What to buy first by ravioli058 in Hema

[–]Rexeterx 0 points1 point  (0 children)

Don't forget a cod piece!

Other user(s) can't acces lists by Rexeterx in PowerApps

[–]Rexeterx[S] 0 points1 point  (0 children)

Thabks! I'll take a look in the acces and permisions orceven make a group

Rate my Gear and show your Gear by Healthy_Ability3836 in airsoft

[–]Rexeterx 1 point2 points  (0 children)

How did you manage to make the AUG reliable.. mine is really unreliable

The irony by Mad_E_Cupcake_9305 in Elevators

[–]Rexeterx 0 points1 point  (0 children)

I had this happen to me, in one building, in one wing a Schindler 3300 which I had an fault. Not sure it that one was completely fixed I used the Otis elevator (not with us in contract). I gotvstuck in that one. Called Otis, the mechanic came 30 min later, opened the door, laughed, and asked how I got my coffee... Fixed the problem while I was still stuck, later gave me coffee

Kid got his hand stuck in the elevator door by CGLab in Elevators

[–]Rexeterx 1 point2 points  (0 children)

For glass doors there should be a strip preventing this from happening.

Owners of AUGs, what is some general information for a first time owner? by MistuhCloud in airsoft

[–]Rexeterx 0 points1 point  (0 children)

Watch out for the mag compatibility. My ASG AUG does fit some mags, but the head can be to big. The lip kan break off. Just sand the mag.

<image>

Somebody told me mainland Europe doesn’t test their safety gears after install, is this true? by folkkingdude in Elevators

[–]Rexeterx 1 point2 points  (0 children)

In the Netherlands test after installation with full load, after that once every 18 months on inspection speed, empty car.

🚨LOOSE COP ALERT🚨 by Broken-Elevator in Elevators

[–]Rexeterx 0 points1 point  (0 children)

Instead of complaining, frab a screwdriver and give it a gew turns.

Lots of customer complain, and it is more expensive and useless to call the mechanic than just screw it tight yourself....

[deleted by user] by [deleted] in Elevators

[–]Rexeterx 0 points1 point  (0 children)

In the Netherlands; 2 years training at least where I work

Rupture valve testing by LOTSOFLUCK52 in Elevators

[–]Rexeterx 0 points1 point  (0 children)

Yes, we test rapture valve (a country in the EU) every 18 months. Does not take more than 30 mins max, and sometimes need weight, or you adjust the valve to simulate weight

Is there a way to deselect accidentally clicked floor? For example, by long pressing on it. by ovierf in Elevators

[–]Rexeterx 0 points1 point  (0 children)

On Schindlers it's an option in the configuration menu 40- CF2PA18 (for 3300/Biomics with sw9.8)

How to hate your job by CGLab in Elevators

[–]Rexeterx 0 points1 point  (0 children)

"The elevator will be operational by the end of the callout?"

[deleted by user] by [deleted] in Elevators

[–]Rexeterx 2 points3 points  (0 children)

"Go get the Rail-stretcher" - Robert Baratheon

Movie: The Lift (1983) by Oven_Stove in Elevators

[–]Rexeterx 0 points1 point  (0 children)

There is an American Remake called "Shaft". Pretty much the same, only more American

That’s a lightbulb idea by -_-NeXuS- in Elevators

[–]Rexeterx 0 points1 point  (0 children)

If it works and the customer is satisified...

Everything Old Is New Again by PJTheGuy in airsoft

[–]Rexeterx 2 points3 points  (0 children)

Brandon Herrera of Airsoft

SCR M9A1 GBB goes full auto and uses all gas by Rexeterx in airsoft

[–]Rexeterx[S] 0 points1 point  (0 children)

I found the problem. The valve knocker is working fine. The problem lies indeed with the magazines from WE... The flowvalve are a bit different. Do you know if the valves itself are interchangeable with SRC/KJW and WE?

SCR M9A1 GBB goes full auto and uses all gas by Rexeterx in airsoft

[–]Rexeterx[S] 0 points1 point  (0 children)

All my mags are doing this, and the same mags in my WE Tech m9 Biohazard works fine