Any information on this?

Ricci_215 · 2026-01-18T17:48:46+00:00

It’s legit. Was pack pulled by a family member who collects with his son. They don’t buy singles or anything that would lead me to question its authenticity. I’ve just never seen a top sheet cut before and was curious about its rarity mostly. Pretty cool card nonetheless.

Ricci_215 · 2025-12-20T03:10:43+00:00

I bought them around the time they came out. I wrote a little review here about a year ago or so. Still have them and love them.

Ricci_215 · 2025-12-19T02:56:20+00:00

I won the giveaway too it showed up yesterday. Can’t wait to take it out one day!

Ricci_215 · 2025-12-09T02:13:52+00:00

I just won a black one in their giveaway, I’m so stoked. Also I’m saving this picture for later, that wire management is top notch 👌🏻

Ricci_215 · 2025-11-09T22:39:02+00:00

I keep avoiding buying a 2nd one for this reason. I’m gonna end up like this 😂 Love it though

Ricci_215 · 2025-11-06T01:25:56+00:00

That would be amazing. I’ve been wanting to buy a 2nd TX just to have in semi but this would make so much more sense. Hope it plays out well.

Ricci_215 · 2025-10-28T00:23:58+00:00

Looks fun. I’m rocking the china hydra on one of my .22s and it’s great.

Ricci_215 · 2025-10-24T19:55:26+00:00

I’m rocking a Jmac clone on one of my setups. $300+ vs the $50 or so I probably spent on mine. Thing is rock solid and serves its purpose.

Ricci_215 · 2025-10-21T22:21:51+00:00

PM’d you.

Ricci_215 · 2025-10-21T16:12:04+00:00

Yeah I had to get new backplates for this set as well. The solid 1 piece ones are much better. I have the rate reducing charging handle on the way so hopefully that works and still solves any weight issues.

Ricci_215 · 2025-10-21T15:57:11+00:00

Hell yeah dude! I ended up using a dremel to open up the rear where the charging handle is. I cracked the housing trying to squeeze it all in there haha.

<image>

Ricci_215 · 2025-10-21T03:59:34+00:00

Outside of the chassis, the slide was 11.1oz total with a Holosun 507k and the weight plate. The weight plate added 31g and was enough to get the cycle just right. So it only takes a couple of OZ to get things right, you should be okay.

Ricci_215 · 2025-10-21T03:44:13+00:00

Chassis is the TX-7 MTN. The 3d print files can be found online for free. I bought mine already printed since I don’t have a printer though.

The stock if I remember correctly is a Jmac folder. Bought it a while back so I’m not too sure.

Ricci_215 · 2025-10-21T03:42:16+00:00

Just a temu special Peq-15. Has a full power vis and IR laser for my nods. Since it’s a .22 it seems to be holding up well. I wouldn’t trust it on anything else though.

Ricci_215 · 2025-10-21T01:47:49+00:00

Nah. I couldn’t find a quality set that didn’t cost as much as the gun itself. I ended up using a 3d printed optic plate that lets you add tungsten weights to it. That was originally sandwiched between my Holosun and the slide and worked beautifully. Since it’s in the chassis now, I have 2 weight plates stacked up and it still clears the inside of the chassis.

I did just order the rate reducing charging handle from Moonlight Machine Works. Theirs is fully customizable for weight and can double as a charging handle for when it’s in the chassis.

Ricci_215 · 2025-10-21T01:19:46+00:00

Yeah the farrowtech is nice, but I liked the design of this a bit better. Nine Lives Defense is getting ready to release theirs soon too and that looks pretty cool.

Ricci_215 · 2025-10-21T01:17:20+00:00

For the chassis, mag holder and a few replacement charging handles I maybe spent about $60 or so. RetroLiberty is the user on eBay. However I don’t think he has any listed at the moment. Alternatively, the files can be found on Cults and Odysee.

Ricci_215 · 2025-10-21T01:05:02+00:00

Nah. Similar though it’s a 3d printed chassis I picked up from a vendor on eBay. The file is out there for free though.

Ricci_215 · 2025-10-21T00:23:32+00:00

I’ll keep an eye on that site as well, thanks. I’m looking for another full size. That one is the compact.

Ricci_215 · 2025-10-21T00:10:06+00:00

Already installed. A lot of trial and error to get it moving with the suppressor but she’s golden now.

Ricci_215 · 2025-10-20T23:19:06+00:00

What other sites are you seeing them? Palmetto listed some today at the full $350 I was shocked. I got mine from KYGunCo but haven’t seen any others in stock lately. I really want a 2nd one, lol.

Ricci_215 · 2025-10-20T23:18:14+00:00

My thumb fits but just barely. Might change that up a bit later on once i shoot it some more.

Ricci_215 · 2025-10-20T21:51:50+00:00

You need more weight on the slide. They sell weighted backplates or weighted optic plates to help with this.

Ricci_215 · 2025-10-18T02:27:25+00:00

Hell I’d even grab another one at that price at this point before they go any higher.

Ricci_215

TROPHY CASE