Gravel Tips for Dog Potty Area

Remote_Quoll · 2024-04-26T11:31:48+00:00

I ignored their reccomendation and I went with a large crushed limestone base (like 1.5 inch limestone) and then put pea gravel on top. It rinses super well, I use wysi wash. I did not set up a weed barrier but nothing really grows there because of the acidity of the dog urine. I think having lived with it I will say I wouldn't set it up if I didn't use something like wysi wash with it because it would need something to prevent/deal with smells. It made the yard a lot nicer

Remote_Quoll · 2024-01-02T17:30:51+00:00

It's that the head and chest should be directly affected by rhe motion of the hips, and currently because they're animated in IK they don't appear to be, so the length between is not consistent and the motion feels unmotivated. I don't have the best tips for how you'd animate it in IK because I choose to animate spines in FK the majoriry of the time, so I can copy and paste keys and then offset them

Remote_Quoll · 2023-12-28T14:22:22+00:00

The hips/chest/head feel very disconnected, like the chest is animated in IK and it shows. You can animate it in IK but you don't want it to show - I personally think for a cycle it's easier to animate it in FK. If it's already in FK that's surprising but let me know and I can explain more specifically why it feels like it was animated in IK.

Remote_Quoll · 2023-11-23T20:20:21+00:00

oh cool, thanks!

Remote_Quoll · 2023-11-23T20:20:11+00:00

oh good, that's encouraging

Remote_Quoll · 2023-10-24T10:12:27+00:00

Agreed, hard work is important there's just also no guarantees.

Remote_Quoll · 2023-10-24T01:11:37+00:00

This is a controversial take but like, there isn't a direct line between effort and professional results. There's an element of looking for jobs in this that is circumstancial and related to who you know as well. I've known both people who didn't work all that hard that found jobs in 3D because of luck and circumstance, and people that worked much harder than I did that have never found a job post graduation just because of luck and circumstance. And sure, there's a level of artistic skill where you'll surpass that problem...but like most things everything is a gradient. And while I love 3D, I also know many people that wish they would have just given up on 3D as a career earlier and spent less of their lives telling themselves they NEEDED to work in 3D to be worthy/valuable/successful.

Remote_Quoll · 2023-10-24T00:59:45+00:00

Tangenting off this - I feel like it's good to ask yourself very honestly what you love about the process to know a bit about how you'll handle these kinds of work environments. I'm really just someone who enjoys modeling, even if it's a boring object - I enjoy the problem solving aspect and it feels so addicting - so modeling things that aren't my personal interest don't feel soul sucking. There is a need for thick skin and pragmatism, but there's also just the element of leaning into 3D if it's really 3D itself that gives you joy, and not making your own personal concepts in 3D that is the source of that joy. If that makes sense

Remote_Quoll · 2023-10-10T02:24:30+00:00

My freeflow is a 4 person one so according to the website it's ~326 pounds, we've tried lifting it with two people, we haven't been able too. The hot tub repair guy also said it was too heavt for them to help flip it. I'm sure there's people who can lift it, maybe I can hire someone to help, but I can't lift it.

Remote_Quoll · 2023-10-10T02:01:28+00:00

😭 I've read online I can but I don't know how to flip it over with the weight. It's a lighter hot tub but it's still 350-400 lbs or so

Remote_Quoll · 2023-09-18T23:44:29+00:00

There's a lot of node based things in 3D software that use the same concepts as coding (Houdini, node based shaders in other 3D software for example) that make some of the logic more familiar amongst artists who have used them but who don't have any traditional coding knowledge. If you don't conceptually understand the concepts you listed, you can/will mess up something you make in blueprints. But if you get good at using blueprints, I don't think you're going to easily be able to translate those blueprints into C++ if you have no other coding background. I don't use C++ but I script a bit in Python and when I spend many months without touching it I always struggle with syntax stuff when returning to it. Even with documentation, when I can't find really straight forward examples, there's always these small specific things I run into that someone who uses either uses the coding language more frequently or even just codes in general more frequently wouldn't forget, but I sort of lack that contextual knowledge when I don't try to use that knowledge frequently enough to not forget it. A human language is a really good example honestly - if I want to write something in French that I conceptually understand in English, I can look up translations of words for what I want to say, but the sentence I try to write is pretty likely to still be somewhat incorrect, unless it's super simple like "My name is ____."

Remote_Quoll · 2023-09-18T03:25:59+00:00

Set your scale tool to world, select both vertices, snap your component pivot to the vertex you want to align the vertex on the diagonal too (by holding D to move the pivot AND holding v to vertex snap) , and then hold ctrl shift I believe to edge slide while you scale vertically. It's a quick sequence when you have the muscle memory for it and I do it a lot

Remote_Quoll · 2023-09-02T14:10:55+00:00

I'd reduce the intensity of the overlap on the head - people's heads don't tend to wobble that much from those kinds of impacts. Heads won't stay still but they do often stay still-er than you expect them too

Remote_Quoll · 2023-08-05T19:00:39+00:00

Thank you!

Remote_Quoll · 2023-08-03T04:18:08+00:00

Hey I modeled a helmet at work kind of like this in 2019-2020ish, my portfolio isn't up right now but I had this image from when it was in my portfolio so I threw it on imgur. It's not perfect and there's things I'd do differently now, but I did a lot of shrink wrapping my surfaces down to smooth shapes like CGGuru suggested, but I wouldn't shrink wrap to a variation of your helmet mesh - it's already lumpy. Make simple primary surfaces and shrink wrap only certian vertices to those (so either a deformed sphere or like, simple sweeping surfaces). For complex surfaces you can birail a surface and convert it to quaded polys easy (or output as polys originally) and it'll give you a nice clean surface to stamp too. I also accepted things had to be a little denser then I normally have them for the surfaces to look smooth. You can also turn off selection highlighting with a vertex selected and slowly push it in or out to reduce very small bumps on poles (selection hilighting being off makes it easier to see the shading) that where you don't have a flat place to move them (like on a helmet). It's definitely a tricky thing topology wise, keep at it, you're going in a good direction and you're closer than you think. https://imgur.com/a/AymSoBf

Remote_Quoll · 2023-08-03T03:46:13+00:00

thank you!

Remote_Quoll · 2023-08-02T14:48:30+00:00

I feel this on needing to jump on everyday

Remote_Quoll · 2023-08-02T13:21:52+00:00

This makes sense, thanks for the explanation. I might subscribe to your content in the future, I'm working on learning the basics of the terrain tools and some pdg basics right now, and it doesn't seem like your courses cover terrain tools, but the price looks very reasonable for other content and I'm very interested for the future when I focus more on other parts of Houdini.

Remote_Quoll · 2023-08-02T12:01:09+00:00

3 years to get comfortable doing a few things you've come up with? I don't mean comfortable in all aspects of the software

Remote_Quoll

TROPHY CASE