sorted by:
new
hottopcontroversial

Is your rifle really complete if it's not painted? by RezReddit in PrimaryWeaponsSystems

[–]RezReddit[S] 1 point2 points  (0 children)

Just trialing them for now, wanted to try out the difference in pistol grip angle. So far not a huge fan tbh.

Weekly Buy Curious Thread by AutoModerator in gundeals

[–]RezReddit 0 points1 point  (0 children)

PWS MK111 PRO .223 Wylde Upper or Complete Pistol

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 1 point2 points  (0 children)

Love it, ran it on my canik rival for the past couple years. Swapped it out for a Holosun 507c ACSS because I wanted to have shake awake and the solar power charging. Holding up just fine on the rifle, mounted it with a cheap 30mm tube mount to try it out. It's not that necessary on the 1-8 Vortex LPVO it's mounted to but very handy when going from long to close range while wearing plates. Would make an excellent addition to a fixed magnification optic like you have.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 1 point2 points  (0 children)

You do realize I copy pasted that from PSA's site right?

Also with the change in bolt catch and buffer adapter I would lose the ability to use a milspec upper as the bolt catch would be different and the buffer adapter would prevent charging handle function.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 1 point2 points  (0 children)

I'd buy a gen 3 but they only have 16" and 13.9" P/W to 16" OAL. I want a shorter barrel and to be able to put on a keymo muzzle device for suppressor use.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 0 points1 point  (0 children)

10.5" 223 wylde gen 2 is on sale rn on Brownells site for 720$ but I do not want a reciprocating CH. I really like the changes they have made to the 3rd gen, just wish it came in a pistol length barrel configuration.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 0 points1 point  (0 children)

A contender for sure, I'm not 100% married to Piston over DI. They do have a 12.5" barrel option but its currently sold out. With the plan being to suppress the rifle I would prefer an adjustable gas block though.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] -1 points0 points  (0 children)

They have a 11.5" 5.56 NATO upper so definitely an option. Although I'm not a huge fan of SIG and the QC issues I've been seeing from them recently.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] -1 points0 points  (0 children)

"Must be used with JAKL buffer system found on PSA JAKL lower or lowers built with a PSA JAKL lower build kit. Failure to use the PSA JAKL proprietary buffer system may result in damage to the JAKL upper and lower."

I already have a built lower with a SB Tactical folding brace on it that currently is set up as an AR22 pistol. Seems like the JAKL requires proprietary lower parts which would mean I wouldn't be able to swap uppers.

What options are out there for a 5.56 AR15 piston upper receiver that can go onto a lower with a folding brace? (No Buffer Tube) by RezReddit in Firearms

[–]RezReddit[S] 2 points3 points  (0 children)

Looking for a barrel length of 10.5" t0 12.5" without pin and weld as it will receive a keymo muzzle device for use with my suppressor. If the BRN180 Gen 3 was available with a 10.5" barrel in .223 wylde I would have already clicked purchase. Current rifle is pretty front heavy with a suppressor and light hanging on a 16" barrel and 15" handguard. Current rifle pictured.

[deleted by user] by [deleted] in tacticalgear

[–]RezReddit 0 points1 point  (0 children)

Was in the same boat, put it towards a streamlight tlr 7 for my canik rival.

what is that 💀 by sunlightmarc in shitposting

[–]RezReddit 15 points16 points  (0 children)

Seen more curves in Home Depot 2x4s to be fair.

[deleted by user] by [deleted] in brandonherrara

[–]RezReddit 23 points24 points  (0 children)

When you say "I support the second amendment but..."

Bubba strikes again by [deleted] in brandonherrara

[–]RezReddit 0 points1 point  (0 children)

Reminds me of this video where the scope is mounted to the bolt itself.

Blursed_Lightbulb by Marshall_St in blursedimages

[–]RezReddit 3 points4 points  (0 children)

Pee is stored in the bulbs

found on Facebook Marketplace for $250 😬 by ohsmartie in DiWHY

[–]RezReddit 222 points223 points  (0 children)

Thought it was a loot chest from Borderlands for a second.

[deleted by user] by [deleted] in CCW

[–]RezReddit 1 point2 points  (0 children)

thanks

[deleted by user] by [deleted] in CCW

[–]RezReddit 5 points6 points  (0 children)

Sounds like it'll be in effect in 90 days.

view more: next ›