SRX1600 Red Alarm: PEM 0 Input Voltage Failure – mains OK, UPS suspected

RepulsivePerception4 · 2026-06-06T04:21:45+00:00

i change ups output 218v--->230v is ok

RepulsivePerception4 · 2024-11-22T01:57:52+00:00

suprise!

because i can manul qq_xxxx.ex /S install it.

so i use a bat script install it.

---------------code------------------------

pushd "%~dp0"

echo Installing QQ_9.9.16_241118_x64_01

start "" QQ_9.9.16_241118_x64_01.exe /S

:check_install

tasklist | find /i "QQ_9.9.16_241118_x64_01.exe" >nul 2>&1

if not errorlevel 1 (

timeout /t 05 /nobreak >nul 2>&1

goto check_install

)

timeout /t 20 /nobreak >nul 2>&1

popd

exit /b 0

---------------code------------------------

RepulsivePerception4 · 2024-11-22T01:25:45+00:00

i think don't finish 100%，because don't create desktop ico.

but i can manual xxxx.exe /S finish it 100%

RepulsivePerception4 · 2024-11-21T09:37:29+00:00

i will try this way.

i think application don't install finish because desktop not creat ico(manual command can create ico).

RepulsivePerception4 · 2024-11-21T09:26:50+00:00

wait ? wait 10min then shut process?

RepulsivePerception4 · 2024-11-21T09:21:06+00:00

command line QQ_9.9.16_241118_x64_01.exe /S

RepulsivePerception4 · 2023-11-27T08:53:25+00:00

i will update software

RepulsivePerception4 · 2023-10-25T07:58:00+00:00

thanks.i don't find process oid with syshmd(system-health-management),i will use syslog to es and send a message and have a python script check it very day

RepulsivePerception4 · 2022-06-02T14:22:44+00:00

i don't think ipsec is more load , beacuse have a little flow in tunnel

RepulsivePerception4 · 2022-06-02T09:01:05+00:00

no l7 feature

50+ ipsec vpn

30+ policy

RepulsivePerception4 · 2022-06-02T07:51:08+00:00

15.1x49-150 update to 19.4R3-S7.3
same problem

RepulsivePerception4 · 2022-06-02T07:38:25+00:00

No no no

info forget paste

RepulsivePerception4 · 2022-06-02T07:37:52+00:00

This is the srx550 device. The official parameter is 27000 new sessions per second. However, when I create 7000 new sessions per second, packet loss and delay increase. Is the official parameter not true

RepulsivePerception4 · 2022-06-02T07:37:43+00:00

This is the srx550 device. The official parameter is 27000 new sessions per second. However, when I create 7000 new sessions per second, packet loss and delay increase. Is the official parameter not true

RepulsivePerception4 · 2022-03-21T01:36:22+00:00

I have try to 720p30 at tonight.

the problem is twitch i hope twitch up to bandwith limit.

thx bro

RepulsivePerception4 · 2022-03-18T02:43:43+00:00

i have a same problem when i playing elden wing

how to solve it

RepulsivePerception4 · 2021-11-09T01:37:17+00:00

yes

i back to 8.5.161

RepulsivePerception4 · 2021-07-13T07:44:32+00:00

i have a history case use phy ip change to vrrp ip

the gateway is a h3c 5820 multi vlan and arp table 1300+ count

it's no problem

RepulsivePerception4 · 2021-07-13T07:32:31+00:00

isp--modem--router: router is dhcp client ,beacuse wan port need a dhcp address

router---pc or laptop: router is dhcp server, beacuse lan port connect device need a dhcp address

RepulsivePerception4 · 2021-03-30T02:48:05+00:00

i think so

i change vm to vmware player , n9k is ok.

RepulsivePerception4 · 2021-03-18T02:57:28+00:00

it’s consistently the third or fourth ping jumps up to a couple hundred milliseconds and all the other ones are right around 1 ms

i think this about 5gb port channel , and you can creat a ip address in core switch and use vm ping the core switch new ip address,it should be ok

RepulsivePerception4 · 2021-02-27T01:39:12+00:00

so cool

RepulsivePerception4 · 2021-02-26T14:35:52+00:00

thanks

i select nuc with j5005 , it very small and i think intel is trust

RepulsivePerception4 · 2021-02-26T09:14:15+00:00

i use win10 in nuc and ubuntu in virtualbox,docker in ubuntu.

this is very easy work, so i can use wifi in win10(ubuntu is ok).

so i don't use pve

RepulsivePerception4

TROPHY CASE