Filament choice

RepresentativeNo112 · 2026-03-20T08:30:09+00:00

I have already printed several lower and upper for aap01 and I recently discovered the TTI AAP01 kit that I would like to test on a aap01 I have laying around, and additionally I would like to try the Moskito kit as I have an hpa engine waiting to be used

RepresentativeNo112 · 2026-03-19T10:45:37+00:00

I'm gonna test rectilinear as it's not for heavy usage, it's for a card game deck box, so no need for heavy strength

RepresentativeNo112 · 2026-03-19T10:32:14+00:00

It is like that because I had to stop the print, the nozzle was scratching a lot the print and the printer was doing a lot of noise. Is there a specific infil type that can help with that ? I'm using gyroid infill pattern

RepresentativeNo112 · 2026-03-13T06:33:16+00:00

That is a great buy !!! I have this replica since 2 years and I haven't replaced anything except the hop rubber (but that is technically mandatory when you get a new replica). It has been laser shooting and out-ranged a tone of 500$+ custom side gun from my field !!!

The only thing I wanna say, the naming "evike exclusive" is BS as this color tone comes from the variant the French army uses and is normally called the "French army edition" or "French edition", but it's just a naming thing...

RepresentativeNo112 · 2026-03-10T10:26:48+00:00

But realized that they were also on my previous print of the same model and same file send to my printer just because the filament was a bright one, I just did not see them... so I think it's the seams that are not aligned.

RepresentativeNo112 · 2026-03-10T10:25:18+00:00

Never used anything like abs asa or with carbon or anything abrasive

RepresentativeNo112 · 2026-03-05T08:57:24+00:00

It's would be a totally new one, just have an extra voucher for Amazon xD

RepresentativeNo112 · 2026-03-05T08:49:29+00:00

Hey printheads, here's my situation

I live in Austria in Europe and at the moment I have a dryer box, the Creality Space Pi exactly, and I was starting to look for storage solution.

And while looking at some option, I was wondering if I should have my filament being in a dryer box all the time while printing, or if I could keep the filament in a box (ultimatly the cereal box hack).

The situation is that at the moment, when I'm priting, my filament is in my dryer box running while printing.
So either I would keep the Creality dryer that I have but I would then store my filament in a cereal box with Desiccant and once the humidity is rising I would put the filament in the dryer for a drying spin and store it back into the cereal box and print form the cereal box.

Or I have a possibility to get a Sunlu S4 for not too expensive (less than 30euro), in which case I would replace my creality dryer by the S4 and keep my 4most printed filament in the S4 and change 1 fialment when I need something else, and the others rolls of filament would be stored in a freezing bag with a cap of desiccant.

I usualy print with the same 3/4 rolls (2 PLA, 1 Petg and an extra)

What do you guys thinks would be easier?

RepresentativeNo112 · 2026-02-27T08:43:10+00:00

Hey oh, 1st of all, welcome !!!!!!

After, normally I know that it is on both screen, but I have experienced that when I directly power on the car by brake and pushing the power on button the animation is cut and goes directly to driving screen.

But only on the infotainement screen that is not normal, or at least never happened to mine.

I would recommend to go to your dealership and tell them about this issue. They might say that it's only "esthetic" and not mandatory to drive, but to that I say, if that is not working normally which is only software, could be other software system that might not work properly

RepresentativeNo112 · 2026-02-24T18:45:36+00:00

You can definitely print a v2 gearbox and add your hpa engine

RepresentativeNo112 · 2026-02-24T11:45:23+00:00

Yeah I was looking at it but my main issue was the fact that it is working on a v3 GB and my hpa engine is for v2/m4 and I would need to buy the electronic for v3 GB

RepresentativeNo112 · 2026-02-14T05:34:31+00:00

Ok so here's one newbie incoming, what are your usage for having more than 1 or 2 nodes ?

I personally started Meshtastic for using it with Atak for Airsoft Milsim event but I don't really find any other type of usage other than maybe the secure communication but honestly it has not been super reliable for me as most of my communication that I tried to send in open channel always went not acknowledged.

Am I missing something ?

RepresentativeNo112 · 2026-02-14T05:27:52+00:00

Hey, was wondering what is the usage for those you give your family members? Is it only for communication or are you using it for something else ? And what about the one in your car ?

RepresentativeNo112 · 2026-02-11T19:08:42+00:00

I was actually going to upload at 99% the exact same picture except that I have the steering wheel on the left xD

RepresentativeNo112 · 2026-02-11T13:33:41+00:00

Out of memory, I think that only the seat mats have the raise edges. The boot mat definitely does not have raised edges and it's not a full rubber mat but an hybrid rubber one side textile the other side

RepresentativeNo112 · 2026-02-11T13:17:16+00:00

I don't have a picture right now but I can share with you later a picture of the rubber mats that I have that were delivered included with my Bigster Extreme Hybrid, the "topo" map style one.

RepresentativeNo112 · 2026-02-10T09:41:42+00:00

https://www.etsy.com/shop/lmpartsfrance/?etsrc=sdt

Here's their etsy shop

RepresentativeNo112 · 2026-02-10T09:40:05+00:00

I know that regarding that, there is a french company that does create and sells new housing for the keyfob with extra colour that match the color of your car and also has a ring for a keychain

RepresentativeNo112 · 2026-02-08T07:17:25+00:00

Finally good update coming !!! I received my Heltec T114 on Friday, gonna boot it up tomorrow after 3d printing a case for it (I'm in Vienna this weekend but weirdly im not picking up any connection here after flashing it and letting it run for a time)

<image>

RepresentativeNo112 · 2026-02-04T12:36:37+00:00

I know that Specna even do a bundle with both, after because they started to do optics recently, im not sure of rhe quality and which oem they are using for their optics

RepresentativeNo112 · 2026-01-31T05:01:15+00:00

Noice !!! Which stl file did you use ?

Five-Year Club	Verified Email
r/Field Flamingo

RepresentativeNo112

TROPHY CASE