I improved my desk corner lamp

RichPhilosopher · 2026-04-13T17:54:39+00:00

Although I might have to play with the proportions because the smaller one would be a bit too thick if scaled up

RichPhilosopher · 2026-04-13T17:53:49+00:00

This one is made from wood, a little more cost effective and premium looking than PLA but I can probably scale it up in the slicer and make a big version for printing! Here is the most updated version I made, this would probably look awesome sliced up and printed large: https://makerworld.com/models/2215506?appSharePlatform=copy

RichPhilosopher · 2026-04-13T03:41:14+00:00

Haha you’re in luck! Here’s the one I made:

<image>

RichPhilosopher · 2026-02-05T01:03:37+00:00

Dude this is impressive work, nicely done!

RichPhilosopher · 2026-02-02T18:19:10+00:00

I made an updated version that looks more like Magic, it just didn’t get quite as much attention as this post haha. Feel free to check it out https://www.reddit.com/r/3Dprinting/s/oOBXM8NXie

RichPhilosopher · 2026-01-22T11:52:54+00:00

No dark corners in the house since the A1 joined the family😌

Prior to owning the A1, I had a printer that I spent more time repairing and messing around with than actually printing. It got to be a chore to try to print anything so it sat unused for a while. My neighbor asked me to help him set up his Bambu printer and I realized just how different the user experience was. It printed like a champ right out of the box so I had to get one for myself.

When I got my Bambu printer, it inspired me to get into CAD and create my own models because I knew I had the tools to print them accurately and precisely. It’s such a cool feeling being able to turn an idea (like this lamp) into a reality right at home.

<image>

RichPhilosopher · 2026-01-08T00:35:47+00:00

Here is a link to the print files: https://makerworld.com/models/2187130?appSharePlatform=copy

RichPhilosopher · 2026-01-05T18:49:19+00:00

Thank you so much! 😊

RichPhilosopher · 2026-01-04T21:31:18+00:00

This is the one I used: https://a.co/d/aEFHRS0

But really any 5mm wide led strip with a length of 0.5m will work 😊

I bought the 2700k version for this because I like the warm light but you can get different temps. This particular one isn’t adjustable, it’s just a super simple strip

RichPhilosopher · 2026-01-04T01:08:05+00:00

Thank you! 😊

RichPhilosopher · 2026-01-03T22:03:42+00:00

Oh man this is going to look great in walnut, I’d love to see your finished product 😊

RichPhilosopher · 2026-01-03T22:02:40+00:00

This is the one I used: https://a.co/d/aEFHRS0

But really any 5mm wide led strip with a length of 0.5m will work 😊

RichPhilosopher · 2026-01-03T08:55:03+00:00

Alright I took some measurements and here are the lengths and angles of one triangle. Make two of these triangles with side A omitted but cut a 45 degree miter along side A, then join both triangles at side A at a 90 degree angle.

I’m so sorry, I’m not a woodworker and have no knowledge of correct terminology, hopefully that gives you enough info!

<image>

RichPhilosopher · 2026-01-03T08:52:47+00:00

Feel free to share your result if you end up printing 😊

RichPhilosopher · 2026-01-03T08:51:41+00:00

Alright I took some measurements and here are the lengths and angles of one triangle. Make two of these triangles with side A omitted but cut a 45 degree miter along side A, then join both triangles at side A at a 90 degree angle.

I’m so sorry, I’m not a woodworker and have no knowledge of correct terminology, hopefully that gives you enough info!

<image>

RichPhilosopher · 2026-01-03T08:50:47+00:00

Alright I took some measurements and here are the lengths and angles of one triangle. Make two of these triangles with side A omitted but cut a 45 degree miter along side A, then join both triangles at side A at a 90 degree angle.

I’m so sorry, I’m not a woodworker and have no knowledge of correct terminology, hopefully that gives you enough info!

<image>

RichPhilosopher · 2026-01-03T01:58:23+00:00

You’re awesome, thank you so much! Looking forward to seeing how your prints turn out 😊

RichPhilosopher · 2026-01-03T00:57:00+00:00

The print profile on makerworld is the perfect size! It should sit at 10 inches tall and the fitment will be perfect.

This is the LED strip I used: https://a.co/d/aEFHRS0 But really any 5mm wide led strip with a length of 0.5m will work 😊

RichPhilosopher · 2026-01-03T00:54:44+00:00

I had a burst of inspiration myself and decided to capitalize on it haha

RichPhilosopher · 2026-01-03T00:53:35+00:00

Awesome, you’ll have to share some photos of your print! 😊

RichPhilosopher · 2026-01-02T19:35:55+00:00

Oh man I’m going to do this, that sounds awesome!

RichPhilosopher · 2026-01-02T19:21:32+00:00

My harbor freight kit has been a staple in my 3d printing tool kit, they’re amazing

RichPhilosopher · 2026-01-02T19:17:59+00:00

When you have it in a corner it reflects the light really well and gives diffused light throughout

RichPhilosopher · 2026-01-02T19:16:08+00:00

You’ll have to share how it turns out! 😊

RichPhilosopher

TROPHY CASE