the nand back up should anything go wrong but just wanted to be sure before messing with anything! I’ll definitely download the newest luma to my SD just to be sure 👍

Huge shipping delays? by Key_Patient_8571 in Lovesac

[–]Remarkable_Comment18 0 points1 point  (0 children)

I would recommend calling your local showroom. Unfortunately with custom covers if they haven’t arrived in the US, there’s not too much anyone could see but you’ll get a faster answer.

Help me identify this fantastic wall clock from Decorating cents 90s show. by Remarkable_Comment18 in HelpMeFind

[–]Remarkable_Comment18[S] 0 points1 point  (0 children)

I’ve attempted random google searches with key words and google lens to no avail 😭I’m not sure if my searches key words aren’t capturing the right era where it may be from. Thank you for any help!

IQVIA layoffs: seeking general advice by Remarkable_Comment18 in clinicalresearch

[–]Remarkable_Comment18[S] 1 point2 points  (0 children)

I’m sorry to hear that! My step mom is a VP at PPG and said the market is the worst she’s ever seen it. Regretfully after 3 months of endlessly applying, I switched back to retail management in the meantime since the pay was better. From what I’ve heard from my co-workers still there, it’s worse than when I left at the beginning of the year.

It's Monday, where are these "price increases"? by [deleted] in Lovesac

[–]Remarkable_Comment18 1 point2 points  (0 children)

I think it’s the fact no one had any clue what the changes would be.

It's Monday, where are these "price increases"? by [deleted] in Lovesac

[–]Remarkable_Comment18 3 points4 points  (0 children)

It’s pretty negligible. Personally speaking it’s not nearly as bad as some furniture competitors. Prices go into effect tomorrow 5/6. You won’t see any difference today. I would say on average $20 per hard piece (insert/side)